• Radiation Oncology Journal
• /
• 제9권2호
• /
• pp.337-342
• /
• 1991

방사선 선량의 표준측정법 (한국의학 물리학회 1990) 및 TG-21, $C_{\lambda}/C_E$ 방법을 비교 연구하였다. 방사선 치료에서 사용되는 광자선과(4MV-l5MV) 전자선(6MeV-20MeV)을 세 종류의 전리함으로 물팬틈속에서 측정, 평가한 결과를 비교하였다. TG-21과 방사선 선량의 표준 측정법 비교에서는1$\%$ 이내의 작은 차이만을 보여주었으며 그 차이는 주로 $N_{D}-N_{gas}$ 차이에서 나오는 것으로 평가되었다. 그러나 $C_{\lambda}/C_E$ 방법과의 비교에서는 광자선의 경우 $-1.9{\pm}0.6\%$ (방사선 선량의 표준 측정에 의한 결과가 높게 나옴) 전자선의 경우 $3.3{\pm}1\%$(방사선 선량의 표준측정법에 의한 결과가 낮게 나옴)의 차이를 보였다.

• 한국세라믹학회지
• /
• 제22권6호
• /
• pp.53-57
• /
• 1985

Korean montmorillonite from Youngil district was characterized by Alkylammonium derivatives. This method was very sensitive to the basal plane spacing d and the charge in the layer charge. The result include the values of average layer charge, charge distribution, equivalent area. interlayer cationic exchange capacity (C, E, C) and total C. E. C.

• 대한기계학회논문집
• /
• 제7권4호
• /
• pp.425-433
• /
• 1983

Fatigue tests by axial loading (R=0.1) were carried out to investigate fatigue crack growth properties of small surface cracks in mild steel at room temperature, 250.deg. C and 400.deg. C, by using flat specimens with a small artificial pit. All the data of the fatigue crack growth rate obtained in the present tests are determined as a function of the stress intensity factor range, so that the applicability of liner fracture mechanics to the fatigue crack growth of surface cracks at elevated temperatures is investigated and discussed in comparison with the data of type 304 stainless steel at room temperature and elevated temperature. The obtained results are as follows: 1) Relations of both surface fatigue crack length and its depth to cycle ratio fall within a narrow scatter band in spite of different stress levels. 2) The .DELTA. .sigma. .root. .pi. a-da/dN relation of surface fatigue crack growth at room temperature is independent of the stress level and can be plotted as a straight line at log-log diagram, but the relation at 400.deg. C depends partly on the stress level. 3) Relations of the fatigue crack growth into depth d(2b)/dN and is stress intensity factor range .DELTA. $K_{I}$, accounted for the aspect ratio variation, fall within a narrow scatter band for wide range of the applied stress levels. And .DELTA. $K_{I}$E-d(2b)/dN relations of mild steel at different stress level coincide relatively well with the data of type 304 stainless steel. 4) The value of aspect ratio obtained by a beach mark method and a temper coloring method approaches about 0.9 in common with crack growth and it is independent of stress level and temperatures. 5) The equi-crack length curve is parallel to S-N$_{f}$ curve at elevated temperatures.s.s.s.

• 대한수학회보
• /
• 제51권2호
• /
• pp.329-338
• /
• 2014

In this paper, we study the method of upper and lower solutions and develop the generalized quasilinearization technique for the existence and approximation of solutions to some three-point nonlocal boundary value problems associated with higher order fractional differential equations of the type $$^c{\mathcal{D}}^q_{0+}u(t)+f(t,u(t))=0,\;t{\in}(0,1)$$ $$u^{\prime}(0)={\gamma}u^{\prime}({\eta}),\;u^{\prime\prime}(0)=0,\;u^{\prime\prime\prime}(0)=0,{\ldots},u^{(n-1)}(0)=0,\;u(1)={\delta}u({\eta})$$, where, n-1 < q < n, $n({\geq}3){\in}\mathbb{N}$, 0 < ${\eta},{\gamma},{\delta}$ < 1 and $^c\mathcal{D}^q_{0+}$ is the Caputo fractional derivative of order q. The nonlinear function f is assumed to be continuous.

• 한국작물학회지
• /
• 제51권6호
• /
• pp.539-543
• /
• 2006

Lodging is classified as root lodging caused by the loss of supporting force in the root, bending caused by the deformation of the stem and breaking where the stem breaks down as loads exceeding critical elasticity were applied. This research excluded breaking which is not in a state of equilibrium and tried to partition the level of lodging using an algebraic model in root lodging and stem lodging, or bending. When a vertical load was applied, the deformation of the stem of rice plant showed the form of a quadratic equation. The trace of the panicle neck in the process of lodging was an ellipse-shape. When loading was pure root lodging, the trace of the panicle neck became a circle of which culm length is the radius. When it was a pure stem lodging, the trace of the panicle neck is an ellipse of which major axis is culm length and minor axis is 0.64* culm length. When both stem lodging and root lodging occurred in a natural setting, the partitioning of lodging can be calculated by a formula using eccentricity of an ellipse, S=e*100/0.768(S is the ratio of stem lodging in the whole lodging, e is eccentricity of the ellipse). This method is expected to be useful in simple lodging partitioning. We could also calculate the partitioning of stem lodging and root lodging as units of angles as an accuracy method, by using a straight line calculated by differentiating a quadratic equation of stem deformation at the origin of the coordinates. These two methods for dividing root and stem lodging showed different values. However, each of them showed almost same values with different lodging degree in one plant.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제53권10호
• /
• pp.495-499
• /
• 2004

Characteristics of ohmic Ni/Si/Ni contacts to n-type 4H-SiC are investigated systematically. The ohmic contacts were formed by annealing Ni/Si/Ni sputtered sequentially The annealings were performed at 950℃ using RTP in vacuum ambient and N₂ ambient, respectively. The specific contact resistivity(p/sub c/), sheet resistance(R/sub s/), contact resistance (R/sub c/) transfer length(L/sub T/) were calculated from resistance(R/sub T/) versus contact spacing(d) measurements obtained from TLM(transmission line method) structure. While the resulting measurement values of sample annealed at vacuum ambient were p/sub c/ = 3.8×10/sup -5/Ω㎠, R/sub c/ = 4.9 Ω and R/sub T/ = 9.8 Ω, those of sample annealed at N₂ ambient were p/sub c/ = 2.29×10/sup -4/Ω㎠, R/sub c/ = 12.9 Ω and R/sub T/ = 25.8 Ω. The physical properties of contacts were examined using XRD 3nd AES. The results showed that nickel silicide was formed on SiC and Ni was migrated into SiC. This result indicates that Ni/Si/Ni ohmic contact would be useful in high performance electronic devices.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 1999년도 제17회 학술발표회 논문개요집
• /
• pp.211-211
• /
• 1999

Titanium nitride (TiN) thin films have useful properties including high hardness, good electrical conductivity, high melting point, and chemical inertness. The applications have included wear-resistant hard coatings on machine tools and bearings, decorative coating making use of the golden color, thermal control coatings for widows, and erosion resistant coatings for spacecraft plasma probes. For all these applications as feature sizes shrink and aspect ratios grow, the issue of good step coverage becomes increasingly important. It is therefore essential to manufacture conformal coatings of TiN. The growth of TiN thin films by chemical vapor deposition (CVD) is of great interest for achieving conformal deposition. The most widely used precursor for TiN is TiCl4 and NH3. However, chlorine impurity in the as-grown films and relatively high deposition temperature (>$600^{\circ}C$) are considered major drawbacks from actual device fabrication. To overcome these problems, recently, MOCVD processes including plasma assisted have been suggested. In this study, therefore, we have doposited Ti(C, N) thin films on Si(100) and D2 steel substrates in the temperature range of 150-30$0^{\circ}C$ using tetrakis diethylamido titanium (TDEAT) and titanium isopropoxide (TIP) by pulsed DC plamsa enhanced metal-organic chemical vapor deposition (PEMOCVD) method. Polycrystalline Ti(C, N) thin films were successfully grown on either D2 steel or Si(100) surfaces at temperature as low as 15$0^{\circ}C$. Compositions of the as-grown films were determined with XPS and RBS. From XPS analysis, thin films of Ti(C, N) with low oxygen concentration were obtained. RBS data were also confirmed the changes of stoichiometry and microhardness of our films. Radical formation and ionization behaviors in plasma are analyzed by optical emission spectroscopy (OES) at various pulsed bias and gases conditions. H2 and He+H2 gases are used as carrier gases to compare plasma parameter and the effect of N2 and NH3 gases as reactive gas is also evaluated in reduction of C content of the films. In this study, we fond that He and H2 mixture gas is very effective in enhancing ionization of radicals, especially N resulting is high hardness. The higher hardness of film is obtained to be ca. 1700 HK 0.01 but it depends on gas species and bias voltage. The proper process is evident for H and N2 gas atmosphere and bias voltage of 600V. However, NH3 gas highly reduces formation of CN radical, thereby decreasing C content of Ti(C, N) thin films in a great deal. Compared to PVD TiN films, the Ti(C, N) film grown by PEMOCVD has very good conformability; the step coverage exceeds 85% with an aspect ratio of more than 3.

• Asian-Australasian Journal of Animal Sciences
• /
• 제22권12호
• /
• pp.1625-1632
• /
• 2009

Four lactating Holstein Friesian crossbred cows, with an average initial weight of 450 kg, 48${\pm}$12 days in milk and initial milk yield of 18 kg/h/d, were randomly arranged according to a 2${\times}$2 factorial arrangement in a 4${\times}$4 in Latin square design with 21-d period to investigate the effects of type of total mixed ration (TMR) and type of whole cottonseed (WCS) on intake, digestibility and milk production. The dietary treatments were i) TMR and WCS supplementation at 0.5 kg/h/d, ii) TMR and cracked WCS (cWCS) supplementation at 0.5 kg/h/d, iii) fermented TMR (FTMR) and WCS supplementation at 0.5 kg/h/d, and iv) FTMR and cWCS supplementation at 0.5 kg/h/d. Voluntary feed intake was 15.9, 15.2, 15.4 and 15.6 kg DM/d in dietary treatment 1, 2, 3 and 4, respectively. Digestibility of DM, OM, CP, EE, NDF and ADF were not significantly different among dietary treatments. Ruminal pH, $NH_{3}-N$ and volatile fatty acids in the rumen were also not significantly different among type of TMR or type of WCS. Blood urea-N concentration was not significantly different among dietary treatments. Ruminal bacteria population tended to increase but ruminal protozoa population tended to decrease with supplementation of cWCS, but they were not affected by FTMR. Milk yield and 3.5% FCM were not statistically different among treatments (16.6, 16.2, 17.0, 16.3 kg/d and 18.0, 18.6, 19.9 and 19.0 kg/d, respectively). Milk composition was not significantly different among dietary treatments. However, unsaturated fatty acids in milk fat in cows fed FTMR were lower (p<0.05) than in cows fed TMR. In conclusion, fermentation is a conceivable method to improve the quality of TMR for long-time storage and the cracking method is suitable to release the fat from cottonseed for enhancing fatty acid deposition in milk. Thus, the combination of FTMR and cWCS supplementation would be an alternative strategy to improve performance of lactating cows.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.176.1-176.1
• /
• 2014

Graphene has attracted an increasing attention due to its extraordinary electronic, mechanical, and thermal properties. Especially, the two dimensional (2D) sheet of graphene with an extremely high surface to volume ratio has a great potential in the preparation of multifunctional nanomaterials, as 2D supports to host metal nanoparticles (NPs). Copper oxide is widely used in various areas as antifouling paint, p-type semiconductor, dry cell batteries, and catalysts. Although the copper oxide(II) has been well known for efficient catalyst in C-N cross-coupling reaction, copper oxide(I) has not been highlighted. In this research, CuO and Cu2O nanoparticles (NPs) dispersed on the surface of grapehene oxide (GO) have been synthesized by impregnation method and their morphological and electronic structures have been systemically investigated using TEM, XRD, and XAFS. We demonstrate that both CuO and Cu2O on graphene presents efficient catalytic performance toward C-N cross coupling reaction. The detailed structural difference between CuO and Cu2O NPs and their effect on catalytic performance are discussed.

• 한국응용과학기술학회지
• /
• 제31권3호
• /
• pp.352-358
• /
• 2014

포화지방산(C12, C14, C16, C18) 단분자층 LB막의 전기화학적 특성을 통하여 그 안정성을 순환전압전류법으로 조사하였다. 포화지방산 단분자층 LB막은 ITO glass에 LB법을 사용하여 제막하였다. 전기화학적 특성은 0.1 N $NaClO_4$ 용액에서 3 전극 시스템으로 순환전압전류법에 의해 측정하였다. 측정범위는 연속적으로 1650 mV로 산화시키고, 초기 전위인 -1350 mV로 환원시켰다. 주사속도는 각각 50, 100, 150, 200 및 250 mV/s로 설정하였다. 그 결과 포화지방산 LB막은 순환전압전류곡선으로부터 산화전류로 인한 비가역공정으로 나타났다. 포화지방산 LB막의 확산계수(D)를 산출한 결과 각각 라우르산, $2.223{\times}10^{-3}cm^2/s$, 미리스트산, $2.461{\times}10^{-4}cm^2/s$, 팔미트산, $7.114{\times}10^{-4}cm^2/s$ 및 스테아르산, $2.371{\times}10^{-4}$을 얻었다.