• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.53 no.spc
• /
• pp.108-114
• /
• 2008

Near infrared spectroscopy (NIRS) is a rapid and accurate analytical method for determining the composition of agricultural products and feeds. The applicability of near infrared reflectance spectroscopic method was tested to determine the color value (L, a, b) of green tea. A total of 162 green tea calibration samples and 82 validation samples were used for NIRS equation development and validation, respectively. In the developed NIRS equation for analysis of the color value (L, a, b), the most accurate equation for L value was obtained at 2, 8, 6, 1 (2nd derivative, 8 nm gap, 6 points smoothing, and 1pointsecond smoothing), and for a, and b value were obtained at 1, 4, 4, 1 (1st derivative, 4 nm gap, 4points smoothing, and 1 point second smoothing) math treatment condition with SNVD (Standard Normal Variate and Detrend) scatter correction method and entire spectrum ($400{\sim}2,500\;nm$) by using MPLS (Modified Partial Least Squares) regression. Validation results of these NIRS equations showed very low bias (L: 0.005%, a: 0.003%, b: -0.013%) and standard error of prediction (SEP, L: 0.361%, a: 0.141%, b: 0.306%) as well as high coefficient of determination ($R^2$, L: 0.905, a: 0.986, b: 0.931). Therefore, these NIRS equations can be applicable and reliable for determination of color value (L, a, b) of green tea, and NIRS method could be used as a mass screening technique for breeding programs and quality control in the green tea industry.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.10
• /
• pp.6388-6398
• /
• 2014

To understand size fractioned chlorophyll a and material cycle characteristics in Jeju marine ranching area (JMRA), 4 times of survey were conducted from April to November 2008. Picoplankton on the surface in JMRA was on average, $0.30{\mu}g/L$(annual mean(M):17.3%) in the $0.03{\sim}0.84{\mu}g/L$ range, accounting for 17.3%. Nannoplankton and picoplankton was on average, $1.35{\mu}g/L$(M:78.0%) in the $0.22{\sim}3.93{\mu}g/L$ range, and $1.73{\mu}g/L$(M:4.7%) in the nd ~ 0.24 range, respectively. The 10m layer was similar to the surface. The measured values changed according to the measurement times but the nanoplankton composition ratio was higher throughout the year. In addition, the size fractioned chlorophyll a distribution in JMRA was similar to that of tropical sea area affected by the Monsoon rather than South Korean offshore coast geographically adjacent to the East China Sea and Japan coastal waters affected by the Kuroshio/Tsushima warm currents. That is, the material cycle of JMRA consists of a microbial food web rather than traditional food chain at a lower trophic levels. Primary production is deemed to have a higher possibility of being adjusted by top-down dynamics, such as micro-zooplankton grazing pressure rather than nutrients supply.

• Journal of Embryo Transfer
• /
• v.19 no.2
• /
• pp.127-132
• /
• 2004

Ninety-two heads of sire, ranging from 4 to 8 years old, and semen production records of 8,628 from those sire and the performance and carcass traits from 814 heads of those offspring were used to investigate the relationships of scrotal circumference(SC) of Hanwoo sire to semen characteristics and performance, carcass traits of those offspring. Average SC of sire were 38.7 cm. The semen volume, sperm concentration and total sperm number at first and second ejaculation were 5.63 mL and 5.32 mL, $17.9{\times}108/mL$ and 15.0${\times}10^8$/mL, and 100.3${\times}10^8$/ ejaculation and 79.4${\times}10^8$/ejaculation, respectively. SC is positively correlated with semen volume(1st : ${\gamma}$=0.27, P<0.05 ; 2nd : ${\gamma}$=0.19, P<0.10), sperm concentration(1st : ${\gamma}$=0.21, P<0.05) and total sperm number(1st $:{\gamma}=0.38$, 2nd : ${\gamma}$=0.28, P<0.01). The live weights of those offspring were 49.2, 281.1, 436.3 and 534.4 kg at 6, 12, 18, 22 months old, respectively, and average daily gain(ADG) were 0.81 kg/day. And, carcass weight, longissimus dorsi area, backfat thickness and marbling score were 313.8 kg, 77.9 cm, 0.62 cm and 2.47, respectively. There were tended to be positive relationships between SC of sire and live weight of 6 months old(${\gamma}$=0.08, P<0.10), 12(${\gamma}$=0.18, P=0.10), 18(${\gamma}$=0.21, P<0.10), 22(${\gamma}$=0.20, P<0.10), ADG(${\gamma}$=0.25, P<0.05), carcass weight(${\gamma}$=0.18, P<0.10) and longissimus dorsi area(${\gamma}$=0.18, P<0.10) of those offspring. However, SC and backfat thickness, marbling score have no significant relationship. This results indicate that SC of sire was related to semen production and the gain weight of those offspring, positively. However, further investigation are needed to confirm the results.

• Journal of Trauma and Injury
• /
• v.20 no.2
• /
• pp.57-64
• /
• 2007

Purpose: Clinically, acute respiratory distress syndrome (ARDS) occurs within 72 hours after acute exposure of risk factors. Because of its high fatality rate once ARDS progresses, early detection and management are essential to reduce the mortality rate. Accordingly, studies on early changes of ARDS were started, and serum ferritin, as well the as injury severity score (ISS), which has been addressed in previous studies, thought to be an early predictive indicator for ARDSMethods: From March 2003 to March 2005, we investigated 50 trauma patients who were admitted to the intensive care unit in Dongguk University Medical Center, Gyeongju. The patients were characterized according to age, sex, ISS, onset of ARDS, time onset of ARDS, serum ferritin level (posttraumatic $1^{st}\;&\;2^{nd}$ day), amount of transfused blood, and death. Abdominal computed topography was performed as an early diagnostic tool to evaluate the onset of ARDS according to its diagnostic criteria. The serum ferritin was measured by using a $VIDAS^{(R)}$ Ferritin (bioMeriux, Marcy-1' Etoile, France) kit with an enzyme-linked fluorescent assay method. For statistical analysis, Windows SPSS 13.0 and MedCalc were used to confirm the probability of obtaining a predictive measure from the receiver operating characteristics (ROC) curve. Results: The ISS varied from 14 to 66 (mean: 33.8) whereas the onset of ARDS could be predicted with the score above 30 (sensitivity: 90.0%, specificity: 60.0%, p<0.05). On the posttraumatic $1^{st}$ day, the serum ferritin levels were measured to be from 31 mg/dL to 1,200 mg/dL (mean: 456 mg/dL), and the onset of ARDS could be predicted when the value was over 340 mg/dL (sensitivity: 80.0%, specificity: 65.0%, p<0.05). On the posttraumatic $2^{nd}$ day, the serum ferritin levels were measured to be from 73 mg/dL to 1,200 mg/dL (mean: 404 mg/dL), and the onset of ARDS could be predicted when the value was over 627 mg/dL (sensitivity: 60.0%, specificity: 92.5%, p<0.05). The serum ferritin levels and the ISS were significantly higher on the posttraumatic $1^{st}$ and $2^{nd}$ day in the ARDS group, suggesting that they are suitable indices predicting the onset of ARDS, however relationship between the serum ferritin levels and the ISS was not statistically significant. Conclusion: In this study, we discovered increasing serum ferritin levels in multiple- trauma patients on the posttraumatic $1^{st}$ & $2^{nd}$ day and concluded that both the serum ferritin level and the ISS were good predictors of ARDS. Although they do not show statistically significant relationship to each other, they can be used as independent predictive measures for ARDS. Since ARDS causes high mortality, further studies, including the types of surgery and the methods of anesthesia on a large number of patients are essential to predict the chance of ARDS earlier and to reduce the incidence of death.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.27 no.12
• /
• pp.1673-1680
• /
• 2003

It is essential to operate chemical lasers with supersonic ejector system as the laser output power goes up. In this research, ejector design parameter study was carried out for optimal ejector design through understanding the ejector characteristics and design requirements for chemical lasers operating. Designed ejector was 3D annular type with 2$^{nd}$ -throat geometry and pressurized air was used for primary flow. Ejector design was carried out with two steps, quasi-1D gas dynamics was used for first design and commercial code was used to verify the first design. In this study, to get the effect of ejector geometry on its performance, three cases of primary nozzle area ratio and 2$^{nd}$ -throat cross sectional area and two cases of 2$^{nd}$ -throat L/D ratio experiments were carried out. Primary and secondary pressures were measured to get the mass flow rate ratio, minimum secondary pressure, ejector starting pressure and unstarting pressure at every case. In the result, better performance than design level was shown and optimal ejector design method for chemical lasers was obtained.

• Journal of Pharmaceutical Investigation
• /
• v.32 no.2
• /
• pp.113-117
• /
• 2002

Cyto-toxic effect of silver sulfadiazine (Ag-SD) on keratinocytes and its implication on wound healing process were investigated in $2^{nd}$ degree bum hairless mouse model. As a dermal model, HaCat (immortalized keratinocytes) monolayer culture in DMEM with 10% FBS was used. Cyto-toxicity of Ag-SD was estimated by measuring the cell viability using neutral red assay after adding the drug. The $2^{nd}$ degree bum was prepared on hairless mouse back skin (1 cm diameter) and dressings with Ag-SD were applied for 96 hr. The process of re-epithelialization and the presence of inflammatory cells were investigated and histology with Hematoxylin-Eosin staining was performed. Ag-SD displayed highly cyto-toxic effect on cultured HaCat cells in a concentration dependent manner $(1-100\;{\mu}g/mL)$. Topical application of Ag-SD (2%) could control the infection: no inflammatory cells were observed in histology. However the cyto-toxic effect of Ag-SD on skin cells induced the impairment in epidermal regeneration.

• Fisheries and Aquatic Sciences
• /
• v.11 no.1
• /
• pp.36-40
• /
• 2008

We analyzed the nucleotide sequences of about 500 bp of the mitochondrial NADH dehydrogenase subunit 3 (ND3) gene to estimate the genetic variation of Korean masu salmon (Oncorhynchus masou) populations. DNA samples were collected from 104 river-only specimens and 52 anadromous specimens from three hatcheries and one river. There are no records of artificial release into the river. We amplified the ND3 gene by polymerase chain reaction, targeting areas that included parts of the cytochrome oxidase III gene and the NADH dehydrogenase subunit 4L gene, and defined 14 haplotypes based on 12 variable nucleotide sites in the examined region. Among the haplotypes, ten were specific to river-only specimens within hatchery populations. Haplotype diversity of river-only populations in hatcheries was higher than that of anadromous and wild populations. Pairwise population $F_{ST}$ estimates and neighbor-joining tree analyses inferred that anadromous and river-only populations were distinct. These results suggest that sequence polymorphism in the ND3 region may be a useful marker for analyzing the genetic variation and population structure of masu salmon.

• Proceedings of the KSME Conference
• /
• 2001.11b
• /
• pp.124-130
• /
• 2001

The heat transfer and flow measurements were made on a cylindrical pedestal mounted on a flat plate with a turbulent impinging air jet. The heat transfer coefficient distributions on the flat plate were measured using the shroud-transient technique and liquid crystal was used to measure the surface temperature. The jet Reynolds number (Re) is 23,000, the dimensionless nozzle-to-surface distance (L/d) from 2 to 10, the dimensionless pedestal diameter-to-height (H/D) from 0 to 1.5, the dimensionless 2nd pedestal diameter-to-height ($H/D_2$) from 0 to 0.4 and the distance from the stagnation point to 2nd pedestal (p/D). The results show that for H/D = 0.5 to 1.5, the Nusselt number distributions on the plate surface exhibit a maximum between $r/d\;{\cong}\;1.0$ and 1.5. The presence of the pedestal appears to cause the flow separation and reattachment on the plate surface, which results in the maximum heal transfer coefficient. Also, for p/D = 2.5 and $H/D_2$ = 0.3, the local Nusselt number in the region corresponding to $r/d\;{\cong}\;1.1$ was increased up to 50% compared to that for $H/D_2=0$.

• Journal of Korean Society on Water Environment
• /
• v.28 no.3
• /
• pp.401-408
• /
• 2012

High-voltage dielectric discharges are an emerging technique in environmental pollutant degradation, which that are characterized by the production of hydroxyl radicals as the primary degradation species. The initiation and propagation of the electrical discharges depends on several physical, chemical, and electrical parameters such as 1st and 2nd voltage of power, gas supply, conductivity and pH. These parameters also influence the physical and chemical characteristics of the discharges, including the production of reactive species such as OH, $H_2O_2$ and $O_3$. The experimental results showed that the optimum 1st voltage and air flow rate for RNO (N-Dimethyl-4-nitrosoaniline, indicator of the generation of OH radical) degradation were 160 V (2nd voltage of is 15 kV) and 4 L/min, respectively. As the increased of the 2nd voltage (4 kV to 15 kV), RNO degradation, $H_2O_2$ and $O_3$ generation were increased. The conductivity of the solution was not influencing the RNO degradation and $H_2O_2$ and $O_3$ generation. The effects pH was not high on RNO degradation. However, the lower pH and the conductivity, the higher $H_2O_2$ and $O_3$ generation were observed.

• Proceedings of the KOSOMBE Conference
• /
• v.1990 no.05
• /
• pp.47-50
• /
• 1990

In this study, the degree of spectral transfer to lower frequency caused by accumulation of Latic acid inside the muscle is estimated the convintional dip analysis, zero-crossing method and FFT method have intrinsic errors and estimation problems in case of severe noise. The new spectral analysis method using "$2^{nd}$ order Maximum Entropy Method" was applied to estimate mean frequency and we confirmed that this new method yields fast and reliable estimation over the FFT method.