• Journal of Magnetics
• /
• 제4권2호
• /
• pp.39-45
• /
• 1999

Sandwich structures of$ Nd_2Fe_{14}B/Fe/Nd_2Fe_{14}B $magnetic films have been grown by a KrF excimer laser (λ=248 nm) ablation technique. Magnetic properties were characterized by varying the thickness of hard ($Nd_2Fe_{14}B$) and soft (Fe) magnetic films and the volume fraction as well. In the (x)nm[NdFeB]/(y)nm[Fe]/(x)nm[NdFeB]/(100) Si structure the thickness (x) was varied from 3.6 to 54 nm, and (y) from 15 to 112 nm. At (y) = 15~20 nm where the volume fraction of Fe corresponded to 61~75%, the sandwich structure exhibited an enhanced Mr/Ms and iHc as well from the result of the exchange coupling between the magnetic layers. Experimentally calculated exchange constant$ (A_s) of A_s = 2.5{\times}10^{-10} J/m$ was estimated using the intrinsic coercivity (iHc) of 1.2 kOe at 5 K for the sandwich magnetic trilayers.

• 한국분말재료학회지
• /
• 제17권1호
• /
• pp.1-6
• /
• 2010

In this study, a convergent heat treatment was performed in certain temperature regions in order to control the microstructures of Nd-rich phases and to reduce thermal stress on grain boundaries which could be caused during expansion and shrinkage of Nd-rich and $Nd_2Fe_{14}B$ phases. The difference of thermal expansion coefficient between $Nd_2Fe_{14}B$ and Nd-rich phases is the mechanism for convergent heat treatment. The Nd-rich phases which were located in junctions could penetrate into the grain boundaries between $Nd_2Fe_{14}B$ phases due to the difference of thermal expansion coefficient. Through the convergent heat treatment, the microcracks that were observed in cyclic heat treatment were not observed and coercivity was increased to 34.05 kOe at 8 cycles.

• 한국수산과학회지
• /
• 제42권6호
• /
• pp.561-568
• /
• 2009

We determined the contents of heavy metals in the muscle of wild and cultured fishes, collected from fish markets located in the eastern (Pohang), western (Gunsan), and southern (Tongyeong) coasts of Korea, from 2004 to 2005. As the results of monitoring the heavy metal contents in spring season, the wild fishes contained the range of Cd (0.01-0.08 mg/kg), Cr (ND-0.28 mg/kg), Cu (0.06-1.53 mg/kg), Hg (0.02-0.16 mg/kg), Mn (0.04-1.15 mg/kg), Ni (ND-0.09 mg/kg), Pb (0.03-0.41 mg/kg), and Zn (1.84-6.61 mg/kg). While for the cultured fishes, Cd (0.01-0.05 mg/kg), Cr (ND-0.17 mg/kg), Cu (0.05-0.61 mg/kg), Hg (0.02-0.13 mg/kg), Mn (0.03-0.17 mg/kg), Ni (ND-0.08 mg/kg), Pb (0.03-0.33 mg/kg), and Zn (2.06-6.20 mg/kg) were contained. In summer season, the contents of heavy metal in the muscle of the wild fishes were as follows: Cd (ND-0.11 mg/kg), Cr (0.01-0.37 mg/kg), Cu (0.21-1.31 mg/kg), Hg (0.01-0.11 mg/kg), Mn (ND-1.47 mg/kg), Ni (ND-0.26 mg/kg), Pb (0.06-0.48 mg/kg), and Zn (2.94-14.38 mg/kg). In comparison, the contents of heavy metal in the muscle of cultured fishes were Cd (ND-0.05 mg/kg), Cr (0.13-0.33 mg/kg), Cu (0.19-0.56 mg/kg), Hg (0.05-0.26 mg/kg), Mn (ND-0.14 mg/kg), Ni (ND-0.58 mg/kg), Pb (0.07-0.45 mg/kg), and Zn (2.43-7.53 mg/kg). Also the fall and the winter season, the heavy metal contents in the fishes showed almost similar with other season, however, Pb was lower and Zn was higher than both spring and summer season. The wild fishes contained the heavy metals a little more than the cultured fishes. We could not observe clear seasonal variation in the heavy metal contents of the fishes. The levels of Hg and Pb in all samples tested did not exceed the maximum permissible levels in the fishes set by the Korean Food & Drug Agency for safe human consumption.

• 한국간호교육학회지
• /
• 제6권1호
• /
• pp.77-91
• /
• 2000

Recent changes in health problems as well as the health delivery system demand expanding nursing roles to improve quality care and at the same time provide cost-effective health services. Nursing leaders of the future will be expected to be excellent care givers who are well prepared as researchers and managers and administrators. The purpose of developing an ND program is to train nursing leaders for the future. The program objective are to demonstrate the role as 1) an advanced practitioner who will provide theory based practice 2) a researcher and manager The target population of the ND program is as follows : 1) Nurses with a BSN degree who are seeking to advance on the career ladder 2) Non-nursing BS, BA graduates who are seeking nursing as a second career 3) Transfer students who are mature and motived to be nursing leaders It is believed that the ND program would meet the diverse needs for potential students, for their role in nursing and the health delivery system and create a meaning and challenging position in the profession of nursing. A task force team was organized to develop the ND program and its activities are as follows; 1) Information on ND programs were collected from 3 universities and reviewed 2)An advanced education needs assessment was completed and it was found that 87.6% of the subjects responded positively about advanced degree work. 3) A tentative curriculum for an ND program was developed. It is a great challenge to develop a new program for nursing however, it is also our task and responsibility to further the development of nursing.

• Asian Pacific Journal of Cancer Prevention
• /
• 제14권9호
• /
• pp.5281-5286
• /
• 2013

Purpose: Prostate cancer caused by the abnormal disorderly growth of prostatic acinar cells is the most prevalent cancer of men in western countries. We aimed to screen out differentially expressed genes (DEGs) and explore small molecule drugs for prostate cancer. Materials and Methods: The GSE3824 gene expression profile of prostate cancer was downloaded from Gene Expression Omnibus database which including 21 normal samples and 18 prostate cancer cells. The DEGs were identified by Limma package in R language and gene ontology and pathway enrichment analyses were performed. In addition, potential regulatory microRNAs and the target sites of the transcription factors were screened out based on the molecular signature database. In addition, the DEGs were mapped to the connectivity map database to identify potential small molecule drugs. Results: A total of 6,588 genes were filtered as DEGs between normal and prostate cancer samples. Examples such as ITGB6, ITGB3, ITGAV and ITGA2 may induce prostate cancer through actions on the focal adhesion pathway. Furthermore, the transcription factor, SP1, and its target genes ARHGAP26 and USF1 were identified. The most significant microRNA, MIR-506, was screened and found to regulate genes including ITGB1 and ITGB3. Additionally, small molecules MS-275, 8-azaguanine and pyrvinium were discovered to have the potential to repair the disordered metabolic pathways, abd furthermore to remedy prostate cancer. Conclusions: The results of our analysis bear on the mechanism of prostate cancer and allow screening for small molecular drugs for this cancer. The findings have the potential for future use in the clinic for treatment of prostate cancer.

• 한국정밀공학회지
• /
• 제28권9호
• /
• pp.1086-1093
• /
• 2011

To fabricate the aluminum alloys with good drawability, the textures evolution of the AA5182 sheets due to the change of lid parameter after rolling and subsequent annealing was studied. The measurement of the deformation textures was carried out for the sheets with high reduction ratio and the change of the recrystallization texture was investigated after heat-treatments of the rolled sheets in various I/d parameters. Rolling without lubrication and subsequent annealing led to the formation of favorable rot-$C_{ND}$ {001}<110> and ${\gamma}$-fiber ND//<111> textures in AA5182 sheets. From the results, the ${\gamma}$-fiber ND//<111> component well evolved during rolling at high lid parameter of 6.77. The initial shear deformation texture, especially, ${\gamma}$-fiber ND//<111> was not rotated during heat treatment in holding time of 180~7,200 seconds on AA5182 with I/d parameter of 6.77. Therefore, the AA5182 sheets were fabricated by controlling I/d parameter having well evolved ${\gamma}$-fiber ND//<111> which was advantageous in good drawability of the sheets.

• 한국광학회지
• /
• 제9권3호
• /
• pp.186-190
• /
• 1998

직경이 10mm인 유리관의 외벽을 금으로 코팅하여 반사체로 사용되고 최대 출력이 140W인 레이저 다이오드바 (laser diode bar) 3개를 여기 광원으로 이용한 고출력 Nd:YAG 레이저를 설계 제작하였다. 레이저봉의 지름은 6mmdlqu 길이는 130mm이다. 투과율이 11%인 출력경과 전반사경을 사경하여 선형공진기를 구성하고 연속발전시켰을 때 약 130W의 Nd:YNG 레이저 연속출력을 얻었으며 이 때 측정된 기울기 43%, 광변환 효율은 31%에 도달하였다. 레이저빔의 빔질인자(beam quality factor)M2는 최대 다이오드 츨력에서 약85로 관측되었으며 레이저 발진시에 측정한 열렌즈 초점거리의 역수와 여기광의 출력비는 5.3∼7.4D/kWpump 이었다.

• Journal of Magnetics
• /
• 제4권2호
• /
• pp.46-51
• /
• 1999

A solid-HDDR characteristics of the Nd-Fe-B-type alloys magnetic properties of the solid-HDDR treated materials have been investigated using three types of alloys; $Nd_{15}Fe_{77}B_8 (alloy A), Nd_{16}Fe_{75.9}B_8Zr_{0.1}(alloy B), and Nd_{12.6}Fe_{68.7}Co_{11.6}B_8Ga_{1.0}Zr_{0.1} $(alloy C). It has been found that the four-components alloy B and six-components alloy C have showed higher hydrogenation temperatures than the ternary alloy A. The alloys A and B appeared to absorb more hydrogen gas more rapidly as well compared to the alloy C. The disproportionation temperature of hydrogenated materials was exhibited no significant difference among the alloys. The thermal stability of the hydrided materials of the three types of alloys was found to become more stable in order of number of components. The disproportionation and the recombination kinetics were significantly sluggish in the solid-HDDR manner with respect to the conventional manner. Some degree of anisotropic nature was found to exist in the ingot and this anisotropic nature was retained even after the solid-HDDR treatment. It was suggested the solid-HDDR treatment may possibly be used for a preparation of an isotropic or anisotropic Nd-Fe-B-type cast magnets.

• Journal of Magnetics
• /
• 제3권1호
• /
• pp.9-14
• /
• 1998

A non-coercive cast Nd-Fe-B-type material can be easily converted into a coercive one by employing HDDR process. Applying the conventional HDDR process to the Nd-Fe-B-type material generally leads to a powder-like material. HDDR treated material in a solid form can, however, be realised if the process is properly modified (solid-HDDR). In the present study, the change of rigidity (compressive strength) of the Nd-Fe-B-type material during the solid-HDDR has been investigated using a homogeneous sintered magnet with composition $Nd_{13.8}Dy_{0.7}Fe_{78.25}Si_{0.15}Mn_{0.6}B_{6.5}.$ It has been found that the low strength of the hydrided material was improved by the subsequent disproportionation. The restoration of the strength was explained by the eutectoid-like disproportionation structure containing fine neodymium hydride rod embedded in tough iron matrix. The high strength of disproportionated material was reduced radically in earlier stage of recombination, and this wes explained by the reduction of the disproportionated phase. The reduced strength was, however, recovered by further recombination, and this was explained by the fact that as the recombination continues the recombined grains adhere together. The optimally HDDR processed material has a comparable or even higher strength with respect to the initial sintered material prior to the solid-HDDR. The present study suggested that the rigidity of Nd-Fe-B-type material could be retained even after the solid-HDDR.

• Metals and materials international
• /
• 제24권6호
• /
• pp.1422-1431
• /
• 2018

We investigated the additional (secondary) cooling effect of casted strips on the magnetic properties of Nd-Fe-B sintered magnets. The Nd-Fe-B sintered magnets were fabricated with the casted strips prepared without and with additional cooling. Additional cooling was achieved by blowing Ar gas at various pressures (0.1, 0.3, and 0.6 MPa) on the free-side surface of the strips during the strip-casting process. The higher magnetic properties of $H_c$, $B_r$, and $(BH)_{max}$ of the final Nd-Fe-B sintered magnets were obtained for 0.1 MPa rather than for 0.0 MPa. The best microstructure of the columnar grains in the casted strips was produced with the aid of a lower pressure of gas on the free-side surface. It was found that the microstructure of the strips affects the distribution of grains grown in the sintered magnets. This report demonstrates that the improved magnetic performance of Nd-Fe-B sintered magnets was achieved via additional gas cooling.