• 제목/요약/키워드: N-doped ZnO

검색결과 154건 처리시간 0.023초

Structural and Electrical Transport Properties of Zn Doped CuCrO2 by Pulsed Laser Deposition

  • 김세윤;성상윤;추만헝;조광민;우진규;이준형;김정주;허영우
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2010년도 제39회 하계학술대회 초록집
    • /
    • pp.256-256
    • /
    • 2010
  • 투명전극부터 디스플레이 산업에 이르기까지 광범위하게 응용되어지고 있고 개발되어지고 있는 투명전도산화물(TCO)은 ZnO, In2O3, SnO2 등을 기본으로 하는 n-type 재료가 대부분이다. 그러나 투명전도 산화물을 이용한 light emitting diode(LED), 투명한 태양전지, p-형 TFT와 같은 투명전자소자의 개발을 위해서는 p-type 소재가 필수적이다. p-type TCO 소재는 비교적 연구 개발 실적이 매우 부진한 실정이었다. 1997년 넓은 밴드갭을 가지는 ABO2(delafossite) 산화물이 p-type으로서 안정적이라는 것을 보고함에 따라 이에 대한 연구가 활발히 진행되고 있다. 현재 ABO2 형태를 가진 Delafossite구조 산화물이 가장 유망한 p-type 투명전도체 소재로 거론되고 있다. Delafossite 구조가 p-type 투명전도체에 적합한 결정구조인 이유는 밴드갭이 넓고 공유결합에 유리하기 때문이다. Delafossite구조는 상온에서 2종류의 polytype(상온에서 Rhombohedaral구조와 hexagonal 구조)이 존재하며 이들은 각각 3R 및 2H의 결정 구조를 가지고 있다. ABO2의 delafossite구조에서 Cu+의 배열은 c-축을 따라 Cu-O-Cr-O-Cu의 연속적인 층 구조로서 2차원연결로 보여 진다. 보고된 Cu- base delafossite구조를 가지는 재료들은 CuAlO2, CuGaO2, CuInO2 등 여러가지가 있다. 본 연구에서는 PLD를 이용하여 c-plane 사파이어 기판위에 성장된 delafossite구조인 CuCrO2박막의 특성을 알아보았다. p-type 특성을 위하여 CuCrO2에 Zn를 첨가하였으며 그에 따른 구조적 전기적 특성을 조사하였다. 성장온도와 산소분압을 $500{\sim}700^{\circ}C$, 0~10mTorr로 변화시켜 특성을 연구하였다. 성장온도 $700^{\circ}C$, 산소분압 10mTorr에서 c-plane 사파이어 기판위에 c-축 배향의 에피성장된 CuCrO2:Zn 박막을 얻을 수 있었다. Mg를 도핑함에 따른 p-type 특성보다 현저히 떨어지는 것을 확인하였다. 또한 동일한 조건임에도 특정한 이차상의 존재를 통해 도핑된 Zn의 위치를 추측할 수 있었다. 온도와 분압에 따른 결정성과 표면상태를 SEM을 통해서 확인하였다.

  • PDF

퇴적 온도와 열처리에 따른 SiC에 퇴적된 Ga 도핑된 ZnO의 구조 및 전기적 특성 (Deposition Temperature and Annealing Temperature Dependent Structural and Electrical Properties of Ga-doped ZnO on SiC)

  • 이정호;구상모
    • 한국전기전자재료학회논문지
    • /
    • 제25권2호
    • /
    • pp.121-124
    • /
    • 2012
  • The characteristics of Ga-doped zinc oxide (GZO) thin films deposited at different deposition temperatures (TS~250 to $550^{\circ}C$) on 4H-SiC have been investigated. Structural and electrical properties of GZO thin film on n-type 4H-SiC(0001) were investigated by using x-ray diffraction(XRD), atomic force microscopy(AFM), Hall effect measurement, barrier height from I-V curve and Auger electron spectroscopy(AES). XRD $2\theta$ scan shows GZO thin film has preferential orientation with c-axis perpendicular to SiC substrate surface. The lowest resistivity ($\sim1.9{\times}10^{-4}{\Omega}cm$) was observed for the GZO thin film deposited at $400^{\circ}C$. As deposition temperature increases, barrier height between GZO and SiC was increased. Whereas, resistivity of GZO thin films as well as barrier height between GZO and SiC were increased after annealing process in air atmosphere. It has been found that the c-axis oriented crystalline quality as well as the relative amount of activated Ga3+ ions and oxygen vacancy may affect the electrical properties of GZO films on SiC.

수열합성법으로 합성된 산화아연 나노 구조 박막의 광촉매적 응용 (Hydrothermally Synthesis Nanostructure ZnO Thin Film for Photocatalysis Application)

  • ;남민식;;전성찬
    • KEPCO Journal on Electric Power and Energy
    • /
    • 제2권1호
    • /
    • pp.97-101
    • /
    • 2016
  • 산화아연은 다양한 나노 구조와 특유의 특성으로 인하여 여러 분야에서 많은 관심을 받고있는 물질이다. 산화아연을 합성하는 다양한 방법 중에서, 수열합성법은 간단하고 친환경적인 장점을 가지고 있다. 나노 구조를 가지는 산화아연 박막은 수열합성법을 통하여 FTO 전극 위에 제작되었다. 성장된 산화아연은 X-ray diffraction (XRD)와 Field-emission scanning electron microscopy (FESEM)을 통하여 분석되었다. XRD 분석에서 산화아연 박막이 자연상태의 hexagonal wurtzite 상으로 구성되어 있음을 확인하였으며 SEM 사진에서는 나노 로드 형태를 구성하고 있는 것을 확인할 수 있었다. 본 연구에서는 UV 영역의 흡수 스펙트럼을 분석하여 산화아연이 보이는 365 nm 파장에서의 흡수를 확인하였다. 또한 photoluminescence 방출을 분석한 결과, 424 nm의 band edge emission과 500 nm에서 산화아연의 oxygen vacancies에 의한 방출을 확인하였다. 또한 라만 스펙트럼 분석을 통하여 본 연구진이 제작한 산화아연이 높은 결정성을 가지고 있는 것을 확인할 수 있었다. 이러한 연구를 통하여 다양한 특성을 가진 산화아연의 광촉매적 적용을 기대할 수 있다.

산화물 반도체의 다양한 처리를 통한 박막트랜지스터의 전기적 특성 향상 (A Review : Improvement of Electrical Performance in the Oxide Semiconductor Thin Film Transistor Using Various Treatment)

  • 김태용;장경수;;;이소진;강승민;;이윤정;이준신
    • 한국전기전자재료학회논문지
    • /
    • 제29권1호
    • /
    • pp.1-5
    • /
    • 2016
  • The ultimate aims of display market is transparent or flexible. Researches have been carried out for various applications. It has been possible to reduced the process steps and get good electrical properties for semiconductors with large optical bandgaps. Oxide semiconductors have been established as one of the leading and promising technology for next generation display panels. In this paper, alternative treatment processes have been tried for oxide semiconductors of thin film transistors to increase the electrical properties of the thin film transistors and to investigate the mechanisms. There exist a various oxide semiconductors. Here, we focused on InGaZnO, ZnO and InSnZnO which are commercialized or researched actively.

AZO 박막 위에 전기화학증착법에 의해 제작된 ZnO 나노로드의 전기 및 광학적 특성

  • 주동혁;이희관;유재수
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2011년도 제40회 동계학술대회 초록집
    • /
    • pp.101-101
    • /
    • 2011
  • 투명전도성산화물(transparent conducting oxides, TCOs) 박막으로써 널리 쓰이는 산화인듐주석(indium tin oxide, ITO)은 전기 전도성과 광 투과성이 우수하여 주로 유기발광다이오드(organic light-emitting diode, OLED)의 전극, 발광다이오드(light-emitting diode, LED)의 current spreading 층 및 태양전지(solar cell)의 윈도우층(window layer) 등의 광전자 소자로 응용되고 있으나, 고가의 indium 가격과 인체에 유해한 독성 등이 문제점으로 지적되고 있다. 따라서 indium의 함량을 저감한 새로운 조성의 TCO 또는 indium을 함유하지 않은 친환경적인 TCO 대체 재료 개발의 필요성이 증대되고 있다. 이러한 재료 중 하나인 AZO (Al-doped zinc oxide, $Al_2O_3$: 2 wt.%)는 3.82eV의 넓은 에너지 밴드갭을 가지며, 가시광선 및 근 적외선 파장 영역에 대하여 90% 이상의 높은 투과율을 나타낸다. 또한, 습식식각이 가능하며, 매우 풍부하여 원가가 매우 저렴하고, 독성이 없다. 본 연구에서는 박막 증착율이 높고, 제작과정의 조정이 용이한 RF magnetron 스퍼터를 이용하여 glass 기판 위에 AZO 박막을 성장하고, $N_2$ 분위기에서 다양한 온도 조건에서 열처리(rapid thermal annealing, RTA)하여 전기 및 광학적 특성에 대하여 비교 분석하였다. 또한, 이후에 기존의 성장방법과 달리 고가의 진공 장비를 사용하지 않고, 저온에서도 간단한 구조의 장비를 이용하여 균일한 나노구조를 성장시킬 수 있는 전기화학증착법(electrochemical deposition)으로 AZO 박막위에 ZnO 나노로드를 다양한 성장조건에 따라 성장시켜 광학적 특성을 비교 분석하였다.

  • PDF

Resistive Switching Effects of Zinc Silicate for Nonvolatile Memory Applications

  • Im, Minho;Kim, Jisoo;Park, Kyoungwan;Sok, Junghyun
    • 한국전기전자재료학회논문지
    • /
    • 제35권4호
    • /
    • pp.348-352
    • /
    • 2022
  • Resistive switching behaviors of a co-sputtered zinc silicate thin film (ZnO and SiO2 targets) have been investigated. We fabricated an Ag/ZnSiOx/highly doped n-type Si substrate device by using an RF magnetron sputter system. X-ray diffraction pattern (XRD) indicated that the Zn2SiO4 was formed by a post annealing process. A unique morphology was observed by scanning electron microscope (SEM) and atomic force microscope (AFM). As a result of annealing process, 50 nm sized nano clusters were formed spontaneously in 200~300 nm sized grains. The device showed a unipolar resistive switching process. The average value of the ratio of the resistance change between the high resistance state (HRS) and the low resistance state (LRS) was about 106 when the readout voltage (0.5 V) was achieved. Resistance ratio is not degraded during 50 switching cycles. The conduction mechanisms were explained by using Ohmic conduction for the LRS and Schottky emission for the HRS.

에너지수확소자용 친환경 (Li0.04(Na0.56K0.44)0.96(Nb0.9Ta0.10)0.998Zn0.005O3 세라믹스의 유전 및 압전 특성 (Dielectric and Piezoelectric Properties of Environmantal Friendly(Li0.04(Na0.56K0.44)0.96(Nb0.9Ta0.10)0.998Zn0.005O3 Ceramics for Energy Harvesting Devices)

  • 신상훈;류주현
    • 한국전기전자재료학회논문지
    • /
    • 제26권5호
    • /
    • pp.355-359
    • /
    • 2013
  • In this paper, the $0.995(Li_{0.04}(Na_{0.56}K_{0.44})_{0.96}(Nb_{0.90}Ta_{0.10})_{0.998}Zn_{0.005}O_3+0.005KNbO_3+xwt%\;TeO_2$ lead-free piezoelectric ceramics for energy harvesting devices were fabricated by the conventional mixed oxide method. The microstructure, dielectric, and piezoelectric properties were investigated as a function of the $TeO_2$ addition. All the specimens showed an orthorhombic phase structure. At the composition ceramics doped with 0.1 wt%$TeO_2$, the optimum values of $d_{33}$= 212 pC/N, $d_{33}{\cdot}g_{33}=9.54pm^2/N$, and kp=0.448 were obtained, respectively. The results indicate that the composition ceramics is a promising candidate for energy harvesting devices applications.

Photoluminescence of the Mn-doped ZnGa₂O₄ Phosphors Prepared by Coprecipitation of Metal Salts

  • 고중곤;박희동;김동표
    • Bulletin of the Korean Chemical Society
    • /
    • 제20권9호
    • /
    • pp.1035-1039
    • /
    • 1999
  • Manganese-activated zincgallate (Zn1-xMnxGa2O4) phosphor as a green phosphor was readily prepared by coprecipitation in aqueous basic solution of metal salts. The obtained product converted to amorphous zincgallate even at 300℃, followed by crystallization at 1000 ℃. The pyrolyzed phosphor showed fine particle, then reduction treatment at 900 ℃ changed into homogeneous shape with slight grain growth(particle size less than 0.5 mm). The photoluminescence characteristics of the zincgallates have been investigated as a function of dopant concentrations, reducing atmospheres and temperatures. Under UV excitation the phosphors displayed the highest green emission efficiency at 504 nm when the specimen oxidized at 1000 ℃ was reduced at 900 ℃ in a mild hydrogen atmosphere (97% N2, 3% H2) with a flow rate of 100 ml/min.

RF 마그네트론 스퍼터링 법으로 유리 기판 위에 성장 시킨 Ga 도핑된 ZnO 박막의 열처리에 따른 구조적, 광학적 특성 평가 (Structural and optical properties of heat-treated Ga doped ZnO thin films grown on glass substrate by RF magnetron sputtering)

  • 이지수;김금채;전훈하;황보수정;김도현;성창모;전민현
    • 한국진공학회지
    • /
    • 제17권1호
    • /
    • pp.23-27
    • /
    • 2008
  • 본 연구에서는 상온에서 RF 마그네트론 스퍼터링 법으로 유리 기판위에 증착된 Ga 도핑 된 다결정 ZnO 박막의 특성을 개선하기 위하여 적정 열처리 조건을 분석하였다. 먼저 박막 성장 후 박막의 특성을 분석하였고 각각 $400{\sim}600^{\circ}C$에서 30분, 60분간 질소 분위기에서 열처리를 한 후 구조적, 광학적 특성을 평가하였다. XRD와 FE-SEM을 사용하여 열처리온도 변화에 따른 결정입자의 크기의 변화를 관찰하였다. 그 결과 성장된 결정의 크기의 증가와 박막의 결정성이 향상되었음을 확인할 수 있었으며 그로 인해 박막 특성을 중시하는 투명 전도막의 투과도의 향상 또한 확인할 수 있었다. 결론적으로, 본 실험을 통하여 ZnO 성장 후 적절한 열처리를 수행함으로서 GZO 박막을 사용하여 제작된 소자의 특성을 개선할 수 있으리라 판단된다.

$Zn_{4}SnSe_{6}$$Zn_{4}SnSe_{6}:Co^{2+}$ 단결정에서 광학적 에너지 띠 및 열역학적 함수의 온도의존성 연구 (Temperature dependence of optical energy gaps and thermodynamic function of $Zn_{4}SnSe_{6}$ and $Zn_{4}SnSe_{6}:Co^{2+}$ single crystals)

  • 김덕태;김남오;최영일;김병철;김형곤;현승철;김병인;송찬일
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2002년도 제4회 영호남학술대회 논문집
    • /
    • pp.25-30
    • /
    • 2002
  • The ternary semiconducting compounds of the $A_{4}BX_{6}$(A=Cd, Zn, Hg; B=Si, Sn, Ge; X=S, Se, Te) type exhibit strong fluorescence and high photosensitivity in the visible and near infrared ranges, so these are supposed to be materials applicable to photoelectrical devices. These materials were synthesized and single crystals were first grown by Nitsche, who identified the crystal structure of the single crystals. In this paper. author describe the undoped and $Co^{2+}$-doped $Zn_{4}SnSe_{6}$ single crystals were grown by the chemical transport reaction(CTR) method using iodine of $6mg/cm^{3}$ as a transport agent. For the crystal. growth, the temperature gradient of the CTR furnace was kep at $700^{\circ}C$ for the source aone and at $820^{\circ}C$ for the growth zone for 7-days. It was found from the analysis of x-ray diffraction that undoped and $Co^{2+}$-doped $Zn_{4}SnSe_{6}$ compounds have a monoclinic structure. The optical absorption spectra obtained near the fundamental absorption edge showed that these compounds have a direct energy gaps. These temperature dependence of the optical energy gap were closely investigated over the temperature range 10[K]~300[K]

  • PDF