• 한국CDE학회논문집
• /
• 제8권4호
• /
• pp.254-261
• /
• 2003

In mold and die shops, NC machining process mainly affects the quality of the machined surface and the manufacturing time of molds and dies. The estimation of NC machining time is a prerequisite to measure the machining productivity and to generate a process schedule, which generally includes the process sequence and the completion time of each process. It is required to take into account dynamic characteristics in the estimation, such as the ac/deceleration of NC machine controllers. Intensive observations at start and end points of NC blocks show that a minimum feedrate, a key variable in a machining time model, has a close relation to a block distance, an angle between blocks, and a command feedrate. Thus, this study addresses regression models for the minimum feedrate estimation on short and long NC blocks considering these parameters. Furthermore, machining time estimation models by the four types of feedrate behaviors are suggested based on the estimated minimum feedrate. To show the validity of the proposed machining time model, the study compares the estimated with the actual machining time in the sculptured surface machining of several mold dies.

• 대한기계학회논문집A
• /
• 제35권9호
• /
• pp.1071-1076
• /
• 2011

본 연구에서는 산업용 다관절 로봇을 이용한 3 차원 곡면가공 방안에 대하여 연구하였다. 가반중량이 큰 산업용 로봇의 경우 반복위치정밀도가 높지 않아 위치오차와 가공 깊이 방향 오차를 발생시키며, 본 연구에서는 레이저 변위센서를 이용하여 이를 보정하는 방법을 제시하였다. 로봇교시포인터의 수를 줄이기 위하여 가공면의 특이점들만을 이용하여 곡면 가공이 가능하도록 로봇 궤적을 생성하는 방안을 연구하였다. 본 연구에서는 실제 산업용 로봇을 이용하여 가공시험을 수행하였다. 회전수, 가공각도, 가공깊이, 가공속도 등의 가공조건을 변경해가며, 표면조도, 실제 가공깊이, 진동 및 소음 발생에 대한 시험을 수행하여 적용 가능한 가공조건을 도출하였다.

• 정보화사회
• /
• 통권130호
• /
• pp.14-20
• /
• 1999

• 한국생산제조학회지
• /
• 제19권5호
• /
• pp.5-12
• /
• 2010

• 대한기계학회논문집A
• /
• 제29권5호
• /
• pp.770-776
• /
• 2005

The gains fur NC controller parameter are fixed when the controller is combined with a machine. However, the characteristics of controller could be changed as it has being used by the machine or other environmental conditions. Those result in that the tool positioning accuracy is influenced. The loading torque in servo motor influences on the tool positioning accuracy and it is controlled by the parameter gains. It is required to analyze the torque variation with angular positioning accuracy of the servo motor. This study focus on a measuring method and device for verifying angular positioning accuracy of NC servo motor. We used a high resolution An converter for acquiring analogue signal of rotary encoder in servo motor. The positional accuracy for a nominal tool path, which is generated by the combination of axial movements (X,Y,Z), is analyzed with the servo motor torque. The current variation signal is acquired at the power line using a hall sensor and converted to the loading torque of servo motor. The method of measurement and analysis proposed in this study will be used for determining the gains of parameter in NC controller. This gain tuning is also necessary when the controller is set up at a machine.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.956-961
• /
• 2004

This paper proposes a study on the spherical lens manufacturing by simultaneous 3 axis for NC lathe. We use friction drive system for moving system in experimental diamond turing machine. The diamond turning machine use manufacturing for high quality lens, mirror and many optics products. Especially, the high tech industry require a lot of lens. For example, optical engineering. medical science, space engineering and material engineering etc. The friction drive system is very simple and quiet, compared to ball screw system. We find a problem at the simultaneous 3 axis and suggest a solution. Also, when we manufactured a micro lens. find a problem and solution.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.551-554
• /
• 2002

The paper discusses new approach for machining operation simulation using enhanced Z map algorithm. To extract the required geometric information from NC code, suggested algorithm uses supersampling method to enhance the efficiency of a simulation process. By executing redundant Boolean operations in a grid cell and averaging down calculated data, presented algorithm can accurately represent material removal volume though tool swept volume is negligibly small. Supersampling method is the most common form of antialiasing and usually used with polygon mesh rendering in computer graphics. The key advantage of enhanced Z map model is that the data structure is same with conventional Z map model, though it can acquire higher accuracy and reliability with same or lower computation time. By simulating machining operation efficiently, this system can be used to improve the reliability and efficiency of NC machining process as well as the quality of the final product.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 추계학술대회 논문집
• /
• pp.1033-1038
• /
• 1995

NC 공작기계의 contour 운동 오차를 측정하기 위하여 사용되는 Ball-Bar에 의한 원호 보간 시험 데이터를 이용하여 NC controller의 성능을 평가 할 수 있는 S/W에 의한 방법을 제시한다. 본 논문에서 지금까지는 분석이 어려웠던 Masrer-Slave Changeover의 분석을 가능하게 하였으며, Ball-Bar로 부터 얻어지는 데이터를 Weighted Residual Method에 의한 종합적인 분석을 하였으며, 오차 원인별 비교를 위해 Eztra Sum of Squares Method를 도입하였다. 본 연구의 실제 적용을 위한 측정 및 분석 S/W를 개발하였으며, 결과적으로 NC controller의 성능평가에 유용함을 알 수 있었다. 무부하 조건에서의 Ball-Bar에 의한 분석 데이터와의 비교를 위하여 원형 시편을 가공하고, 진원도 측정 및 분석을 통하여 유사한 오차 pattern을 가짐을 알 수 있었다.

• 대한기계학회논문집A
• /
• 제26권9호
• /
• pp.1814-1821
• /
• 2002

NC cutting simulation is an important factor in the development of products. The geometric modelling of cutter swept surface should be done in NC cutting simulation. A part of cutter swept surface is a ruled surface blended with silhouette curve and cutter path. Finding an intersection point between cutter swept surface and a line is one of major problems in Z-map based cutting simulation. In this paper, cutter swept surface is defined parametrically and it's intersection point with Z-map is found in an exact form. Triangular grid Z-map based 3-axis NC cutting simulation is performed.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집A
• /
• pp.734-739
• /
• 2001

In this paper, we develop a six-axes machining center tool(MCT) and CAD/CAM system. The MCT consists of two mechanical parts, i.e., a X-Y-Z Cartesian coordinate typed MCT and a parallel-typed tilting table. Kinematics and singularity are accomplished to design the parallel-typed tilting table, and CAD/CAM system is developed for the six-axes MCT, which requires the commands of position as well as orientation for machining of complex shape. The CAD/CAM system has a tool path generator, a NC code generator and a graphic simulator. This paper designs the parallel-typed tilting table to meet the desired specification and presents the results of tool path, NC code and graphic simulation.