• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.9 no.1
• /
• pp.39-42
• /
• 1999

Nitrogen-doped SiC(3C) (N-SiC(3C)) epliayers were grown on Si(111) substrate at $1250^{\circ}C$ using chemical vapor deposition (CVD) technique by pyrolyzing tetramethylsilane(TMS) in $H_{2}$ carrier gas. SiC(3C) layer was doped using $NH_{3}$ during the CVD growth to be n-type conduction. Physical properties of N-SiC(3C) were investigated by Fourier transform infrared (FTIR) spectroscopy, X-ray diffraction (XRD) patterns, Raman spectroscopy, cross-sectional transmission electron microscopy (XTEM), Hall measurement, and current-voltage(I-V) characteristcs of the N-SiC(3C)/Si(p) diode. N-SiC(3C) layers exhibited n-type conductivity. The n-type doping of SiC(3C) could be controlled by nitrogen dopant using $NH_{3}$ at low temperature.

• Journal of Intelligence and Information Systems
• /
• v.22 no.2
• /
• pp.115-125
• /
• 2016

The Bollinger Band indicating the current price position in the recent price action range is obtained by adding/substracting the simple standard deviation (SSD) to/from the simple moving average (SMA). In this paper, we first compare the characteristics of the SMA and the exponential moving average (EMA) in the operator's point of view. A basic equation is obtained between the interval length N of the SMA operator and the weighting factor ${\rho}$ of the EMA operator, that makes the centers of the 1st order momentums of each operator impulse respoinse identical. For equivalent N and ${\rho}$, frequency response examples are obtained and compared by using the discrete time Fourier transform. Based on observation that the SMA operator reacts more excessively than the EMA operator, we propose a novel exponential standard deviation (ESD) band centered at the EMA and derive an auto recursive formula for the proposed ESD band. Practical examples for the ESD band show that it has a smoother bound on the price action range than the Bollinger Band. Comparisons are also made for the gap corrected chart to show the advantageous feature of the ESD band even in the case of gap occurrence. Trading techniques developed for the Bollinger Band can be straight forwardly applied to those for the ESD band.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.6C
• /
• pp.751-762
• /
• 2004

In this paper, we propose the method to derive new GRM(Generalized Reed-Muller) coefficients for each 2$^n$ polarities using Triangle cell. As the existing methods to generate GRM coefficients, there are Green's method to operate transform matrix with a given RM coefficient and Besslich's method to get other polarities using basic transfer matrices repeatedly. In this paper, Triangle cell is defined so as to obtain GRM coefficients efficiently. After arranging 2$^n$ given RM coefficients of a first row of Triangle cell, sequence modulo sum is peformed in parallel to low column by a fixed numerical formula. To prove the efficiency of proposed arithmetic method, it is compared with Besslich’s method. As the compared result, to calculate GRM coefficients of all polarities to n input variables, Besslich’s method needs 2$^n$$^{-1}$ ${\times}$(2$^n$-1) two-input Ex-ORs and the proposed method needs 2${\times}$(the number of Ex-ORs for n-1 variables)+3$^n$$^{-1}$ for the same system complexity - (lo $g_2$$^n$) $T_{X}$./.

• ETRI Journal
• /
• v.40 no.4
• /
• pp.537-545
• /
• 2018

In this paper, we present a comprehensive analytical study of the symbol error rate (SER) of single-carrier frequency-division multiple access (SC-FDMA) with zero-forcing frequency domain equalization (ZF-FDE) over a Rayleigh fading channel. SC-FDMA is considered as a potential waveform candidate for fifth-generation (5G) radio access networks (RANs). First, the $N_C$ fold convolution of the noise distribution of an orthogonal frequency-division multiplexing (OFDM) system is computed for each value of the signal-to-noise ratio (SNR) in order to determine the noise distribution of the SC-FDMA system. $N_C$ is the number of subcarriers assigned to a user or the size of the discrete Fourier transform (DFT) precoding. Here, we present a simple alternative method of calculating the SER by simplifying the $N_C$ fold convolution using time and amplitude scaling properties. The effects of the $N_C$ fold convolution and SNR over the computation of the SER of the SC-FDMA system has been separated out. As a result, the proposed approach only requires the computation of the $N_C$ fold convolution once, and it is used for different values of SNR to calculate the SER of SC-FDMA systems.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.04b
• /
• pp.3-6
• /
• 2009

Aluminum nitride (AIN) thin films were deposited on a polycrystalline 3C-SiC intermediate layer by a pulsed reactive magnetron sputtering system. Characteristics of the AIN/SiC heterostructures were investigated by field emission scanning electron microscopy (FE-SEM), atomic force microscopy (AFM), X-ray diffraction (XRD), and Fourier transform infrared spectroscopy (FT-IR). The columnar structure of AIN thin films was observed by FE-SEM. The surface roughness of AlN films on the 3C-SiC buffer layer was measured using AFM. The XRD pattern of AlN films on SiC buffer layers was highly oriented at (002). Full width at half maximum (FWHM) of the rocking curve near (002) reflections was $1.3^{\circ}$. The infrared absorbance spectrum indicated that the residual stress of AIN thin films grown on SiC buffer layers was nearly negligible. The 3C-SiC intermediate layers are promising for the realization of nitride based electronic and mechanical devices.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.23 no.7
• /
• pp.1860-1868
• /
• 1998

A simple postprocessing algorithm is proposed to reduce the blocky artifacts of Block Discrete Cosine Transform (BDCT) coded images. Since the block noise is mostly antisymmetric relative to the block boundaries, we model the blocky noise as one-dimensional antisymmertric functions made by superposing DCT basis functions. observing the frequency characteristics of the noies model, we approximate its high frequency components as those of step functions. Then the proposed postprocessing algorithm eliminates the carefully selected high frequency components of step functions in the one-dimensional sN-point DCT domain, when the encoding block size is $N\;{\times}\;N$. It is shown that the proposed algorithm can also be performed in the spatial domain without computational burden of transforms. The experimental results show that the proposed algorithm well reduces the blocky artifacts in both subjective and objectie viewpoints.

• Advances in environmental research
• /
• v.2 no.4
• /
• pp.309-321
• /
• 2013

High AA new high capacity sorbent for preconcentration and determination of nickel in environmental samples was synthesized. The sorbent was synthesized by copolymerization of allyl glaycidyl ether / imminodiacetic acid with N,N-dimethylacrylamide as functional monomers in the presence of N,N-bismethylenacryl amid as cross linker and characterized by Fourier transform infra red spectroscopy, elemental analysis, thermogravimetric analysis and scanning electron microscopy. A recovery of 93.6% was obtained for the metal ion with 0.1 M, sulfuric acid as the eluting agent. The sorption capacity of the functionalized sorbent was 55.9 $mgg^{-1}$. The equilibrium sorption data of Ni(II) on polymeric sorbent were analyzed using Langmuir, Freundlich, Temkin and Redlich.Peterson models. Based on equilibrium adsorption data the Langmuir, Freundlich and Temkin constants were determined 0.87 (L mg-1), 25.87 ($mgg^{-1}$) $(Lmg^{-1})^{1/n}$ and 171.4 ($Jmol^{-1}$) respectively at pH 4.5 and $20^{\circ}C$.

• Polymer(Korea)
• /
• v.36 no.6
• /
• pp.822-830
• /
• 2012

We used dipodal type bis[3-(trimethoxysilyl)propyl]amine (BTMA) silane coupling agent to modify silica nanoparticles to introduce secondary amino groups on the silica surface. These N-H groups were reacted with three different molecular weights (M.W. = 258, 575, and 700) of poly(ethylene glycol) diacrylates to introduce different attached layer thicknesses on the silica surface by Michael addition reaction. After Michael addition reaction, we used several analytical techniques such as fourier transform infrared spectroscopy (FTIR), elemental analysis (EA) and solid state $^{13}C$ cross-polarization magic angle spinning (CP/MAS) nuclear magnetic resonance spectroscopy to characterize introduced structures. We found almost complete Michael addition reaction of both two acrylate groups of PDGDA with N-H groups of BTMA modified silica to form ${\beta}$-amino acid esters. Between equimolar ratio of pure BTMA and pure PEGDA reaction, only one acrylate group of two acrylate groups of PEGDA reacted with N-H groups of pure BTMA to form ${\beta}$-amino acid ester and the other remaining acrylate group can be used to form a polymer later.

• Journal of applied mathematics & informatics
• /
• v.10 no.1_2
• /
• pp.217-226
• /
• 2002

A circular plate kept zero initial temperature is heated for a certain interval of time over a concentric circular region of the upper face. Deflection is obtained by using Laplace transform technique. Taking the plate material to be aluminium, central deflection is obtained for several values of time and the results shown graphically.

• Journal of applied mathematics & informatics
• /
• v.10 no.1_2
• /
• pp.175-191
• /
• 2002

The equations of a polar fluid of hydromagnetic fluctuating through a porous medium axe cast into matrix form using the state space and Laplace transform techniques the resulting formulation is applied to a variety of problems. The solution to a problem of an electrically conducting polar fluid in the presence of a transverse magnetic field and to a problem for the flow between two parallel fixed plates is obtained. The inversion of the Laplace transforms is carried out using a numerical approach. Numerical results for the velocity, angular velocity distribution and the induced magnetic field are given and illustrated graphically for each problems.