• Environmental Engineering Research
• /
• 제13권4호
• /
• pp.171-176
• /
• 2008

Studies on visible-light-driven photocatalysis of air pollutants at indoor air quality (IAQ) levels have been limited. Current study investigated visible-light derived photocatalysis with N-doped and S-doped titanium dioxide ($TiO_2$) for the control of benzene at indoor levels. Two preparation processes were employed for each of the two types of photocatalyst: urea-Degussa P-25 $TiO_2$ and titania-colloid methods for the N-doped $TiO_2$; and titanium isopropoxid- and tetraisopropoxide-thiourea methods for the S-doped $TiO_2$. Furthermore, two coating methods (EDTA- and acetylacetone-dissolving methods) were tested for both the N-doped and S-doped $TiO_2$. The two coating methods exhibited different photocatalytic degradation efficiency for the N-doped photocatalysts, whereas they did not exhibit any difference for the S-doped photocatalysts. In addition, the two doping processes showed different photocatalytic degradation efficiency for both the S-doped and N-doped photocatalysts. For both the N-doped and S-doped $TiO_2$, the photocatalytic oxidation (PCO) efficiency increased as the hydraulic diameter (HD) decreased. The degradation efficiency determined via a PCO system with visible-light induced $TiO_2$ was lower than that with UV-light induced unmodified $TiO_2$, which was obtained from previous studies. Nevertheless, it is noteworthy that for the photocatalytic annular reactor with the HD of 0.5 cm, PCO efficiency increased up to 52% for the N-doped $TiO_2$ and 60% for the S-doped $TiO_2$. Consequently, when combined with the advantage of visible light use over UV light use, it is suggested that with appropriate HD conditions, the visible-light-assisted photocatalytic systems can also become an important tool for improving IAQ.

• Bulletin of the Korean Chemical Society
• /
• 제33권4호
• /
• pp.1269-1274
• /
• 2012

A visible light responsive N, Mo co-doped $TiO_2$ were prepared by sol-gel method. X-ray diffraction, TEM, $N_2$ adsorption, UV-vis spectroscopy, photoluminescence, and X-ray photoelectron spectroscopy were used to characterize the prepared $TiO_2$ samples. Doping restrained the phase transformation from anatase to rutile and reduced the particle sizes. The band gap was much narrowed after N, Mo co-doping. The photocatalytic activities were tested in the degradation of an aqueous solution of a reactive dyestuff, methylene blue, under visible light. The photocatalytic activities of doped $TiO_2$ were much higher than that of neat $TiO_2$. The photocatalytic stability of N, Mo co-doped $TiO_2$ was much better than that of N doped $TiO_2$.

• Bulletin of the Korean Chemical Society
• /
• 제31권4호
• /
• pp.925-928
• /
• 2010

Nitrogen-doped $TiO_2$ ($TiO_2$:N) nano-particles with a pure anatase crystalline structure were successfully synthesized through the hydrolysis of $TiCl_4$ in an ammonia aqueous solution. The samples were characterized using X-ray diffraction (XRD), transmission electron microscopy (TEM), $N_2$-sorption, and UV-vis diffuse reflectance spectra (UV-vis DRS) techniques. The absorption edge of nitrogen-doped $TiO_2$ shifted into the visible wavelength region. The photoelectrochemical (PEC) performances were investigated for the $TiO_2$ mesoporous electrodes doped with different nitrogen concentrations. The $TiO_2$:N electrodes exhibited much higher PEC responses compared to the pure $TiO_2$ electrode because of the significantly enhanced visible-photoresponsibility of the $TiO_2$:N electrodes.

• 산업기술연구
• /
• 제31권B호
• /
• pp.119-125
• /
• 2011

N-doped Titanium oxides were prepared by using urea as a source of nitrogen. The photoactivities of the doped $TiO_2$ were evaluated on the basis of degradation of humic acid in aqueous solutions with different light sources, ultraviolet lamp, fluorescent lamp and solar light. XRD analysis was conducted to identify the crystal structure of the synthesized photocatalysts. N-doped $TiO_2$ and $pure-TiO_2$ was anatase type. SEM results showed that spherical particles were formed, which are the characteristics of the anatase form. N doped $TiO_2$ showed higher $UV_{254}$ decrease ratio and DOC removal ratio compared to $pure-TiO_2$. The humic acid degradation reaction using the UV-A lamp and UV-C lamp was assigned to pseudo-first order reaction. For solar light, only $pure-TiO_2$ and $N-TiO_2$ exhibited the pseudo-first order reaction.

• 한국분말재료학회지
• /
• 제24권6호
• /
• pp.477-482
• /
• 2017

Nitrogen-doped titanium dioxide (N-doped $TiO_2$) is attracting continuously increasing attention as a material for environmental photocatalysis. The N-atoms can occupy both interstitial and substitutional positions in the solid, with some evidence of a preference for interstitial sites. In this study, N-doped $TiO_2$ is prepared by the sol-gel method using $NH_4OH$ and $NH_4Cl$ as N ion doping agents, and the physical and photocatalytic properties with changes in the synthesis temperature and amount of agent are analyzed. The photocatalytic activities of the N-doped $TiO_2$ samples are evaluated based on the decomposition of methylene blue (MB) under visible-light irradiation. The addition of 5 wt% $NH_4Cl$ produces the best physical properties. As per the UV-vis analysis results, the N-doped $TiO_2$ exhibits a higher visible-light activity than the undoped $TiO_2$. The wavelength of the N-doped $TiO_2$ shifts to the visible-light region up to 412 nm. In addition, this sample shows MB removal of approximately 81%, with the whiteness increasing to +97 when the synthesis temperature is $600^{\circ}C$. The coloration and phase structure of the N-doped $TiO_2$ are characterized in detail using UV-vis, CIE Lab color parameter measurements, and powder X-ray diffraction (XRD).

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2011년도 춘계학술발표대회
• /
• pp.31.2-31.2
• /
• 2011

We have investigated frequency dependant conductivity (or permittivity) of low dimensional oxide structures represented by [($Sr_{0.75}$, $La_{0.25}$)$TiO_3$]$_1$/1$[SrTiO_3]_n$ superlattices. The low dimensional oxide superlattice was made by cumulative stacking of one unit cell thick La doped $SrTiO_3$ and $SrTiO_3$ with variable thickness from 1 to 6 unit cell, i,e, [($Sr_{0.75}$, $La_{0.25}$)$TiO_3$]$_1$/$[SrTiO_3]_n$ (n=1, 2, 3, 4, 5, 6). We found two kinds of relaxation when n is 3 and 4, while, inductance component was observed at n=1. This behavior can be explained by electron modulation in ($Sr_{0.75}$, $La_{0.25}$)$TiO_3/SrTiO_3$ superlattices. When n is 1, electrons by La doping well extend to un-doped layer. Therefore, the transport of superlattices follows bulk-like behavior. On the other hand, as n increased, the doped electrons became two types of carrier: one localized and the other extended. These results in two kinds of transport phase. At further increase of n, most of doped electrons are localized at the doped layer. This result shows that dimensionality of the oxide structure significantly affect the transport of oxide nanostructures.

• 공업화학
• /
• 제23권3호
• /
• pp.308-312
• /
• 2012

암모니아를 이용하여 질소가 도핑된 광촉매를 제조하고 이에 따른 가시광 광촉매 활성효과를 알아보았다. 질소 도핑된 $TiO_2$ 광촉매가 태양광영역에서 분해되는 정도를 확인하기 위해서 태양광에 조사하에 메틸렌블루 염료분해 실험을 수행하였다. SEM 이미지 분석결과 질소가 도핑된 $TiO_2$ 광촉매의 응집 입자가 감소함을 알 수 있었고, XRD 결과 $600^{\circ}C$에서 열처리된 질소 도핑 $TiO_2$ 광촉매는 아나타제 구조와 루타일이 존재하고 있음을 알 수 있었다. 또한, X선 광전자 분광기 분석을 통하여 암모니아 반응시간에 따라서 $TiO_2$ 광촉매에 N의 조성 증가를 알 수 있었다. $TiO_2$ 광촉매의 질소 도핑에 의하여 메틸렌블루에 대한 광분해 효과가 도핑되지 않은 시료에 비해 증가하였다. 또한 질소 도핑은 $TiO_2$ 광촉매의 결정에도 영향을 주었다.

• 한국입자에어로졸학회지
• /
• 제6권4호
• /
• pp.165-172
• /
• 2010

Titania is widely used as an effective photocatalyst for the photodegradation of environmental pollutants in air. In this study, novel N-doped $ZrO_2/TiO_2$ photocatalysts were synthesized via sol-gel method and characterized by UV-Vis spectrophotometer, transmission electron microscope, and X-ray diffractometer. N-doped $ZrO_2/TiO_2$ photocatalysts were nano-sized with an average particle size of about 20 nm. The XRD pattern of N-doped $ZrO_2/TiO_2$ photocatalysts showed both anatase and rutile phases. The photocatalytic activity of N-doped $ZrO_2/TiO_2$ photocatalysts was evaluated by degradation of NO under UV and visible light irradiation at various parameters such as amount of photocatalyst, concentration of NO, and intensity of light. The photocatalytic activity of N-doped $ZrO_2/TiO_2$ photocatalysts was effective for the enhancement of the degradation of NO and higher than that of $TiO_2$ photocatlysts under UV and visible light irradiation.

• 공업화학
• /
• 제29권3호
• /
• pp.298-302
• /
• 2018

질소가 도핑된 이산화티타늄의 광촉매 특성을 알아보았다. 질소가 도핑된 이산화티타늄에 대하여 자외선 및 가시광선 분위기에서 메틸렌블루 광촉매 분해를 수행하였다. XPS 분석을 통해 제조한 $TiO_2$에서 질소(N)가 산소(O)와 치환되었음을 확인하였다. UV-Vis DRS 분석 결과 질소가 도핑된 무정형 $TiO_2$ 시료에서는 가시광선을 거의 흡수하지 않고 자외선을 흡수하는 반면 무정형/anatase 혼재 $TiO_2$ 시료의 경우 가시광선 흡수가 상당히 증가하였다. 질소가 도핑된 anatase $TiO_2$ 시료는 자외선 및 가시광선 조사에서 메틸렌블루 광분해 반응이 나타났다. 그러나 가시광선 조사에서 분해율은 자외선 조사의 분해율보다 낮았다. 무정형/anatase 혼재 $TiO_2$ 시료의 경우 자외선과 가시광선 조사에서 anatase $TiO_2$ 시료의 분해율보다 높았다. 이러한 결과는 anatase $TiO_2$ 시료에 비해 3배 정도 큰 무정형/anatase 혼재 $TiO_2$ 시료의 높은 표면적이 질소 도핑된 작은 anatase 입자와 관련이 있음을 보여준다.

• Bulletin of the Korean Chemical Society
• /
• 제33권1호
• /
• pp.199-203
• /
• 2012

A modified sol-gel method and $N_2$-plasma treatment were used to prepare bulk and surface doped N-$TiO_2$, respectively. XRD, TEM, UV-vis spectroscopy, $N_2$ adsorption, Elemental Analyzer, Photoluminescence, and XP spectra were used to characterize the prepared $TiO_2$ samples. The N doping did not change the phase composition and particle sizes of $TiO_2$ samples, but increased the visible light absorption. The photocatalytic activities were tested in the degradation of an aqueous solution of a reactive dyestuff, methylene blue, under visible light. The photocatalytic activity of surface doped N-$TiO_2$ prepared by $N_2$-plasma was much higher than that of bulk doped N-$TiO_2$ prepared by sol-gel method. The possible mechanism for the photocatalysis was proposed.