• ALGAE
• /
• 제22권3호
• /
• pp.235-240
• /
• 2007

The red tide-causing flagellate Chattonella anticfua can cause mass fish kills by their clogging in fish gills. Thisstudy examined the nutrient requirements of C. antiqua isolated from Korea. C. anticfua displayed maximum growthat the day five, followed by a decrease in cell density. Nitrate and nitrite were the preferred nitrogen sources, alonewith adenosine diphosphate for phosphorus compounds. In medium that contained ammonium, a significantdecrease in cell density was observed. Half-saturation constants, Ks, calculated from the maximum growth ratewere 4.94 U|M for NC>3 and 0.79 flM for P04. The growth of C. antiqua was not within the function of the N:P ratio (RU= 0.29). With an N:P ratio as low as 10, the increase in cell density was apparent, with a higher division rate. At lev-els above 50 fiM of NaNOg or 8 ;uM of NaHUPCU, the growth rates were somewhat decreased. Phosphate was thelimiting factor for C. antiqua growth since the starvation of phosphate had brought about a rapid decrease in celldensity in semi-continuous culture. Studies about the temporal modification of the efficiency of nitrate or phosphateuptake may be necessary to explain the bloom dynamics of C. antiaua.

• Journal of Advanced Marine Engineering and Technology
• /
• 제21권4호
• /
• pp.381-386
• /
• 1997

The offsetting method using geometric properties of B-spline control polygon is more faster than using of general normal vector in offset processing. But this method itself does not solve the prob¬lems of loop removal in normal offsetting. Generally the distance between neighborhood spans of B-spline control polygon is greater than the offset distance, the loops are occurred in offsetting. For generating of the more precision tool-path in NC machining, the loops of offset must be removed. In this paper, two methods for loop removal are introduced in offsetting of B-spline curve. One is using the intersection of B-spline control span which being occurred of the loop. The other is using two B-spline curve divisions divided from original B-spline curve or its offset curve. After the inter¬section point of loop was searched, the loop being removed to cusp. Also the method for filleting of cusp is inspected to more precision cutting. It is shown that the offsetting using B-spline control polygon is more effective in the sculptured surface machining.

• 분석과학
• /
• 제8권4호
• /
• pp.865-868
• /
• 1995

The method of matrix-assisted laser desorption ionization mass spectrometry has been used to solve some bioanalytical problems, which is difficult to analyse by general methods. For the selection of proper laser wavelength and matrices, eight matriees was used with laser wavelength of 226 and 355nm. The result shows that with wavelength of 355nm better results could be obtained with most of the matrices. The molecular weight of eytochrome C, which was seperated by gel electrophoresis and electro-blotted onto NC membrane is determined by MALDI. The accuracy is better than 0.1%, which is much higher than that of SDS-PAGE. Protein mixture extracted from crude peanut oil is directly determined by MALDI. The molecuiar weight of its three components are determined, and the result also demonstrated that these proteins are in free manner. As proteins arc in 2S bond, with the traditional method, SDS-PAGE, it is not able to decide whether protein exists in combination mode or in free manner. In the technique of two phase aquesous solution, which is used for separating biomaterials, water soluble polymers stained with dyes are used in this technique. By the use of MALDI the number or the dye molecules react with the polymer PEG molecule are determined, and that is difficult to determined by other methods.

• 한국산학기술학회논문지
• /
• 제11권5호
• /
• pp.1735-1740
• /
• 2010

추진제 KM10은 NC(Nitrocellulose)를 주원료로 제조된 단기추진제로서 장기저장시 자연분해현상을 일으키는 것으로 알려져 있다. 저장수명추정은 잔류안정제 함량분석을 위해 일반적으로 이용되는 고온가속노화시험을 사용하였으며, 반응속도상수 산출을 위해 Arrhenius 식과 Berthelot 식을 사용하였다. 본 연구 결과에 따르면 Arrhenius 식과 Berthelot 식을 이용하여 추정한 추진제 KM10의 저장수명은 43.72년, 16.53년으로 큰 차이를 보였으며, E. R. Bixon의 연구결과[1]와 비교할 때 Arrhenius Equation을 이용하여 추정한 43.72년이 타당한 것으로 판단된다.

• KIEAE Journal
• /
• 제11권3호
• /
• pp.11-18
• /
• 2011

Sustainability became the keyword of our society worldwide, and it is undoubtful that buildings are mainly responsible for green house gas emission and energy consumption. Responding to current needs, US Green Building Council has launched the first LEED rating system in 1998. Since then, LEED has been evolved and it has multiple sub-system categorized by project types. This study aims to analyze characteristics of sustainable neighborhood development and to suggest methodology for establishing certification system in Korea. First, LEED-ND 2009(LEED for Neighborhood Development) was addressed with certified projects by US Green Building Council. After that, LEED-NC 2009(LEED for New Construction) was compared with green building certification criteria in Korea to find out unforeseen aspects by each system, in terms of sustainable neighborhood development. As a result of this study, sustainable neighborhood development requires a transition of architects' responsibility beyond building design. Building technology has been advanced at extremely fast pace, however, applying techniques to individual architecture would not make our town sustainable. This study provided basic resources to understand that creating sustainable neighborhood is social phenomenon and more studies should be undertaken to establish Green Neighborhood Certification Criteria in Korea.

• 한국기계가공학회지
• /
• 제10권2호
• /
• pp.1-8
• /
• 2011

5-axis NC machining has a good advantage of the accessibility of tool motion by adding two rotary axes. It offers numerous advantages such as expanding machining fields in parts of turbo machineries like impeller, propeller, turbine blade and rotor, reasonable tool employment and great reduction of the set-up process. However, as adding two rotary axes, it is difficult to choose suitable machining conditions in terms of cutter path and cutter posture at a cutter contact point. Therefore in this paper, it is proposed to decide suitable machining condition through an experimental method such as adopting various cutter paths, cutter postures types. Also, in order to increase the efficiency of 5-axis machining, it is necessary to minimize the cutter posture changes and create a continuous cutter path while avoiding interference. This study, by using an MC-space algorithm for interference avoidance and an MB-spline algorithm for continuous control, is intended to create a 5-axis machining cutter path with excellent surface quality and economic feasibility. finally, this study will verify the effectiveness of the suggested method through verification processing.

• 한국공작기계학회논문집
• /
• 제11권6호
• /
• pp.1-9
• /
• 2002

This study describes the geometric characteristics and the 5-axis machining method in order to make end mill cutter coming with insert tips. End mill geometry is consisted of flute part and insert tip part. Flute part modeled by using ruled surfaces with constant helix angle, and insert tip part modeled by rectangular planes containing tapped hole of specified direction in its center. In this study, the modeled insert tip part considered both of a radial rake angle and a axial rake angle, because they were important cutting conditions. In order to machining the virtual end mill defined from geometric characteristics, we programmed a special software to machining the end mill considered in this study. This software can generate NC-codes about following processes, end milling or ball end milling of flute part end milling of rectangular plane, centering of hole, drilling of hole, and tapping of hole. Ant sampled end mills were modeled and machined on 5-axis CNC machining center with two index tables. Since machined end mills were very agreeable to designed end mills, we saw that the method proposed in this study can be very useful for manufacturing of end mill body with insert tip.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 추계학술대회논문집
• /
• pp.862-865
• /
• 2004

The system air conditioner has an outdoor unit and a number of indoor units, which connected by several long pipes. In comparison with building HAVC system, the system air conditioner doesn't need lots of facilities, such as control of room, cooling tower, etc. At the beginning stage for the market of the system air conditioner, its main application was a school which size is small to use the building HAVC and large to use home air conditioning system, such as PAC (package air conditioner), RAC (room air conditioner). Therefore, because of the advantages of the system air conditioner mentioned above, the market is expanded rapidly. Since it is difficult to evaluate the noise caused by the system air conditioner because it has to be implemented before the finish of construction, the prediction or estimation of the noise by using CAE technology should be very important. In this research, using a commercial code, RAYNOISE, the noise is estimated to improve the design of building.

• 대한방사선기술학회지:방사선기술과학
• /
• 제47권4호
• /
• pp.271-278
• /
• 2024

This study aimed to evaluate the impact of changes in beam arrangement and arc counts on dosimetric factors in volumetric modulated arc therapy (VMAT) inverse radiation therapy planning for hippocampal-avoidance whole brain radiation therapy (HA-WBRT) by using the Elekta Monaco radiation therapy planning system (RTPs). For coplanar VMAT, both the arc per beam (APB) method and the beam determined arc(BDA) method, which is determined by the number of beams, were applied. For non-coplanar VMAT, the BDA method was utilized, and a total of 9 treatment plans were established by varying the arc counts. All radiation therapy plans met the radiation oncology group (RTOG) 0933 protocol standards, and 14 dosimetric factors were compared and analyzed. The results showed that the BDA-NC VMAT method demonstrated superior performance in terms of planning target volume (PTV) coverage and protection of normal organs, while APB-VMAT was advantageous in terms of hippocampal protection, monitor unit and delivery time. This study is expected to contribute to the efficient establishment of HA-WBRT plans considering the changes in beam arrangement and rotation arc numbers in Monaco RTPs.

• 동아시아식생활학회지
• /
• 제16권6호
• /
• pp.663-669
• /
• 2006

The dietary effects of soy fiber beni-koji(SBCA) containing chitosan-ascorbate on the body weight and serum lipids in obese rats induced by a high fat diet were investigated. The experimental plots(6 rats per each group) were divided into a normal group(NC), a high fat diet group(HF), a 1% SBCA diet group(SBCA1) and a 2% SBCA diet group(SBCA2), and fed for 6 weeks. Compared with the HF group, the mean body weight and the $R\'{o}hrer$ index of the SBCA1 and SBCA2 groups decreased by $3.4{\sim}7.4%$ and $8.1{\sim}13.9%$, respectively. In particular, the body lipids in the SBCA2 group decreased by 42.3%. The serum triglyceride content decreased by approximately $25.54{\sim}27.34%$ in the experimental diet groups. There was no significant difference in the serum total lipids between the HF and SBCA1 groups. On the other hand, the total lipids in SBCA2 group decreased by 19.12% compared with the HF group. In the SBCA2 group, the total serum cholesterol and LDL-cholesterol content decreased by 6.57% and 41.20% compared with the HF group, respectively, while the HDL-cholesterol increased by 10.0%. The risk factor index(RFI) in the SBCA2 group was decreased remarkably by 58.57%.