• Food Science and Preservation
• /
• v.8 no.4
• /
• pp.481-487
• /
• 2001

Grifola umbellatus was extracted using methanol, and the extract was further fractionated by water and ethyl acetate. Assay of each fraction with MTT [3-(4, 5-dimethylthiazol-2-yl)-2, 5-diphenyltetrazolium-bromide] revealed significant cytotoxicity effect of the methanol extract of Grifola umbellatus against human gastric cancer cell but not normal human lymphocytes. The methanol extract showed the highest antioxidant activity as well. Antimicrobial activity of Grifola umbellants against Helicobacter pylori was higher in method extract than in other fractions. Grifola umbellatus had a significant inhibitory effect on Helicobacter pylori reducing both its growth and urease activity. These results show that the methanol extract of Grifola umbellatus possesses therapeutic potential on gastric diseases.

• Korean Journal of Food Science and Technology
• /
• v.23 no.1
• /
• pp.52-56
• /
• 1991

The browning reaction of sugar derivatives, fructo-oligosaccharide, high maltose syrup(HMS), sorbitol and maltitol, and their effect on the appearance of jam and candy were investigated. The spectrophotometrie scanning of the absorbance between 230 nm and 700 nm could demonstrate the heat induced browning of the sugar derivatives. Fructo-oligosaccharide and HMS showed sharp increase in absorbance at 270-330 nm range by heating at $100{\sim}120^{\circ}C$ for 1 hr but sorbitol and maltitol did not show the increase in absorbance. When the pH was lowered red from neutral to 2.0, the absorbance of HMS and sucrose increased sharply, showing that these substances are relatively unstable in acidic heating compared to fructo-oligosaccharide. The addition of glycine enhanced the browing reaction of fructo-oligosaccharide and HMS, whereas little change was observed with sucrose, sorbitol and maltitol. These browning characterisitcs of sugar derivatives were reflected to the color development of apple jam and candy where they were used. Both fructo-oligosaccharide and HMS increased the yellowness of these products, while sugar alcohols reduced the yellowness compared to sugar.

• Journal of Information Display
• /
• v.8 no.2
• /
• pp.15-19
• /
• 2007

We have studied the effect of host materials on the electrophosphorescence properties by comparing three different host materials such as tris(8-hydroxyquinoline)-aluminum (III) $(Alq_3)$, bis(8-hydroxyquinoline)-zinc (II) $(Znq_2)$, and 4,4'-N,N' dicarbazole-biphenyl (CBP) doped with a red-emissive phosphorescent dye, 2,3,7,8,12,13,17,18-octaethyl-21H,23H-porphyrin platinum (II) (PtOEP). The EL spectra show a strong red emission (peak at 650 nm) from the triplet excited state of PtOEP and a very weak emission from an electron transport layer of $Alq_3$ and a hole transport layer of N,N'-diphenyl-N,N'-bis(3-methylphenyl)-1,1-biphenyl-4,4'-diamine (TPD). We find that the triplet exciton lifetime and the quantum efficiency decrease in the order of CBP, $Alq_3$, and $Znq_2$ host materials. The results are interpreted as a poor exciton confinement in $Alq_3$, and $Znq_2$ host compared with in CBP. Therefore, it is very important for the triplet-exciton confinement in the emissive layer for obtaining a high efficiency.

• Korean Journal of Materials Research
• /
• v.23 no.4
• /
• pp.240-245
• /
• 2013

Electrochemical surface treatment is commonly used to form a thin, rough, and porous oxidation layer on the surface of titanium. The purpose of this study was to investigate the formation of nanotubular titanium oxide arrays during short anodization processing. The specimen used in this study was 99.9% pure cp-Ti (ASTM Grade II) in the form of a disc with diameter of 15 mm and a thickness of 1 mm. A DC power supplier was used with the anodizing apparatus, and the titanium specimen and the platinum plate ($3mm{\times}4mm{\times}0.1mm$) were connected to an anode and cathode, respectively. The progressive formation of $TiO_2$ nanotubes was observed with FE-SEM (Field Emission Scanning Electron Microscopy). Highly ordered $TiO_2$ nanotubes were formed at a potential of 20 V in a solution of 1M $H_3PO_4$ + 1.5 wt.% HF for 10 minutes, corresponding with steady state processing. The diameters and the closed ends of $TiO_2$ nanotubes measured at a value of 50 cumulative percent were 100 nm and 120 nm, respectively. The $TiO_2$ nanotubes had lengths of 500 nm. As the anodization processing reached 10 minutes, the frequency distribution for the diameters and the closed ends of the $TiO_2$ nanotubes was gradually reduced. Short anodization processing for $TiO_2$ nanotubes of within 10 minutes was established.

• Journal of the Korean Society for Heat Treatment
• /
• v.23 no.1
• /
• pp.29-33
• /
• 2010

Titanium nitride (TiN) films were deposited on the polycarbonate substrate by using radio frequency (RF) magnetron sputtering without intentional substrate heating. After deposition, the films were bombarded with intense electron beam for 20 minutes. The intense electron irradiation impacts on the crystalline, hardness and surface roughness of the TiN films. The films irradiated with an electron beam of 300 eV show the small grains on the surface, while as deposited TiN films did not showany grains on the surface. Also the surface harness evaluated with micro indenter was increased up to 18 Gpa at electron energy of 900 eV after electron beam irradiation. In addition, surface root mean square (RMS) roughness of the films irradiated with intense electron beam affected strongly. The films irradiated by electron beam with 900 eV have the lowest roughness of 1.2 nm in this study.

• Journal of the Korean Society for Heat Treatment
• /
• v.22 no.1
• /
• pp.23-26
• /
• 2009

Pt nanotubes with diameter of 200 nm were fabricated by simple and convenient method of Template-Wetting Process. Porous alumina membranes were prepared by 2 step anodic oxidation as the template. To improve wetting properties and lower surface energy, pt solution was mixed with polymer. Polymer was removed completely during annealing. Grain growth process of pt nanotubes during baking and furnace annealing was examined by FE-SEM and XRD.

• Korean Journal of Agricultural Science
• /
• v.26 no.2
• /
• pp.33-38
• /
• 1999

This study was carried out to analyze the genetic polymorphisms of genomic DNA of blood and meat for conservation of the genetic resources and genetic improvement of Korean Native goat. The genetic identification between Korean Native goat and imported goat was examined using RAPD(random amplified polymorphisms DNAs) analysis with 30 Korean Native goat, 10 hybrid, 10 imported goat. 10 Korean native goat meat and 10 imported goat meat. The results obtained from this study were summarized as follows: 1. Genomic DNA from Korean native goat, hybrid and imported goat could be obtained above about 23kb size using 0.5% agarose gel electrophoresis and the ratio of optical density at 260nm to that at 280nm was between 1.7 and 2.0 using UV spectrophtometer instrument. 2. In the results of the gene identification between Korean Native goat and hybrid, and imported goat using RAPD methods with random primer of 110 kinds, only Korean native goat showed a specific band at about 369bp using a random primer OPO-19 (5'-CAA ACG TCG G-3'), but imported goat and hybrid not showed. 3. Also, in the results of the gene identification between Korean Native goat meat and imported goat meat using RAPD methods with random primer, Korean native goat only showed a specific band at about 369bp using a random primer No. 19(5'-CAA ACG TCG G-3'), but imported goat not showed.

• Transactions of the Korean hydrogen and new energy society
• /
• v.23 no.3
• /
• pp.199-206
• /
• 2012

HC-SCR was conducted over Co-Pt/ZSM5 catalyst coated over 200 cpsi cordierite in the condition of atomspheric pressure and $200^{\circ}C-500^{\circ}C$. Weight ratio of Co/Pt determined from EDX analysis was 8/2, which was almost equal to the weight ratio at preparation step. XPS showed that nitrates within cobalt precursor and chlorine withn Pt precursor were removed. TEM result demonstrated that crystallite size of cobalt and Pt was under 5nm. Among these tested hydrocarbon reductants, isobutane ($i-C_4H_{10}$) showed the highest de-$NO_x$ yield of 80% under the condition of the mole ratio of reductant/NOx=1.0 at $180^{\circ}C$. De-$NO_x$ yield from HC-SCR was increased as the carbon number of hydrocarbon reductant was increased. The decrease of bonding energy between C and H of HC reductant played a role to increase of de-$NO_x$ yield, which indicated that the dissociation step of C-H bond of hydrocarbon molecule might be the rate determining step of HC-SCR. The increase of oxygen concentration in the feed resulted in the decrease of de-$NO_x$ yield but the increase of CO and $N_2O$ yield.

• Progress in Superconductivity and Cryogenics
• /
• v.15 no.4
• /
• pp.15-20
• /
• 2013

We investigated the flux pinning properties of both 10 mol% Zr-and Sn-doped $YBa_2Cu_3O_{7-{\delta}}$ (YBCO) films with the same thickness of ~350 nm for a comparative purpose. The films were prepared on the $SrTiO_3$ (STO) single crystal substrate by the metal-organic deposition (MOD) process. Compared with Sn-doped YBCO film, Zr-doped one exhibited a significant enhancement in the critical current density ($J_c$) and pinning force density ($F_p$). The anisotropic $J_{c,min}/J_{c,max}$ ratio in the field-angle dependence of $J_c$ at 77 K for 1 T was also improved from 0.23 for Sn-doped YBCO to 0.39 for Zr-doped YBCO. Thus, the highest magnetic $J_c$ values of 9.0 and $2.9MA/cm^2$ with the maximum $F_p$ ($F_{p,max}$) values of 19 and $5GN/m^3$ at 65 and 77 K for H // c, respectively, could be achieved from Zr-doped YBCO film. The stronger pinning effect in Zr-doped YBCO film is attributable to smaller $BaZrO_3$ (BZO) nanoparticles (the average size ${\approx}28.4$ nm) than $YBa_2SnO_{5.5}$ (YBSO) nanoparticles (the average size ${\approx}45.0$ nm) incorporated in Sn-doped YBCO film since smaller nanoparticles can generate more defects acting as effective flux pinning sites due to larger incoherent interfacial area for the same doping concentration.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.23 no.1
• /
• pp.143-149
• /
• 1994

Carotenoids isolated from orange peels were determined physicocohemical properties with TLC, UV-spectrophotometer and HPLC etc., and the results were as follows . Maximum absorption wavelength of the isolated carotenoids was 415nm when the result was similar to $\beta$-carotene as 423nm. Eight spots were obtianed from TLC, and identified lutein, lycopene, $\alpha$-carotene and $\beta$-carotene with HPLC. The effect pH during the storage period of isolate carotenoids, the period when the amount of pigment retention was over 50% in pH 5, 6 and 7 , after 10 days . The amount of pigment retention was lower in control than in treatment of sugars such as fructose, glucose and sorbitol , but sucrose was similar to the control, Isolated carotenoids were stable to ascorbic acid, and the amount of pigment retention was over 70% after 10 days. The amount of pigment retention in the effect oforganic acid was higher in treated citric acid , lactic acid and tartaric acid than in control, but lower in treated maleic acid and succinic acid. Isolated carotenoids were stable at 50 $^{\circ}C$, and the amount of pigment retention was over 50% at 10$0^{\circ}C$.