• Journal of Photoscience
• /
• v.12 no.2
• /
• pp.95-100
• /
• 2005

We have synthesized an azobenzene-containing polymer (PEA) and a stilbene-containing polymer (PAS) with second-order nonlinear properties. The second harmonic coefficient ($d_{33}$) of the poled polymer films was 84 and 36 pm/V for of PEA and PAS, respectively. The poled state of these polymers was stable at least up to 30 h at room temperature. $T_g$ of these polymers appeared in the range from 120 to $160^{\circ}C$ and onset of initial weight losses in the range from 260 to $270^{\circ}C$. Silicon moieties in the main chain enhanced the solubility of PEA and PAS in common organic solvents such as chloroform, N-methylpyrrolidinone (NMP), N, N-dimethylformamide (DMF), etc.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1993.10a
• /
• pp.34-35
• /
• 1993

The study was undertaken to investigate the effects of ZnCl$_2$ in polysulfone(PSf)/N-methylpyrrolidone(NMP) on the structure and performance of its membrane. The effects of additives on the performances of membranes have been studied. It has been shown that some low molecular weight additives in polysulfone(PSf) casting solutions have effects on the performances of membranes cast from these solutions. It had been reported that ZnCl$_2$, as the additives-in PSf casting solution, decreases water permeability and increases the rejection rate of its membrane.

• BMB Reports
• /
• v.38 no.1
• /
• pp.24-27
• /
• 2005

The role of 3' exonuclease excision in DNA polymerization was evaluated for primer extension using inert allele specific primers with exonuclease-digestible ddNMP at their 3' termini. Efficient primer extension was observed in amplicons where the inert allele specific primers and their corresponding templates were mismatched. However, no primer-extended products were yielded by matched amplicons with inert primers. As a control, polymerase without proofreading activity failed to yield primer extended products from inert primers regardless of whether the primers and templates were matched or mismatched. These data indicated that activation was undertaken for the inert allele specific primers through mismatch proofreading. Complementary to our previously developed SNP-operated on/off switch, in which DNA polymerization only occurs in matched amplicon, this new mutation detection assay mediated by $exo^+$ DNA polymerases has immediate applications in SNP analysis independently or in combination of the two assays.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.07a
• /
• pp.802-805
• /
• 2001

Conductive polymer is insulator or semiconductor in initial state. Polyaniline(PANI) is a $\pi$-conjugated polymer that shows electric property changes, when it is contact with oxidant/reductor chemicals. Synthesis of polyaniline is used vacuum evaporation method, using by (NH$_4$)$_2$O$_{8}$과 NMP, NH$_2$NH$_2$, HCl, MH$_4$OH, etc. Doped PANI is used such a resistor, addition to graphite is increased conductivity. Applying contact voltage, samples show constant current and contact temperature.e.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1998.11a
• /
• pp.223-226
• /
• 1998

Organic conducting N-methyl phenazinium TCNQ (7,7,8,8-tetracyanoquinonedimethane) ion radical salt was synthesized and characterized by FTIR, EA. After blending this material with PMMA using NMP/DMF, the solution was bar-coated on a PET film and dried at 40$^{\circ}C$. The optical micrograph showed the fibril crystals. The surface resistivity was 10$\^$5/ $\Omega$/$\square$. The conductivity decreased considerably at temperatures above 80$^{\circ}C$, although it decreased slightly at RT and 4$^{\circ}C$.

• Proceedings of the Polymer Society of Korea Conference
• /
• 2006.10a
• /
• pp.377-377
• /
• 2006

Alkoxyamine and thiocarbonyl thio end capped polyethylene (PE) chains were synthesized using a direct and simple approach consisting in reacting di(polyethylenyl)magnesium (PE-Mg-PE) chains with a range of nitroxides and disulfides of thiocarbonyl thio compounds. PE-Mg-PE compounds were prepared by a catalyzed chain growth reaction of ethylene on nbutyloctylmagnesium (BOMg) with a neodymocene complex $(C_{5}Me_{5})_{2}NdCl_{2}Li(OEt_{2})_{2}$. Complete characterizations confirm the introduction of the desired end groups. The controlled radical polymerization (NMP and RAFT) of butyl acrylate mediated by these functional polyethylenes was successful.

• Macromolecular Research
• /
• v.15 no.4
• /
• pp.357-362
• /
• 2007

Polyimide/carbon nanotube (CNT) composite films, for potential use in high performance microelectronics and aerospace applications, were prepared by mixing a polyisoimide (PII) solution and a CNT suspension in NMP, followed by casting, evaporation and thermal imidization. The CNTs were modified by a nitric acid treatment to improve the thermal and electrical properties, as well as to provide good dispersion of the CNTs in a polymer matrix. The formation of functional groups on the modified CNT was confirmed by Raman spectroscopy. Scanning electron microscopy revealed the modified CNTs to be well dispersed in the polyimide matrix, with a uniform diameter of ca. 50 nm. The thermal stability of the films containing the CNTs was improved due to the enhanced interfacial interaction and good dispersion between the polyimide matrix and modified CNTs. In addition, the thermal expansion coefficient of the composites films was slightly decreased, but the dielectric constants increased linearly with increasing CNT content.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1996.10a
• /
• pp.53-54
• /
• 1996

비대칭 분리막의 제조에 있어서는 용매와 비용매의 교환에 의한 상분리 현상을 이용하기 때문에 용매와 비용매의 성질이 막 제조 공정에 중요한 변수가 된다. 고분자 용액에 공용매를 첨가할 경우 용액의 점도, 용매와 비용매의 상호 작용 정도 등의 용액의 성질을 변화시킬 수 있다. 따라서 이들의 변화에 따른 분리막의 구조 변화를 관찰하여 그 상관 관계를 규명하면 분리막의 미세 구조 조절 및 제어가 가능할 것이다. 본 실험에서는 폴리이미드(PI)를 고분자로 사용하였고, 용매로는 NMP, 공용매로는 $\gamma$-butyrolactone($\gamma$-BL)을 사용하여 고분자의 농도가 15 wt%인 용액을 제조하였다. 제조한 용액을 유리판에 균일한 두께로 casting 한 후 물을 비용매로 사용하여 immersion precipitation 방법으로 막을 제조하였다. 제조한 막은 24시간 동안 물 속에 방치하여 용매를 충분히 제거한 후 상온에서 24시간 이상 건조시켰다. 투과도 측정은 soap bubble flow 방법으로 시행하였으며 단면 구조는 주사전자 현미경을 사용하여 관찰하였다.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.11a
• /
• pp.195-196
• /
• 2009

술폰화 폴리아릴렌에테르술폰 공중합체를 기본구조로 한, 6F OH를 알코올 단량체로 사용하여 블록 공중합체를 직접 중합법으로 합성하였다. 이때 각각의 소수성-친수성 소중합체들은 동일한 분자량을 이용하여 합성했으며 그때의 두 소중합체의 몰비는 1:1로 하여 블록 공중합체의 술폰화도를 50%로 고정하였다. N-메틸-2피롤리돈(NMP) 용매 상에서 연료전지용 고분자 전해질 막을 제조하여 이온전도도 및 메탄올 투과도등의 측정을 통하여 최종 블록 공중합체 전해질 막의 기본 특성을 파악했다. 소수성-친수성 소중합체의 분자량을 조절함에 따라 최종 전해질 막의 이온 전도도를 향상시킬 수 있음이 확인되었고, 연료전지 성능 테스트 결과에서도 나피온(Nafion 115)과 비슷한 성능을 보였다.

• Proceedings of the Korean Fiber Society Conference
• /
• 2003.10b
• /
• pp.130-133
• /
• 2003

폴리이미드(poly(imide), PI)는 반복 단위 내에 이미드 그룹을 함유하고 있는 고분자로 매우 강한 물리적인 특성을 지니며 열적 및 화학적 안정성이 매우 큰 고분자이다[1-4]. 그러나 이는 대부분이 불용ㆍ불융하기 때문에 프리커서인 poly(amic acid) (PAA) 용액 상태에서 어느 특정한 형태로 가공한 후 열적 혹은 화학적 방법에 의해 이미드 구조로 전환시켜준다. PAA 용액에 사용되는 용매로는 N,N-dimethylacetamide (DMAc), N-methyl-2-pyrrolidone (NMP), N,N-dimethyl-formamide(DMF) 등과 같이 비등점이 높은 극성 용매들이 사용되어진다. (중략)