• 한국경영과학회:학술대회논문집
• /
• 대한산업공학회/한국경영과학회 1991년도 춘계공동학술대회 발표논문 및 초록집; 전북대학교, 전주; 26-27 Apr. 1991
• /
• pp.131-131
• /
• 1991

• Asian-Australasian Journal of Animal Sciences
• /
• 제27권8호
• /
• pp.1131-1140
• /
• 2014

This research focused on the effects of different doses of Bacillus subtilis KN-42 on the growth performance, diarrhea incidence, faecal bacterial flora, and the relative number of Lactobacillus and Escherichia coli in faeces of weaned piglets to determine whether the strain can serve as a candidate antimicrobial growth promoter. A total of 360 piglets (initial body weight $7.14{\pm}0.63$ kg) weaned at $26{\pm}2$ days of age were randomly allotted to 5 treatment groups (4 pens per treatment with 18 pigs per pen) for a 28-day trial. Dietary treatments were basal diet without any antimicrobial (negative control; NC), basal diet supplemented with 120 mg/kg feed of neomycin sulfate (positive control; PC) and basal diet supplemented with $2{\times}10^9$ (L), $4{\times}10^9$ (M) and $20{\times}10^9$ (H) CFU/kg feed of B. subtilis KN-42. During the overall period, average daily gain and feed efficiency of piglets were higher in groups PC, M, and H than those in group NC (p<0.05), and all probiotics and antibiotics groups had a lower diarrhea index than group NC (p<0.05). The 16S rDNA gene-based methods were used to analyze faecal bacterial flora on day 28 of experiment. The result of denaturing gradient gel electrophoresis analysis showed that supplementation of B. subtilis KN-42 to the diet changed the bacterial communities, with a higher bacterial diversity and band number in group M than in the other four groups. Real-time polymerase chain reaction analysis showed that the relative number of Lactobacillus were higher in groups PC and H than in group NC (p<0.05), and the supplemented B. subtilis KN-42 to the diet also reduced the relative number of E. coli (p<0.05). These results suggest that dietary addition of B. subtilis KN-42 can improve the growth performance and gastrointestinal health of piglets.

• Asian-Australasian Journal of Animal Sciences
• /
• 제30권10호
• /
• pp.1442-1449
• /
• 2017

Objective: This study investigated the effect of microbial phytase supplementation on growth performance, tibia ash, plasma parameters, apparent ileal digestibility (AID) of amino acid (AA) and apparent digestibility of nutrients in Youxian Sheldrakes fed with low-phosphorus (P) cornsoybean diets. Methods: A total of 350 Youxian Sheldrakes (7d old) were randomly divided into 5 treatment groups: positive control (PC) group has adequate available P diet (0.42% and 0.38%, starter and grower), negative control (NC) group were deficient in available P (0.32% and 0.28%, starter and grower) and NC diet was supplemented with 3 levels of microbial phytase (500, 750, and 1,000 U/kg). Results: Dietary supplementation of phytase in NC diet improved the average daily gain, increased the levels of serum calcium (Ca), tibia Ca and P, AID of AA and apparent digestibility of energy and Ca in starter stage (p<0.05). There was an increased (p<0.001) in the utilization of P from 17.3% to 23.9%. Phytase supplementation (1,000 U/kg) has shown that the AID of His, Thr, Val, indispensable AA, Glu, Pro, and dispensable AA was higher (p<0.05) than that of NC. Moreover, phytase supplementation improved (p<0.05) serum and tibia Ca and P, AID of AA and apparent digestibility of dry matter, crude protein, energy, P and Ca, and reduced (p<0.05) feed to gain ratio (F/G) and the levels of serum alkaline phosphatase in grower stage. Likewise, an increase (p<0.001) in the utilization of P was noticed from 12.6% to 17.2%. Supplement phytase at 750 U/kg improved the AID of His, Thr, Asp, Cys, Pro, and Ser (p<0.05). Conclusion: The microbial phytase supplement could improve growth performance, AID of some AA and apparent utilization of other nutrients in Youxian Sheldrakes, and reduce excreta P load to environment.

• 수산해양기술연구
• /
• 제48권4호
• /
• pp.415-427
• /
• 2012

Seasonal variation in species composition and abundance of fish assemblage in the north coast (NC: Ayajin) and central coast (CC: Hupo) of the East Sea were calculated using samples collected by trammel net during 2011-2012. A total of 20 species from NC and 17 species from CC were collected. Of the fishes collected, the dominant fish species were Glyptocephalus stelleri and Careproctus rastrinus in the NC, and Dasycottus setiger and G. stelleri in the CC. These 2 fishes accounted for 71.7% and 81.0% of the total number of individuals collected in the NC and CC, respectively. The number of fish species, number of individuals, biomass and species diversity indices fluctuated with the seasons. The cluster analysis and non-metric multidimensional scaling (MDS) based on Bray-Curtis similarity revealed that the fish assemblages classified into north and central groups. Analysis of similarity percentages of species contributions (SIMPER) indicated that most individual of G. stelleri and Gadus macrocephalus contributed to north group, and D. setiger and G. stelleri in central group, whereas 15 species contributed to 90% of the dissimilarity.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제9권2호
• /
• pp.545-563
• /
• 2015

Energy harvesting (EH) and network coding (NC) have emerged as two promising technologies for future wireless networks. In this paper, we combine them together in a single system and then present a time switching-based network coding relaying (TSNCR) protocol for the two-way relay system, where an energy constrained relay harvests energy from the transmitted radio frequency (RF) signals from two sources, and then helps the two-way relay information exchange between the two sources with the consumption of the harvested energy. To evaluate the system performance, we derive an explicit expression of the outage probability for the proposed TSNCR protocol. In order to explore the system performance limit, we formulate an optimization problem to minimize the system outage probability. Since the problem is non-convex and cannot be directly solved, we design a genetic algorithm (GA)-based optimization algorithm for it. Numerical results validate our theoretical analysis and show that in such an EH two-way relay system, if NC is applied, the system outage probability can be greatly decreased. Moreover, it is shown that the relay position greatly affects the system performance of TSNCR, where relatively worse outage performance is achieved when the relay is placed in the middle of the two sources. This is the first time to observe such a phenomena in EH two-way relay systems.

• 한국생산제조학회지
• /
• 제6권2호
• /
• pp.83-91
• /
• 1997

Interactive measuring Part Program Generating Tools (IMPPGT) realized on the FANUC 15MA using touch trigger probes and interactive macro functions of the CNC were developed for intelligent measuring and inspection systems on the machine tools. Machine tools. Menu driven measuring and inspection functions of the IMPPGT were studied and implemented on the CNC through the macro executor and ROM writer. In order to automate measurement and inspection procedures in machine shops, measuring G Code system was also proposed. Using the developed measuring G Code system on the machine tool, untended measurement and inspection operation was able to be realized in FMS lines.

• 한국경영과학회:학술대회논문집
• /
• 대한산업공학회/한국경영과학회 1992년도 춘계공동학술대회 발표논문 및 초록집; 울산대학교, 울산; 01월 02일 May 1992
• /
• pp.299-308
• /
• 1992

Determining tool-approach directions is an important issue when an effort is made to transfer CAD data into manufacturing automatically. An algorithm is developed to determine whether a given part can be machined on a three-axis milling machine. lf a set of feasible tool-approach directions exists for a sculptured surface, the NC tool path and G-codes for machining the surface on a three-axis milling machine can be generated automatically by an NC tool path generation algorithm. The algorithm can be used for orientation and fixturing of the workpiece for interference free machining. The algorithm can also be applied to checking the translational separability of polyhedral parts in automatic assembly.

• 한국CDE학회논문집
• /
• 제4권1호
• /
• pp.52-59
• /
• 1999

The CAD/CAM System for deep drawing transfer die tin mechanical press process has been developed. The developed CAD system can generate the drawing of transfer die in mechanical press. Using thee results from CAD system, it can generate the NC data to machine die's elements on the CAD system. This system can reduce design man-hour an human errors. In order to construct the system, it is used to automated the design process and generate the NC data using concepts of the designing rule and the machining rule. The developed system is based on the knowledge base system which is involved a lot of expert's technology in the practice field. Using AutoLISP language under the AutoCAD system, CTK customer language of SmartCAM is used as the overall CAD/CAM environment. Results of this system will be provide effective aids to the designer and manufacturer in this field.

• 한국정밀공학회지
• /
• 제19권4호
• /
• pp.79-86
• /
• 2002

As consumer electronics, information, and aero-space industry grow, the demand for aspheric lens increases higher. To enhance the precision and productivity of aspheric surface, a CAM system for ultra-precision aspheric surface needs to be realized. In this study, the developed CAM system can generate NC code fur various aspheric surfaces fast and precisely by a new bi-arc interpolation method that the location of maximum error is fixed at an efficient point. The newly developed bi-arc meets the given tolerance more precisely, performs faster calculation. The cutting condition input module and the NC code verification module are adequate to ultra-precision machining, so that a operator can obtain products fast and easily.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1998년도 금형가공 심포지엄
• /
• pp.1-7
• /
• 1998

본 연구에서는 3차원 솔리드 모델러로부터 Modeling한 후 제작된 model 에 사용자가 원하는 측정 위치를 지정함으로써 자동적으로 측정용 NC Data를 얻을 수 있는 알고리즘을 설계하고 이를 Program화하였다. 3-D Modeler로서 Unigraphics를 사용하였으며, 공작기계는 FANUC Controller를 장착한 Machining Center이다. 측정용 센서는 접촉식 Probe를 사용하였다. 본 연구를 통하여 CAD시스템에서 구축된 Geomaatric Model로부터 직접 측정을 위한 NC data를 얻고 이 data를 가공후의 측정 Data와 비교하여 봄으로써 제품의 가공정밀도를 확인해 볼 수 있으며, 가공시의 간섭 check, 잔삭가공여유, 과절삭등 다양한 정보를 얻을 수 있을 것이다. 향수 지속적인 연구개발을 통하여 data의 통계처리 및 공작기계의 오차 보정등을 고려하여 줌으로써 기계상에서의 측정 data에 대한 신뢰도를 구축할 수 있을 것으로 사료된다.