• Nuclear Engineering and Technology
• /
• 제51권5호
• /
• pp.1373-1380
• /
• 2019

Besides promising implications as fertile nuclear materials, thorium carbonitrides are of great interest owing to their peculiar physical and chemical properties, such as high density, high melting point, good thermal conductivity. This paper reports first-principles simulation results on the structural, electronic and magnetic properties of cubic thorium carbonitrides $ThC_xN_{(1-x)}$ (X = 0.03125, 0.0625, 0.09375, 0.125, 0.15625) employing formalism of density-functional-theory. For the simulation of physical properties, we incorporated full-potential linearized augmented plane-wave (FPLAPW) method while the exchange-correlation potential terms in Kohn-Sham Equation (KSE) are treated within Generalized-Gradient-Approximation (GGA) in conjunction with Perdew-Bruke-Ernzerhof (PBE) correction. The structural parameters were calculated by fitting total energy into the Murnaghan's equation of state. The lattice constants, bulk moduli, total energy, electronic band structure and spin magnetic moments of the compounds show dependence on the C/N concentration ratio. The electronic and magnetic properties have revealed non-magnetic but metallic character of the compounds. The main contribution to density of states at the Fermi level stems from the comparable spectral intensity of Th (6d+5f) and (C+N) 2p states. In comparison with spin magnetic moments of ThSb and ThBi calculated earlier with LDA+U approach, we observed an enhancement in the spin magnetic moments after carbon-doping into ThN monopnictide.

• 대한치과보철학회지
• /
• 제45권5호
• /
• pp.675-686
• /
• 2007

Statement of problem: Titanium nitride(TiN) coatings are the most general and popular coating method and used to improve the properties of metallic surface for industrial purposes. When TiN coating applied to the abutment screw, frictional resistance would be reduced, as a results, the greater preload and prevention of the screw loosening could be expected. Purpose: The purpose of this study was to investigate mechanical properties of TiN coated film of various coating thickness on the titanium alloy surface and to evaluate proper coating thickness. Material and method: 95 Titanium alloy (Ti-6Al-4V) discs of 15 mm in diameter and 3 mm in thickness were prepared for TiN coating and divided into 7 groups in this study. Acceding to coating deposition time (CDT) with TiN by using Arc ion plating, were divided into 7 groups : Group A (CDT 30min), Group B (CDT 60min), Group C (CDT 90min), Group D (CDT 120min), Group E (CDT 150min), Group F(CDT 180min) and Group G (no CDT) as a control group. TiN coating surface was observed with Atomic Force Microscope(AFM), field emission scanning electron microscopy(FE-SEM) and examined with scratch tester, wear tester. Result: 1. Coating thickness fir each coated group was increased in proportion to coating deposition time. 2. Surface of all coated groups except Group A was homogeneous and smooth. However, surface of none coated Group G had scratch. 3. Adhesion strength for each coated group was increased in proportion to coating deposition time. 4. Wear resistance for each coated group was increased in proportion to coating deposition time. 5. Surface roughness in Group A, B, C was increased in proportion to coating deposition time. But, surface roughness in Group D, E, F was showed decreased tendency in proportion to coating deposition time. Conclusion: According to coating deposition time, mechanical properties of TiN coated film were changed. It was considered that 120 minutes coating deposition time ($1.32{\mu}m$ in coating thickness) is necessary.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 하계종합학술대회 논문집(2)
• /
• pp.32-35
• /
• 2000

Oxide-nitride-oxide(ONO) structures were formed by sequential radio frequency reactive magnetron sputtering method. The chemical composition and structure of these films were studied by using of secondary ion mass spectroscopy(SIMS) and Auger electron spectroscopy(AES) SIMS and AES experiments show the existence of nitridation at the SiO$_2$/Si substrate. The electrical characteristics of ONO films were evaluated by I-V and high frequency C-V measurements When the ONO films were annealed at 90$0^{\circ}C$ for 30 sec in $N_2$ ambient, the breakdown voltage increased and flat-band voltage decreased under high electric field.

• 화약ㆍ발파
• /
• 제16권3호
• /
• pp.16-24
• /
• 1998

Methods of Rock fragmentation are used rock of housing repair development at KU-SAN DONG area in seoul Youn-Pyong Ku. So, Theorical analyses of the effect of vibration and frequency on structural damage around old housed also discussed. The results can be summarized as follows: 1. A area(Rock area not more than 15m Ku-San Mention) Some Empirical equations were obtained $V=K\{{\frac{D}{W}}1/3\}^{-n}$ where the values for n and K are estimated to be -1.64 and 94 respectively, this values were obtained only theorical analyses. If we have 125g charge this area is impossible blasting operation, so this area must be worked by SRS(Super Rock Splitter) method. 2. B area(Rock area from 15m to 25m in a boundary line from Ku-San Mention) This area charge is about 125g in a delay time by some empirical equation s. So, this area can be blasting operations by small charge. 3. C area(Rock area from 25m to 35m in a boundary line from Ku-San Mention) This area charge is about 500g in delay time by some empirical equation s. So, this area can be blasting operations by middle charge. 4. D area(Rock area more then 35m in a boundary line from Ku-San Mention) This area charge is about 1000g in a delay time by some empirical equation s. So, this area can be blasting operations by middle charge.

• 한국통신학회논문지
• /
• 제33권3C호
• /
• pp.255-261
• /
• 2008

3차원 물체에 대한 디지털 홀로그램을 합성할 때 사용되는 기존의 LT(look-up table) 방식은 고속연산은 가능하나 과도한 데이터 저장 공간을 요구하는 단점을 가지고 있다. 따라서 본 논문에서는 기존의 LT 방식의 연산속도는 그대로 유지하면서도 데이터 저장용량을 획기적으로 줄여줄 수 있는 새로운 룩업테이블 방식인 N-LT(novel look-up table) 제시하였다. 즉, 제안된 방식에서는 기존 LT 방식에서와 같이 3차원 물체의 모든 방향의 포인트가 아닌 각 깊이 방향의 포인트에 대한 요소 프린지 패턴만을 저장하고, 그 깊이 평면에 존재하는 포인트들의 프린지 패턴은 요소 프린지 패턴을 이동시켜 계산하게 된다. 실험 결과 제안된 N-LT 방식은 기존의 광선추적(ray-tracing) 방식에 비해 48.7배의 속도향상을 갖고, 기존의 LT 방식에 비해 1/217 정도의 데이터 공간이 필요함이 분석되었다.

• 대한화학회지
• /
• 제33권1호
• /
• pp.46-54
• /
• 1989

식품 및 비타민 제제중에 존재하는 지용성 비타민의 추출 및 동시 정량법을 검토하였다. 역상 액체크로마토그래피에 의한 지용성 비타민의 동시 분리 및 정량은 메탄올 : 물 = 95 : 5 이동상으로 Novapak $C_{18}$ 컬럼하에서 이루어졌다. 비타민의 검출에는 UV검출기를 사용하였으며 검출감도를 증가시키기 위하여 분석중 UV 검출파장을 각각의 비타민 용리시간에 따라 최대흡수 파장인 330, 265, 285 및 290nm로 변경하였다. 지용성 비타민의 분리 및 분석은 40분안에 완료되었다. 시료의 전처리에는 알카리 가수분해법과 효소가수분해법을 이용하였으며, 비타민의 추출은 액체-액체추출법과 액체-고체추출법을 이용하였다. 비타민 A,D, E 분석에는 알카리 가수분해법 및 효소가수분해법이 비타민 K 분석에는 효소가수분해법만이 좋은 결과를 나타냈으며, 비타민 추출에는 액체-액체 추출시 diethyl ether, pentane 및 n-hexane이, 액체-고체 추출시 silica 카트리지가 좋은 추출효과를 나타냈다.

• Journal of Magnetics
• /
• 제5권4호
• /
• pp.120-123
• /
• 2000

Co-Ni-Fe-N thin films were fabricated by a $N_2$ reactive rf magnetron sputtering method. The nitrogen partial pressure ($P_{N2}$) was varied in the range 0~10% . As$P_{N2}$ increases in this range, the saturation magnetization $B_s$ linearly decreases from 19.8 kG to 14 kG and the electrical resistivity ($\rho$) increases from 27 to 155 $\mu\Omegacm$. The coercivity $H_c$ exhibits the minimum value at 4% $P_{N2}$. The magnetic anisotropy fields ($H_k$) are in the range of 20$\sim$50 Oe. High frequency characteristics of $(Co_{22.2}Ni_{27.6}Fe_{50.2})_{100-x}N_x$ films are excellent in the range of 3$\sim$5% of $P_{N2}$. In particular, the effective permeability of the film fabricated at 4% $P_{N2}$ is 800, which is maintained up to 600 MHz. This film also shows Bs of 17.5 kG, $H_c$/ of 1.4 Oe, resistivity of 98$\mu\Omegacm$ and $H_k$ of about 25 Oe. Also, the corrosion resistance of $(Co_{22.2}Ni_{27.6}Fe_{50.2})_{100-x}N_x$ films was imp roved with increasing N concentration.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2000년도 International Symposium on Magnetics The 2000 Fall Conference
• /
• pp.492-499
• /
• 2000

Co-Ni-Fe-N thin films were fabricated by a N$\sub$2/ reactive rf magnetron sputtering method. The nitrogen partial pressure (P$\sub$N2/) was varied in the range of 0∼10%. As P$\sub$N2/ increases in this range, the saturation magnetization (B$\sub$s/) linearly decreases from 19.8 kG to 14 kG and the electrical resistivity ($\rho$) increased from 27 to 155 ${\mu}$$\Omega$cm. The coercivity (H$\sub$c/) exhibits the minimum value at 4% of P$\sub$N2/. The magnetic anisotropy (H$\sub$k/) are in the range of 20∼50 Oe. High frequency characteristics of (Co$\sub$22.2/Ni$\sub$27.6/Fe$\sub$50.2/)$\sub$100-x/N$\sub$x/ films are excellent in the range of 3∼5% of P$\sub$N2/. Especially the effective permeability of the film fabricated at 4% of P$\sub$N2/ is 800, which is maintained up to 600 MHz. This film also shows Bs of 17.5 kG, H$\sub$c/ of 1.4 Oe, resistivity of 98 $\Omega$cm and H$\sub$k/ of about 25 Oe. Also, the corrosion resistance of (Co$\sub$22.2/Ni$\sub$27.6/Fe$\sub$50.2/)$\sub$100-x/N$\sub$x/ were improved with the increase in N concentration.

• 한국지반환경공학회 논문집
• /
• 제13권8호
• /
• pp.85-94
• /
• 2012

실내시험을 통하여 현장여건을 고려한 스미어 영향을 평가하기 위하여 3종류(C:M=1:0, C:M=0.5:0.5, C:M=0:1)의 재성형 시료를 이용하여 다양한 조건의 3차원 실내 모형시험을 30종 실시하여 스미어 존의 발생범위를 측정하고 대표적인 위치에서 시료를 채취하여 스미어 존 내에서의 투수계수의 변화특성을 검토하였다, 연구결과, C:M=1:0(점토 100%)의 경우 맨드렐 관입길이, 맨드렐의 크기, 토압고려여부, 단위중량 및 맨드렐의 형상의 순으로 스미어 존의 발생범위에 큰 영향을 미치는 것을 알았다. 따라서, 현장에서 맨드렐의 관입, 인발의 영향을 크게 받는 장척의 배수재를 설치하는 경우에는 기존의 실내시험을 통한 연구결과에 비해 스미어 존이 더욱 크게 형성되며, 스미어 존(smear zone)의 직경 ($d_s$)은 맨드렐(mandrel) 환산직경($d_m$)의 약 1.89~2.48배로 나타났다. 지반밀도와 맨드렐관입특성이 동일한 조건인 경우에 실트의 함유량이 높은 지반일수록 스미어 존의 발생범위는 넓어지는 것을 알았다. 현장의 토압이 크게 고려될수록, 맨드렐 사이즈가 클수록, 단위중량이 작을수록 스미어 존의 발생범위는 적게 나타났다. 맨드렐 관입, 인발에 의한 투수계수 비($k_{hs}/k_{ho}$)는 재성형시료를 사용한 본 실험에서 평균적으로 약 0.70~0.85의 범위를 나타냈으며, 투수계수저하의 영향요인과 영향치는 스미어 존의 발생범위와 유사하게 나타나는 것을 알았다.

• 한국전자파학회논문지
• /
• 제11권3호
• /
• pp.445-453
• /
• 2000

본 논문에서는 MMlC 설계에서 필요한 능동 인덕터의 설계 방법을 제시하였다. 제안된 가변 능동 인덕터는 궤환 커패시터와 궤환 저항을 가진 종속접속된 2개의 FET로 구성을 하였다. 제안된 가변 능동 인덕터는 낮은 직렬 저항을 가져서 상대적으로 높은 Q 값을 얻을 수 있고 높은 주파수대에서 사용이 가능한 우수한 동작 특성 을 가진다. 인덕턴스 값은 궤환 커패시터와 궤환 저항 및 바이어스 전압에 의하여 변화되어지며 궤환 저항과 회 로내 병렬 저항을 가변하였을 때 1 GHz에서 15 GHz까지 범위에서 인덕턴스 값이 0.2nH에서 L7nH까지 변화하 였다. 또한 제안된 능동 인덕터를 사용하여 대역통과 필터를 설계하였을 때 삽입손실은 약 0.4 dB이고 반사 손실은 20dB 이상의 우수한 결과를 얻을 수 있었다