• Journal of the Korean Society of Food Science and Nutrition
• /
• v.26 no.3
• /
• pp.422-429
• /
• 1997

For the complete and accurate amino acid determination of protein and food samples, 3 different hydrolysis procedures have been conducted in parallel for each sample, which include the alkaline hydrolysis for tryptophan determination, performic acid oxidation prior to the acid hydrolysis for the determination of cysteine and cystine, and the 6N HCl hydrolysis for the determination of the rest of amino acids. In the present study, amino acid concentrations obtained from the modified single hydrolysis procedure were compared with the values from the conventional hydrolysis procedures in casein and nine food and composite dish samples. In most of the samples tested, the modified single hydrolysis procedure gave significantly higher values of cysteins and cystein compared to the performic acid oxidation method, but resulted in a considerable destruction of tryptophan in food and composited dish samples. There was no consistent difference in the rest of amino acid concentrations between the two hydrolysis systems. Therefore, for complete amino acid determination of various foods and composite dishes, the single hydrolysis method may replace the 6N HCl hydrolysis and performic acid oxidation methods, and thereby reduces 3 hydrolyses to 2 steps with much higher recoveries of the sulfur containing amino acids.

• Korean Journal of Environmental Agriculture
• /
• v.24 no.3
• /
• pp.295-302
• /
• 2005

The nitrogen (N) balance in Korea during 1985-1997 was calculated according to the surface balance method of the PARCOM guidelines and compared with Japanese N balance. The some differences were founded in the coefficients used on calculating N balance in two nations. Of the important parameters, which can make a big difference in balance, N input by organic fertilizers was not included in Korea different with Japanese, due to absence of reliable statistics and then made lower the input. Nitrogen destruction rate from livestock manure was adjusted differently with 15% in Korea but 28% in Japan. There was some difference in the conversion factors of livestock number into manure N quantity in two nations, but the gap was ignoble scale except beef cattle. Our manure N production rate of beef cattle might be evaluated to be so lower than Japanese. Biological N fixation by pulses was very higher in Korea than in Japan but scarcely affect the increase of total N input, due to small cultivation area. In contrast, N fixation rate by free-living organisms in Korean and Japanese wet paddies showed the big difference with 7.6 and $37.0kg\;ha^{-1}\;yr^{-1}$, respectively, and therefore $29.4kg\;ha^{-1}\;yr^{-1}$ of nitrogen was estimated to be more inputted in Japan. Although there are many points to be more specified and improved, still, Korean N balance was very high with $250-257kg\;ha^{-1}$ in the mid of 1990s, which was the second highest level in OECD countries and furthermore increased continuously during the investigation. In contrast in Japan, which has similar fanning system with Korea, N balance was lower with $130-158kg\;ha^{-1}$ and has decreased continuously since 1993. This high N balance was mainly due to a high usage of chemical fertilizers in our intensive fanning system and the fast increment of livestock feeding. Therefore, the more active action to decrease chemical fertilizer utilization and reduce livestock feeding density is required in the government and farmer sides.

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.803-806
• /
• 1997

In this paper, a force estimation method is proposed for the sensorless force control. For this, a disturbance observer is applied to each joint of an n degrees of freedom manipulator to obtain a simple equivalent robot dynamics(SERD) being represented as an n independent double integrator system. To estimate the output of disturbance observer in the absence of external force, the observer estimator is designed, where the uncertain parameters of the robot manipulator are adjusted by gradient method to minimize the output between the disturbance observer and the observer estimator. When the external force is exerted, the external force is estimated using the difference between the output of disturbance observer which include the external torque signal and that of observer estimator. And then, a force controller is designed for force feedback control employing the estimated force signal. To verify the effectiveness of the proposed force estimation method, several numerical examples are illustrated for the 2-axis planar type robot manipulator.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.19 no.11
• /
• pp.2995-3002
• /
• 1995

The cooling problem of the hot internal pipe flow has been investigated. Simultaneous conduction, convection, and radiation were considered with azimuthally varying convective heat loss at the pipe wall. A complex, nonlinear integro-differential radiative transfer equation was solved by the discrete ordinates method (or called S$_{N}$ method). The energy equation was solved by control volume based finite difference technique. A parametric study was performed by varying the conduction-to-radiation parameter, optical thickness, and scattering albedo. The results have shown that initially the radiatively active medium could be more efficiently cooled down compared with the cases otherwise. But even for the case with dominant radiation, as the medium temperature was lowered, the contribution of conduction became to exceed that of radiation.n.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.21 no.2
• /
• pp.71-82
• /
• 1984

A programme, called BIPOLE, for the numerical analysis of twotimensional n-p-n bipolar transistors was developed. It has included the SRH and Auger recolnbination processes, the mobility dependence on the impurity density and the electric field, and the band-gap narrowing effect. The finite difference equations of the fundamental semiconductor equations are formulated using Newton's method for Poisson's equation and the divergence theorem for the hole and electron continuity equations without physical restrictions. The matrix of the linearized equations is sparse, symmetric M-matrix. For the solution of the linearized equations ICCG method and Gummel's algorithm have been employed. The programme BIPOLE has been applied to various kinds of the steady-state problems of n-p-n transistors. For the examples of applications the variations of common emitter current gain, emitter and diffusion capacitances, and input and output characteristics are calculated. Three-dimensional representations of some D.C. physical quantities such as potential and charge carrier distributions were displayed. This programme will be used for the nome,rical analysis of the distortion phenom ana of two-dimensional n-p-n transistors. The BIPOLE programme is available for everyone.

• Journal of Technologic Dentistry
• /
• v.33 no.1
• /
• pp.55-61
• /
• 2011

Purpose: In this study, FEM(Finite Element Method) and bending strength test was conducted using normal implant and porous implant for the mechanical estimation of porous dental implant made by SLM method. Methods: Mechanical characteristics of PI(porous implant) and NI(normal implant) applied distributed loads(200N, 500N) were observed through FEM analysis. And each bending strength was gotten through bending test using MTS(Mechanical Test System, Instron 8871). Results: The result of FEM analysis was observed that stress difference between upper and surface of PI was 12 times, while NI was 2 times. The result of bending test was observed that bending strength of PI was lower than NI. we made a decision about this result that cross-sectional area of NI was larger than the PI. Conclusion: The stress shielding ability of porous implant was better than normal implant through result of FEM analysis. And bending strength of porous implant was lower than NI. We think that cause of this result was difference of cross-sectional area.

• Physical Therapy Rehabilitation Science
• /
• v.11 no.4
• /
• pp.509-516
• /
• 2022

Objective: This study investigated the effect of a video game-based home exercise program on the improvement of balance and muscle strength in the elderly. Design: Randomized controlled trial Methods: Participants were randomly assigned to two groups: a video game-based home exercise training group (experimental group, n=16) and a control group (n=17). The experimental group trained three times a week for 50 minutes per session for six weeks, and the control group did not perform any exercise. To evaluate postural balance, one leg standing test, Berg balance scale, functional reach test, and timed up and go test were performed, and five times sit-to-stand was performed to evaluate lower extremity muscle strength. Results: In the experimental group, there were statistically significant improvements (p<0.05) in one leg standing test, Berg balance scale, functional reach test, and timed up and go test, and five times sit-to-stand after the intervention, but in the control group, the difference before and after the intervention was not significant. The difference between the groups according to the experimental method showed a significant increase in the experimental group (p<0.05). Conclusions: These results suggest that a video game-based home exercise program effectively improves balance and muscle strength in the elderly. A video game-based exercise program can contribute to the rehabilitation of the elderly as a method of home remote rehabilitation.

• Korean Journal of Materials Research
• /
• v.20 no.4
• /
• pp.187-193
• /
• 2010

Chromium nitride (CrN) samples with two different layer structures (multilayer and single layer) were coated on bipolar plates of polymer electrolyte membrane fuel cells (PEMFC) using the reactive sputtering method. The effects with respect to layer structure on corrosion resistance and overall cell performance were investigated. A continuous and thin chromium nitride layer ($Cr_{0.48}\;N_{0.52}$) was formed on the surface of the SUS 316L when the nitrogen flow rate was 10 sccm. The electrochemical stability of the coated layers was examined using the potentiodynamic and potentiostatic methods in the simulated corrosive circumstances of the PEMFC under $80^{\circ}C$. Interfacial contact resistance (ICR) between the CrN coated sample and the gas diffusion layer was measured by using Wang's method. A single cell performance test was also conducted. The test results showed that CrN coated SUS316L with multilayer structure had excellent corrosion resistance compared to single layer structures and single cell performance results with $25\;cm^2$ in effective area also showed the same tendency. The difference of the electrochemical properties between the single and multilayer samples was attributed to the Cr interlayer layer, which improved the corrosion resistance. Because the coating layer was damaged by pinholes, the Cr layer prevented the penetration of corrosive media into the substrate. Therefore, the CrN with a multilayer structure is an effective coating method to increase the corrosion resistance and to decrease the ICR for metallic bipolar plates in PEMFC.

• Journal of the Korean Society of Costume
• /
• v.65 no.7
• /
• pp.47-59
• /
• 2015

This paper studies the conservation treatment of Lady Shim's costume, which was excavated in Jecheon Province in 2012. There were the significant problems, which were encountered in the treatment of the costume ; First the Jeogoris were transformed during the excavation, Second fibers were seriously deteriorated, Third most of the fabrics such as Chusa were readily deformed. To overcome these problems and to secure stability in the conservation treatment, we decided to alternate between two different washing methods ; dry cleaning by n-hexane and wet cleaning by water. The costume shape was recovered by steaming and by swelling with Hanji(Korean traditional paper). The combined cleaning method proved to be relatively efficient and stable. In addition, the shape of Chusa was well preserved by dry cleaning.(using n-hexane also solved the problem of bad smell after washing with organic solvents.) The effects of the conservation treatment on the excavated costumes could be seen in the change of Lab color difference. Washing made the distribution of Lab color difference narrower, which may suggest that the impurities on the fiber was removed by washing. In addition, the value of L was greater than a-value and b-value after the treatment. This result indicates that the change of value represents the change of color difference by cleaning.

• Archives of Plastic Surgery
• /
• v.36 no.4
• /
• pp.365-371
• /
• 2009

Purpose: Good color match holds a key position in facial reconstruction for good aesthetic result. To correct the wide facial soft tissue defect were usually used the tissue expanded cheek flap, deltopectoral flap or radial forearm free flap. This study is aimed to analyse the color difference after flap surgery by using chromameter. Method: From August 1995 to December 2006, 30 patients underwent flap operations were chosen randomly and evaluated color differences between flap site and adjacent skin. Reconstructive procedures included tissue expanded cheek flap(n = 10), deltopectoral flap(n = 10), and radial forearm free flap(n = 10). The measured sites were flap center within a radius of 1 ㎝ and four points of adjacent skin along the flap margin. The color was quantified in a three dimensional coordinate system $L^*$ (brightness), $a^*$ (redness), $b^*$ (yellowness). Results: There was no significant color difference between the pedicled flaps(tissue expanded cheek flap and deltopectoral flap) and adjacent skin area. On the other hand, color values of the radial forearm free flap were statistically different from those of adjacent skin area. Total color difference(${\Delta}E$) of tissue expanded cheek flap and deltopectoral flap were $7.45{\pm}5.78$ versus $9.41{\pm}7.09$, and that of radial forearm free flap was $11.74{\pm}3.85$. They suggest that pedicled flaps have a potential of better color match than radial forearm free flap. Conclusion: Thus, better esthetic result and satisfaction is more likely to be expected in pedicled flaps as long as it could be applied comparing radial forearm free flap.