• Korean Journal of Materials Research
• /
• v.8 no.11
• /
• pp.1020-1025
• /
• 1998

Irradiation-induced changes in mechanical properties and magnetic parameters were measured and compared to explore possible correlations for Mn-Mo-Ni low alloy steel surveillance specimens which were irradiated to a neutron fluence of $2.3\times10^{19}n/cm^2$(E>1.0MeV) in a typical pressurized water reactor environment at about $288^{\circ}C$. For mechanical property parameters, microvickers hardness, tensile and Charpy impact test were performed and Barkhausen noise amplitude, coercivity, remanence, maximum induction were measured for magnetic parameters. respectively. Results of mechanical property measurements showed an increase in yield and tensile strength, microvickers hardness. 41J indexed $RT_{NDT}$ and a decrease in upper shelf energy irrespective of base and weld metals. However, in the case of tensile properties, the changes in weld metal were negligible compared to the base metal. In the case of magnetic measurements, it is found that magnetic remanence, BN amplitude. BN energy have dropped significantly but coercivity(H,) has increased rapidly after irradiation. In this study. the measurements conducted on surveillance specimens of Mn-Mo-Ni low alloy steel showed that there were strong correlations between mechanical properties and magnetic properties.

• Korean Journal of Materials Research
• /
• v.8 no.11
• /
• pp.1055-1060
• /
• 1998

Thermoelectric properties of ($Pb_{1-x}Sn_x$)Te ($0\leq{x}\leq{0.4}$) alloys, fabricated by mechanical alloying and hot pressing, were investigated with variation of the SnTe content. For the hot-pressed PbTe and ($Pb_{0.9}Sn_{0.1}$)Te. transition from p-type to n-type occurred at $200^{\circ}C$ and $300^{\circ}C$, respectively. However, the specimens containing SnTe more than 0.2mole exhibited p-type conduction up to 450'C. In extrinsic conduction region, the Seebeck coefficient and electrical resistivity of the hot-pressed ($Pb_{1-x}Sn_x$)Te decreased with increasing the SnTe content. The temperature at which the hot-pressed (Pbl-,Sn,)Te exhibited a maximum figure-of-merit was shifted to higher temperature with increasing the SnTe content The hot-pressed (Pbo ,Sno dTe exhibited a maximum figure-of-merit of $0.68\times10_{-3}/K$ at $200^{\circ}C$.

• Journal of Korean Society of Environmental Engineers
• /
• v.38 no.4
• /
• pp.162-168
• /
• 2016

The aim was to investigate the effect of reducing the odorous and complex odor released during the decomposition of food wastes using effective microorganism (EM) as a function of time at $20^{\circ}C$ and $35^{\circ}C$. The variation of total microbial counts and dominant species counts in EM and leachate produced during food wastes decomposition was also observed. In general, the cumulative concentration of sulfur compounds ($H_2S$, $CH_3SH$) and complex odor released during food wastes decomposition increased with increasing elapsed time. The nitrogen compounds ($NH_3$, trimethyl amine), however, was not observed in all samples. The addition of EM in food wastes resulted in the reduction of concentration of sulfur compounds and complex odor, in spite of the increase of $CH_3CHO$ concentration. The dominant microbial species detected in EM were Lactobacillus species(Lactobacillus rhamnosus and Lactobacillus casei). In the leachate produced during food wastes decomposition, however, the various microbial community alternative to that detected in EM was observed. The EM could be potentially useful as a tools for reducing odor induced from the food waste decomposition process.

• Journal of Internet Computing and Services
• /
• v.17 no.2
• /
• pp.29-37
• /
• 2016

Humans develop and maintain relationship through communication. Communication is largely divided into verbal communication and non-verbal communication. Verbal communication involves the use of a language or characters, while non-verbal communication utilizes body language. We use gestures with language together in conversations of everyday life. Gestures belong to non-verbal communication, and can be offered using a variety of shapes and movements to deliver an opinion. For this reason, gestures are spotlighted as a means of implementing an NUI/NUX in the fields of HCI and HRI. In this paper, using Kinect and the geometric features of the hand, we propose a method for recognizing the number of fingers and detecting the hand area. A Kinect depth image can be used to detect the hand region, with the finger number identified by comparing the distance of outline and the central point of a hand. Average recognition rate for recognizing the number of fingers is 98.5%, from the proposed method, The proposed method would help enhancing the functionality of the human computer interaction by increasing the expression range of gestures.

• Korean Journal of Soil Science and Fertilizer
• /
• v.42 no.2
• /
• pp.98-102
• /
• 2009

Various physical properties of soils were investigated in the areas where organic farming had been practiced widely, for upland fields. The investigations were also conducted in the nearby fields under conventional to find out the influence of organic farming on the physical properties of soils. The investigated properties involved bulk density, hardness, shearing resistance, friction resistance, sinking depth of small rectangular board, water stable aggregates and the depth of soil available to plants. By and large, the practice of organic farming tended to improve all of the physical properties soils, investigated in upland soils. However, in case of water stable soil aggregates in upland soils, the reverse was previous data; in those soils water stable soil aggregates were less under organic farming. It was suspected that this might be due to intensive application of the organic materials with high C/N ratio like wood chips and wood bark. The contents of OM, Av. P2O5, and Ex. cations were higher in organic farming than those of nearby fields under conventional, due to heavy organic matter application. From the results, It could be concluded that soils under organic farming were looser and softer than those under conventional as shown by lower bulk density and hardness, but that the effect of organic farming on water stable aggregates were low.

• Toxicological Research
• /
• v.29 no.1
• /
• pp.21-25
• /
• 2013

The selective targeting of an integrin ${\alpha}_v{\beta}_3$ receptor using radioligands may enable the assessment of angiogenesis and integrin ${\alpha}_v{\beta}_3$ receptor status in tumors. The aim of this research was to label a peptidomimetic integrin ${\alpha}_v{\beta}_3$ antagonist (PIA) with $^{99m}Tc(CO)_3$ and to test its receptor targeting properties in nude mice bearing receptor-positive tumors. PIA was reacted with tris-succinimidyl aminotriacetate (TSAT) (20 mM) as a PIA per TSAT. The product, PIA-aminodiacetic acid (ADA), was radiolabeled with $[^{99m}Tc(CO)_3(H_2O)_3]^{+1}$, and purified sequentially on a Sep-Pak C-18 cartridge followed by a Sep-Pak QMA anion exchange cartridge. Using gradient C-18 reverse-phase HPLC, the radiochemical purity of $^{99m}Tc(CO)_3$-ADA-PIA (retention time, 10.5 min) was confirmed to be > 95%. Biodistribution analysis was performed in nude mice (n = 5 per time point) bearing receptor-positive M21 human melanoma xenografts. The mice were administered $^{99m}Tc(CO)_3$-ADA-PIA intravenously. The animals were euthanized at 0.33, 1, and 2 hr after injection for the biodistribution study. A separate group of mice were also co-injected with 200 ${\mu}g$ of PIA and euthanized at 1 hr to quantify tumor uptake. $^{99m}Tc(CO)_3$-ADA-PIA was stable in phosphate buffer for 21 hr, but at 3 and 6 hr, 7.9 and 11.5% of the radioactivity was lost as histidine, respectively. In tumor bearing mice, $^{99m}Tc(CO)_3$-ADA-PIA accumulated rapidly in a receptor-positive tumor with a peak uptake at 20 min, and rapid clearance from blood occurring primarily through the hepatobiliary system. At 20 min, the tumor-to-blood ratio was 1.8. At 1 hr, the tumor uptake was 0.47% injected dose (ID)/g, but decreased to 0.12% ID/g when co-injected with an excess amount of PIA, indicating that accumulation was receptor mediated. These results demonstrate successful $^{99m}TC$ labeling of a peptidomimetic integrin antagonist that accumulated in a tumor via receptor-specific binding. However, tumor uptake was very low because of low blood concentrations that likely resulted from rapid uptake of the agent into the hepatobiliary system. This study suggests that for $^{99m}Tc(CO)_3$-ADA-PIA to be useful as a tumor detection agent, it will be necessary to improve receptor binding affinity and increase the hydrophilicity of the product to minimize rapid hepatobiliary uptake.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.433-433
• /
• 2012

As the requirement in patterning geometry continuously shrinks down, the termination of etch process at the exact time became crucial for the success in nano patterning technology. By virtue of real-time optical emission spectroscopy (OES), etch end point detection (EPD) technique continuously develops; however, it also faced with difficulty in low open ratio etching, typically in self aligned contact (SAC) and one cylinder contact (OCS), because of very small amount of optical emission from by-product gas species in the bulk plasma glow discharge. In developing etching process, one may observe that coupon test is being performed. It consumes costs and time for preparing the patterned sample wafers every test in priority, so the coupon wafer test instead of the whole patterned wafer is beneficial for testing and developing etch process condition. We also can observe that etch open area is varied with the number of coupons on a dummy wafer. However, this can be a misleading in OES study. If the coupon wafer test are monitored using OES, we can conjecture the endpoint by experienced method, but considering by data, the materials for residual area by being etched open area are needed to consider. In this research, we compare and analysis the OES data for coupon wafer test results for monitoring about the conditions that the areas except the patterns on the coupon wafers for real-time process monitoring. In this research, we compared two cases, first one is etching the coupon wafers attached on the carrier wafer that is covered by the photoresist, and other case is etching the coupon wafers on the chuck. For comparing the emission intensity, we chose the four chemical species (SiF2, N2, CO, CN), and for comparing the etched profile, measured by scanning electron microscope (SEM). In addition, we adopted the Dynamic Time Warping (DTW) algorithm for analyzing the chose OES data patterns, and analysis the covariance and coefficient for statistical method. After the result, coupon wafers are over-etched for without carrier wafer groups, while with carrier wafer groups are under-etched. And the CN emission intensity has significant difference compare with OES raw data. Based on these results, it necessary to reasonable analysis of the OES data to adopt the pre-data processing and algorithms, and the result will influence the reliability for relation of coupon wafer test and whole wafer test.

• Journal of Biosystems Engineering
• /
• v.1 no.1
• /
• pp.55-55
• /
• 1976

An experimental work was conducted to develop an optimum operating system of various hay drying systems ; sun-drying with long hay, sun-drying after chopping, sun-drying after crushing, heated air drying after chopping using batch-type dryer and heated air drying after crushing using tunnel-type dryer. Seombody having 60 cm long and initial moisture content of approximately 79 % in wet basis was used for the experiment. The criteria selected for determining the optimum operating condition were the drying performance rate, the production cost and quality of dried matter of each drying systems. The result of this study are summarized as follows : 1. Drying characteristics of leaves of long stem hay, chopped seombody and crushed one were obtained by maintaining the oven temperature at 70 degrees centigrade. The required drying times for various samples to approximately 15% moisture content in wet basis were about 50 min .for leaves ; 160 min. for crushed hay ; 250 min. for chopped hay ; 340min. for ling hay and more than 360 min .for stems. The drying time of crushed hay was required about 50 % of that for the uncrushed long hay. Such a significant difference of drying of time between the leaf and long stem may indicate that an effective drying of seombody may not be achieved unless any kind of special process treatment for the whole hay is undertaken. 2. In each individual drying system, the following conclusions were drawn: a. After 8 days sun-drying on concrete floor under good days with average tempe?rature at $256{\circ}C$ and relative humidity at 55% at 2 P.M., the moisture content of long hay was still above 25 5'~ and the leaf loss during drying caused by wind and rough handling was more than 50 ~G. b. It was possible to dry the chopped seombody by sun-drying down to about 10 % moisture content within 5 days, however, a stock of heat and discolouration phenomena were observed during the drying, which may be due to the increased deposit-density by chopping, resulting in lowering the quality of the dried product. c. Sun-drying for the crushed material by hay-conditioner was required about 4 days to reduce the moisture content to about 10 %, keeping the quality of dried product at good grade. o. The optimum deposit-depth of the chopped seombody in the batch-type dryer used was about 28cm with about 42kg/hr of drying performance rate. However, it was necessary to overturn the materials between the upper and lower layers in order to obtain a good quality of dried product. d. The drying performance rate by the tunnel-type drier was highest among those of drying systems tested, giving the rate of approximately 400kg/day. 3. On reviewing the individual drying system for seombody, it was possible to draw conclusion that the best system was tunnel drying with the crushed seombody as far as the performance rate was concerned. However, the methods gives the highest operational cost. The system for the lowest operational cost with good quality of dried product was the sun-drying with the crushed material. Accordingly, it may be recommended that the system of sun-drying for the crushed seombody may be the most feasible system presently applicable to farm-level operation.

• Korean Journal of Medicinal Crop Science
• /
• v.23 no.3
• /
• pp.198-206
• /
• 2015

This study was conducted to investigate the effects of sowing density, number of seeds sown per hole, and thinning treatment on growth characteristics and disease occurrence in Panax ginseng under direct sowing cultivation in a blue plastic greenhouse. Seedling were grown from 2 or 3 seeds sown, and the healthiest was only retained, while the rest were thinned out at the foliation stage. $NO_3$-N, $P_2O_5$, and organic matter content differed significantly between growth conditions in the plastic greenhouse and in conventional shade in the soil. Disease also tended to be higher in the conventional shade than in the plastic greenhouse. Plant height and stem length showed an increasing trend with increasing sowing density and number of seeds sown per hole. However, these measures noticeably decreased when thinning treatment was conducted. Growth of the subterranean part of ginseng was not markedly influenced by sowing density, the number of seeds sown per hole, or thinning treatment. Root weight, which is an important factor in yield, was significantly affected by the number of seeds sown and thinning treatment. Interestingly, root weight tended to be higher in the thinning treatment plot than the untreated control plot. Damping-off and root rot increased noticeably as the number of seeds sown increased. Disease also tended to be substantially higher in the thinning treatment plot than the untreated control. However, physiological disorder of the plants did not vary with sowing density, the number of seeds sown, or thinning treatment.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.30 no.4
• /
• pp.662-667
• /
• 2001

Some biological activities and isoflavone (daidzein, genisten) contents were investigated from chungkugjang (CK) fermented with black beans and Bacillus strains at 42$^{\circ}C$ for 72 hr. n antibacterial activity, black bean CK fermented with Bacillus megaterium SMY-212 was higher than that ferment4d with B. subtilis. In both CK the methanol extract fo large black bean CK was more effective than that of small black bean CK was more effective than that of small black bean. Hydrogen-donating activity of methanol extract of chungjugjang (MEC) prepared with large and small black soybean showed to be 76.4 and 75.5%, respectively. Hydrogen-donating activity of MEC prepared with B. subtilis and SMY-212 was slightly highter than that without both strains. MEC of large black bean was higher in nitrite-scavenging activity than that of small black bean, and black bean CKs fermented with B. subtilis and SMY-212 have no difference in nitrite-scavenging activity B. subtilis and SMY-212. MEC of black bean showed strong antioxidative activity against peroxidation of linoleic acid and $H_2O$$_2$-FeSO$_4$-induced peroxidation of rat liver homogenate. MEC of black bean with Bacillus strains was higher in antioxidative activities than that of black bean without Bacillus strains. Contents of isoflavone (daidzein, genistein) were gradually increased during fermentation of CK. The isoflavone content was slightly higher in large black bean CK than in small black bean CK.