• International Journal of Industrial Entomology and Biomaterials
• /
• v.7 no.2
• /
• pp.221-229
• /
• 2003

Ten multivoltine female parental lines were crossed with popular bivoltine male silkworm breed NB$_4$D$_2$. Three types of heterosis parameters viz., heterosis over mid-parental value (hybrid vigour), heterobeltiosis (useful heterosis) and standard heterosis (standard check) were estimated for 15 economically important quantitative traits. The interaction among the hybrids and parents indicated significant effect for maximum characters. The heterotic effect of new hybrid combination was compared with popular hybrids viz., Pure Mysore${\times}$NB$_4$D$_2$ and Nistari${\times}$NB$_4$D$_2$. Varied heterotic effect was observed for different traits for different hybrid combination. The results inferred that the crosses viz., BL$_{23}$${\times}$NB$_4$D$_2$ ranked top for 14 traits followed by Hosa Mysore${\times}$NB$_4$D$_2$ for 11 traits; PA$_{12}$${\times}$NB$_4$D$_2$ for 9 traits; BL$_{24}$${\times}$NB$_4$D$_2$ for 8 traits; Kolar Gold${\times}$NB$_4$D$_2$ for 7 traits; WAI$_1$${\times}$NB$_4$D$_2$ for 6 traits and MU$_{11}$${\times}$NB$_4$D$_2$ for 5 traits. Among these, the best hybrids Kolar Gold${\times}$NB$_4$D$_2$ and MU$_{11}$${\times}$NB$_4$D$_2$ were identified for longer filament length and fine denier. Similarly for higher cocoon yield and silk productivity BL$_{223}$${\times}$NB$_4$D$_2$ and BL$_{24}$${\times}$NB$_4$D$_2$ were found to be superior. These hybrid combinations are suitable for commercial exploitation at large scale.e.e.e.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.11a
• /
• pp.284-284
• /
• 2007

In this study, the microwave dielectric property variations of (1-x)$BiNbO_4-(x)ZnNb_2O_6$ composites (x=0.3, 0.5 and 0.7) with 10wt% zinc borosilicate(ZBS) glass was investigated as a function of the substitution of $ZnNb_2O_6$ with a view to applying thes system to LTCC technology. The all composition addition of 10wt% ZBS glass ensured a successful sintering below $900^{\circ}C$. In addition, a small amount of $Bi_2SiO_5$ as the secondary phase was observed in the all composition. The substitution of $ZnNb_2O_6$ on the $BiNbO_4$ composites increased the $Q{\times}f$ values, but it decreased the sinterability and dielectric constant due to the high sintering temperature and low dielectric constant of $ZnNb_2O_6\;than\;BiNbO_4$ ceramics. The increasing of $ZnNb_2O_6$ content from 0.3 to 0.7 in the (1-x)$BiNbO_4-(x)ZnNb_2O_6$ composites with 10wt% ZBS glass sintered at $900^{\circ}C$ demonstrated 28.1~15.6 in the dielectric constant$({\varepsilon}_r)$, 5,500~8,700GHz in the $Q{\times}f$ value.

• Journal of the Mineralogical Society of Korea
• /
• v.15 no.1
• /
• pp.59-68
• /
• 2002

Chemical analyses and Rietveld structural refinement with powder X-ray diffraction data were done for Nb-rich perovskite, named latrappite ($Ca_2NbFe^{3+}O_6$)from the Oka, Quebec, Canada. Latrappite is shown to be a member of a continuous solid solution of $CaTiO_3-NaNbO_3-Ca_2NbFe^{3+}O_6$ and approximately $(Ca_{1.5}Na_{0.4})\;(Nb_{0.1}Ti_{0.6}Fe_{0.4})O_6$ in composition. The crystal structure of latrappite, determined by Rietveld refinement, is similar to that of perovskite ($CaTiO_3$). It differs in that replacement of Ti by Nb and $Fe^{3+}$ results in greater distortion and tilting of the $TiO_6$ framework octahedra relative to $CaTiO_3$. Revised unit-cell parameters of latrappite are a=5.4474(4), b=5.5264(4), c=7.7519(5) ${\AA},\;V=233.4(3){\AA}^3$ space group Pbnm.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.260-260
• /
• 2007

Low-temperature sintering and dielectric properties of the $1-xBiNbO_4-xZnNb_2O_6$ ceramics (x=0.3, 0.5, and 0.7) with 10 wt% zinc borosilicate (ZBS) glass was investigated as a function of the substitution of $ZnNb_2O_6$ with a view to applying this system to LTCC technology. The all composition addition of 10 wt% ZBS glass ensured a successful sintering below $900^{\circ}C$. The the amount of $ZnNb_2O_6$ on $ZnNb_2O_6$ ceramics increased the $Q{\times}f$ values, but it decreased the sinterability and dielectric constant due to the higher $Q{\times}f$ value and sintering temperature of $ZnNb_2O_6$ than that of $ZnNb_2O_6$ ceramics. The increase of $ZnNb_2O_6$ content from 0.3 to 0.7 in the $1-xBiNbO_4-xZnNb_2O_6$ ceramics with 10 wt% ZBS glass sintered at $900^{\circ}C$ demonstrated 30~20 in the dielectric constant (${\varepsilon}_r$), 3,500~4,500 GHz in the $Q{\times}f$ value.

• Transactions on Electrical and Electronic Materials
• /
• v.8 no.5
• /
• pp.201-205
• /
• 2007

Low temperature sintering behavior and microwave dielectric properties of the $BiNbO_{4^-}$ and the $ZnNb_2O_{6^-}zinc$ borosilicate glass(ZBS) systems were investigated with a view to applying the composition to LTCC technology. The addition of $10{\sim}30$ wt% ZBS in both systems ensured successful sintering below $900^{\circ}C$. For the $BiNbO_{4^-}ZBS$ system, the sintering was completed when 15 wt% ZBS was added whereas 25 wt% ZBS was necessary for the $ZnNb_2O_{6^-}zinc$ system. Secondary phase was not observed in the $BiNbO_{4^-}ZBS$ system but a small amount of $ZnNb_2O_6$ with the willemite structure as the secondary phase was observed in the $ZnNb_2O_{6^-}ZBS$ system. In terms of dielectric properties, the application of the $BiNbO_{4^-}$ and the $ZnNb_2O_{6^-}ZBS$ systems sintered at $900^{\circ}C$ to LTCC were shown to be appropriate; $BiNbO_{4^-}15$ wt% ZBS($\varepsilon_r=25,\;Q{\times}f\;value=3,700GHz,\;\tau_f=-32ppm/^{\circ}C$) and $ZnNb_2O_{6^-}25$ wt% ZBS($\varepsilon_r=15.8,\;Q{\times}f\;value=5,400GHz,\;\tau_f=-98ppm/^{\circ}C$).

• Journal of the Korean Ceramic Society
• /
• v.39 no.12
• /
• pp.1190-1196
• /
• 2002

Microwave dielectric properties and multilayer characteristics $(1-x)BiNbO_4-xCaNb_2O_6$ (0${\le}$x${\le}$1.0) ceramics were investigated as a function of $CaNb_2O_6$ content. In the composition range of 0.25${\le}$x${\le}$0.75, the mixture phases of $BiNbO_4$ with stibotantalate structure and $CaNb_2O_6$ with columbite structure were detected and secondary phase or phase transition were not detected. Dielectric constant (K) of $(1-x)BiNbO_4-xCaNb_2O_6$ ceramics was largely dependent on the existing phase and could be estimated by the dielectric mixing rule calculated from maxwell equation. Typically, dielectric constant (K) of 26, quality factor (Qf) of 4300 GHz and Temperature Coefficient of resonant Frequency (TCF) of -18 ppm/${\circ}C$ were obtained for $0.5BiNbO_4-0.5CaNb_2O_6$ specimens with 0.8 wt% $CuV_2O_6$ sintered at 1000${\circ}C$ for 3h. The deviation of X-Y shrinkage and camber value of the multilayers obtained from $0.5BiNbO_4-0.5CaNb_2O_6$ green sheet sintered at 850∼950${\circ}C$ for 20 min. were smaller than those of $BiNbO_4$ multilayers.

• Korean Journal of Materials Research
• /
• v.17 no.8
• /
• pp.442-446
• /
• 2007

Microwave dielectric properties of $0.85CaWO_4-0.15LnNbO_4$ (Ln = La, Sm) ceramics were investigated as a function of the sintering temperature and $Li_2WO_4$ content from 0.8 wt.% to 1.5 wt.%. A single phase with tetragonal scheelite structure was obtained at a given composition ranges. For the specimens with $Li_2WO_4$, the sintering temperature could be effectively reduced from $1150^{\circ}C$ to $900^{\circ}C$ due to the enhancement of sinterability. Dielectric constant (K) of the specimens with $LaNbO_4$ and $SmNbO_4$ was increased with the increase of sintering temperature and/or $Li_2WO_4$ content. However, K of the specimens with $LaNbO_4$ was higher than that of $SmNbO_4$ due to the larger dielectric polarizability $(\alpha)$ of $LaNbO_4$ ($18.08{\AA}$) than that of $SmNbO_4$ ($16.75{\AA}$). With an increase of $Li_2WO_4$ content, Qf value of the specimens with $SmNbO_4$ was decreased, while that of the specimens with $LaNbO_4$ was increased. Temperature coefficient of resonant frequency (TCF) was increased with the increase of $Li_2WO_4$ content.

• Journal of the Microelectronics and Packaging Society
• /
• v.30 no.4
• /
• pp.79-85
• /
• 2023

A novel low-temperature co-fired ceramic (LTCC) dielectric, composed of (1-4x)Bi_1.5Zn_1.0Nb_1.5O₇-3xBi₂Zn_2/3Nb_4/3O₇-2xLiZnNbO₄ (x=0.03-0.21), was synthesized through reactive liquid phase sintering of Bi_1.5Zn_1.0Nb_1.5O₇-xLi₂CO₃ ceramic at temperatures ranging from 850℃ to 920℃ for 4 hours. During sintering, Li₂CO₃ reacted with Bi_1.5Zn_1.0Nb_1.5O₇, resulting in the formation of Bi₂Zn_2/3Nb_4/3O₇, and LiZnNbO₄. The resulting sintered body exhibited a relative sintering density exceeding 96% of the theoretical density. By altering the initial Li₂CO₃ content (x) and consequently modulating the volume fraction of Bi_1.5Zn_1.0Nb_1.5O₇, Bi₂Zn_2/3Nb_4/3O₇, and LiZnNbO₄ in the final sintered body, a sample with high dielectric constant (ε_r), low dielectric loss (tan δ), and the temperature coefficient of dielectric constant (TCε) characterized by NP0 specification (TCε ≤ ±30 ppm/℃) was achieved. As the Li₂CO₃ content increased from x=0.03 mol to x=0.15 mol, the volume fraction of Bi₂Zn_2/3Nb_4/3O₇ and LiZnNbO₄ in the composite increased, while the volume fraction of Bi_1.5Zn_1.0Nb_1.5O₇ decreased. Consequently, the dielectric constant (εr) of the composite materials varied from 148.38 to 126.99, the dielectric loss (tan δ) shifted from 5.29×10^-4 to 3.31×10^-4, and the temperature coefficient of dielectric constant (TCε) transitioned from -340.35 ppm/℃ to 299.67 ppm/℃. A dielectric exhibiting NP0 characteristics was achieved at x=0.09 for Li₂CO₃, with a dielectric constant (ε_r) of 143.06, a dielectric loss (tan δ) value of 4.31×10^-4, and a temperature coefficient of dielectric constant (TCε) value of -9.98 ppm/℃. Chemical compatibility experiment with Ag electrode revealed that the developed composite material exhibited no reactivity with the Ag electrode during the co-firing process.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1998.05b
• /
• pp.237-242
• /
• 1998

Zr합금의 수소화 반응속도에 미치는 합금원소의 영향을 평가하기 위하여 Zr과 Zr-0.8Sn-XNb계열(X=0.2, 0.4, 0.8, 1.0) 및 Zr-0.4Nb-YSn계열(Y=0.5, 0.8, 1.5, 2.0)의 3원계 합금으로 electro-microbalance가 장착된 TGA (thermo-gravimetric apparatus)장치를 이용하여 40$0^{\circ}C$에서 1기압 수소와의 반응에 따른 무게증가를 in-situ로 측정하였다 Sn 첨가량이 증가함에 따라 1.5% 까지는 수소반응에 따른 무게증가율이 낮게 나타났으나 Sn을 2.0% 함유한 Zr-0.4Nb-2.0Sn합금의 경우 가장 높게 나타났다. 이는 Sn의 함량이 증가할수록 수소침투에 대한 저항성이 증가함을 의미하지만 Sn이 고용도 이상 함유되면 Sn을 함유한 다량의 석출물이 대량수소침투의 site로 작용하여 수소침투가 가속화된 것으로 평가된다. Nb의 경우 첨가량을 증가시킬수록 무게증가는 크게 나타났는데 이는 Nb이 수소흡수성이 크기 때문이며 Zr-0.8Sn-0.2Nb 및 Zr-0.8Sn-0.4Nb 합금보다 Zr-0.8Sn-0.8Nb 및 Zr-0.8Sn-1.0Nb 합금의 경우 TEM을 이용한 금속간 석출물(intermetallic precipitates) 분석에서 이러한 석출물들의 평균크기 및 개수가 크게 평가되었고, 또한 Zr-0.8Sn-0.2Nb, Zr-0.8Sn-0.4Nb 합금에서는 관찰이 되지 않는 $\beta$-Zr 석출물이 관찰되었다 이러한 사실로부터 Nb의 큰 수소흡수성에 부가적으로 이러한 석출물들이 수소침투를 가속화 하는 데에 기여하는 것으로 여겨진다.

• Journal of the Korean institute of surface engineering
• /
• v.33 no.4
• /
• pp.251-260
• /
• 2000

Ta and Hf added Ti-l5Sn-4Nb alloys without V and Al elements for biomaterial were melted by arc furnace in response to recent concerns about the long term safety of Ti-6Al-4V alloy. All specimens were homogenized at $1000^{\circ}C$ and solution treatment was performed at $812^{\circ}C$ and aging treatment at $500^{\circ}C$. The microstructure and mechanical properties were analysed by optical micrograph, hardness tester and instron. Ti-l5Sn-4Nb system alloys showed widmanstatten microstructure which is typical microstructure in $\alpha$＋$\beta$ type Ti alloys. The Ti-l5Sn-4Nb-2Hf and Ti-l5Sn-4Nb-2Ta alloys showed better hardness and tensile strength compared with Ti-6Al-4V. The result of XPS analysis, Ti-l5Sn-4Nb alloy in air atmosphere consisted of $TiO_2$, SnO and NbO.