• Journal of Pharmaceutical Investigation
• /
• v.40 no.6
• /
• pp.373-378
• /
• 2010

In order to develop a topical preparation which has a high occlusive property with skin moisturization, nano-structured lipid carrier (NLC) systems along with solid lipid nanoparticle (SLN) were designed. Various NLC dispersions were successfully formulated with Compritol 888 ATO as a solid lipid, Labrafil M 1944 CS as an oil, and Tween 80 as a surfactant. The increase of oil content (5 to 50%) led to the decrease in the occlusion factor in the order of SLN > NLC-5 > NLC-15 = NLC-30 > NLC-50. Particle size of lipid particulates was in the range of 100 to 160 nm. NLC-based carbogels were prepared by the employment of humectants such as urea, glycerin, and Tinocare GL to carbomer gel. NLC-30 gel formulations containing 4 or 8 % of lipid particles showed improved occlusive effect in vitro, compared to NLC-free gel base. Even though NLC-free gel base revealed comparable occlusion effect by itself, the occlusion factor of 4 % NLC-30 gel was about 2-fold higher than that of NLC-free gel base.

• Proceedings of the KIEE Conference
• /
• 1999.07d
• /
• pp.1815-1817
• /
• 1999

In this paper, the generation of high pretilt angle in nematic liquid crystal (NLC) by dipping effect on three kinds of the rubbed polyimide (PI) surface was investigated. The generated pretilt angle of NLC increases due to dipping effect before rubbing treatment on two kinds of the rubbed PI surface with side chain. The generated pretit angle in NLC by using dipping effect after rubbing treatment on PI surface with short side chain is high compared to the PI surface with long side chain. The generated pretit angle of the positive type NLC $(\Delta{\varepsilon}>0)$ is higher as than that of the negative type NLC $({\Delta}{\varepsilon}<0)$ by using dipping effect before rubbing treatment on homeotropic layer. The generated pretilt angle of NLC is attributed to perpendicular component of permittivity ${\varepsilon}_{\perp}$ of NLC on rubbed PI surface.

• Journal of Preventive Medicine and Public Health
• /
• v.35 no.3
• /
• pp.205-213
• /
• 2002

Objective : Whether exposure to chronic noise induces an increase in blood pressure, or the development of hypertension, has not been established. A cohort study was performed to identify the effects of chronic noise exposure on blood pressure. Methods : 530 males working at a metal manufacturing factory in Busan, Korea were enrolled for the study. They were monitored for 9 consecutive years, from 1991 to 1999, with an annual health check-up. The subjects were divided into 4 groups, which were determines by noise level categories(NLC) according to noise intensity ; NLC-I: office workers, exposed to noise a level below 60dB(A) ; NLC-II: field technical supporters or supervisors, frequently exposed to workplace noise, wearing no hearing protection device; NLC-III: workers, exposed to workplace noise below 85dB(A), wearing ear plugs or muffs; NLC-IV: workers, exposed to workplace noise over 85 dB(A), wearing both ear plugs and muffs. Results : After controlling possible confoundens, such as baseline age, smoking, alcohol intake, exercise, family history of hypertension, systolic(SBP) of diastolic blood pressure(DBP) and changes in BMI (body mass index), the pooled mean for the systolic blood pressures, over the duration of the study period, were 3.8mmHg, 2.0mmHg and 1.7mmHg higher in NLC-IV, NLC-III NLC-II groups, respectively, than in the NLC-I group. There were no significant differences in the diastolic blood pressures between the groups. Conclusion : This study suggests that chronic noise exposure increases systolic blood pressure independently, among male workers.

• Applied Chemistry for Engineering
• /
• v.26 no.6
• /
• pp.659-665
• /
• 2015

Loading of hydrophobic ${\alpha}$-tocopherol into nanostructured lipid carrier (NLC) was performed for improving its oxidative stability. First, various NLCs with different constituents and mixing ratios were prepared and their characteristics were investigated. While the stable NLCs were made when cetyl palmitate (CP) or glyceryl monosterate (GMS) was used as a solid lipid, the phase separation occurred in the NLCs consisting of stearic acid. Particle sizes of the NLCs were several hundreds of nanometers and the size decreased with increasing the ratio of solvent to lipid. It was examined from DSC thermogram and anisotropy test that the degree of crystallinity of the lipid phase decreased and the lipid matrix became less ordered when octyldodecanol, a long chain fatty alcohol, was added into the solid lipid. The oxidative stability of ${\alpha}$-tocopherol in NLC was remarkably improved compared to that in solution or emulsion under high temperature ($45^{\circ}C$) and UV radiation, which was verified through DPPH test and peroxide value measurement.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1998.11a
• /
• pp.61-64
• /
• 1998

We have investigated the effects of ultraviolet (UV) light irradiation condition and imidization temperature for the generation of pretilt angle in nematic liquid crystal (NLC) on the two kinds of the polyimide (PI) surfaces. High pretilt angle of NLC is generated with oblique p-polarized UV light irradiation of 30$^{\circ}$ on PI surface for 20 min. Also, the high pretilt angle of NLC is generated with oblique p-polarized UV light irradiation of 10-30$^{\circ}$ on PI surface at 20min. The pretilt angle of NLC decreases with increasing the imidization temperature on all rubbed PI surfaces ; the pretilt angle of NLC with oblique p-polarized UV light irradiation of 30$^{\circ}$on PI surface decreases with increasing the imidization temperature. The high pretilt angle of NLC is observed due to high photo-depolymerization reaction by low surface energy at low imidization temperature. We suggest that the pretilt angle of NLC is strongly attributed to the photo-depolymerization reaction with the UV light irradiation condition and imidization temperature.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.11 no.6
• /
• pp.481-485
• /
• 1998

We investigated the generation of high pretilt angle for nematic liquid crystal (NLC) in a cell with obilique non-polarized ultraviolet (UV) light irradiation on mixtured polyimide surface. It was found that the monodomain alignment of NLC is obtained with an angle of incidence of 75∼85 degrees on PI surface. We consider that the monodomain alignment of NLC is attributed to anisotropic dispersion force effect to photo-depolymerization of polymer. We successfully observed that the pretilt angle of NLC is generated above 5 degree with an angle of incidence of 75∼85 degrees. It is considered that the pretilt angle generation NLC is attributed to interaction between the LC molecules and the polymer surfaces.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.14 no.2
• /
• pp.130-132
• /
• 2001

The mechanisms of pretilt angle generation in nematic liquid crystal (NLC) with negative dielectric anisotropy on a rubbed polyimide (PI) surface for homeotropic alignment were studied. The pretilt angle of negative type NLC was smaller than that of the positive type NLC for all rubbing strength regions on the rubbed PI surface. The pretilt angle generated in NLC does not attributable to steric interaction between the fluorine moiety of NLC and the polymer surface on the rubbed PI surface. Consequently, the mechanism of the pretilt angle generation for homeotropic alignment is different from the one for homogeneous alignment.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.11b
• /
• pp.337-340
• /
• 2001

The control of high pretilt angle far nematic liquid crystal (NLC) with negative dielectric anisotropy on the rubbed blending polyimide (homeotropic and homogeneous alignment) surface were studied. High NLC pretilt angle generated on the blending polyimide (homeotropic polyimide and SE-7492 surface was measured and the NLC pretilt angle increases with blending ratio and rubbing strength. However, the NLC pretilt angle generated on the blending polyimide (homeotropic polyimide and SE-150 surface was not varied. The high pretilt angle the NLC using blending polyimide surface can be acheived.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.17 no.5
• /
• pp.526-529
• /
• 2004

The nematic liquid crysta](NLC) aligning capabilities using a-C:H thin film deposited at the three kinds of rf bias condition were investigated. A high pretilt angle of NLC on low substrate rf bias applied a-C:H thin films was observed and the low pretilt angle of the NLC on high substrate rf bias applied a-C:H thin films was observed. Consequently, the high NLC pretilt angle and the good aligning capabilities of LC alignment by the IB alignment method on the a-C:H thin film deposited at 1 W rf bias condition can be achieved. It is considered that pretilt angle of the NLC may be attributed to substrate rf bias condition and IB energy time. Therefore, LC alignment is affected by topographical structure forming strong IB energy.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1998.06a
• /
• pp.267-270
• /
• 1998

In this study, we investigated the generation of pretilt angle for nematic liquid crystal (NLC) in a cell with oblique non-polarized ultraviolet (UV) light irradiation on polyimide (PI) surfaces. It was found that the monodomain alignment of the NLC is obtained in a cell with an angle of incidence of 70∼85$^{\circ}$on PI surface. We consider that the monodomain alignment of NLC is attributed to anisotropic dispersion force effect due to Photo-depolymerization of polymer on PI surfaces. Also, pretilt angle of NLC is generated about 3$^{\circ}$ with an angle of incidence of 70∼75$^{\circ}$. It is considered that the pretilt angle generation in NLC is attributed to interaction between the LC molecules and the polymer surfaces.