• 충청수학회지
• /
• 제3권1호
• /
• pp.41-48
• /
• 1990

Let D' : $C^n$[0, 1] ${\rightarrow}$ M be a second order derivation from the Banach algebra of n times continuously differentiable functions on [0, 1] into a Banach $C^n$[0, 1]-module M and let D be the primitive of D'. If D' is continuous and D'(z) lies in the 1-differential subspace, then it is completely determined by D(z) and D'(z) where z(t)=t, $0{\leq}t{\leq}1$.

• 한국방사선학회논문지
• /
• 제10권5호
• /
• pp.337-341
• /
• 2016

중성자에너지 영역 0.003 eV에서 10 eV에 대해 천연 Sm의 Sm(n,${\gamma}$) 반응에 대한 중성자 포획단면적을 측정하였다. 교토대학교 원자로실험소의 46-MeV 전자선형가속기에서 발생되는 전자의 광핵반응에 의한 중성자를 사용하였고 TOF 방법으로 측정하였다. 사용한 검출기는 12개의 BGO($Bi_4Ge_3O_{12}$) 섬광체로 구성되었고 이 검출장치로 Sm(n,${\gamma}$) 반응으로부터 나오는 즉발감마선을 측정하였다. 검출장치는 중성자 생성 위치로부터 $12.7{\pm}0.02m$ 위치에 설치되었으며 $^{10}B(n,{\alpha}{\gamma})^7Li$ 반응을 이용해 Sm 시료에 입사되는 중성자 선속을 구하였다. 또한 중성자 선속의 변화를 확인하기 위해 $BF_3$ 검출기로 모니터링 하였다. Sm(n,${\gamma}$) 반응단면적 측정결과는 BROND 2.2에 의한 평가결과와 J. C. Chou 및 V. N. Kononov 의 측정값과 비교하였다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집C
• /
• pp.59-63
• /
• 2001

A high-impulse, low-power, continuous-shot microthruster has been developed using low boiling temperature liquid-propellant with high viscous fluid-plug. The viscous friction force of the fluid-plug increases the blast pressure and the low boiling temperature liquid-propellant is intended to reduce input power consumption. The three-layer microthruster has been fabricated by surface micromachining as well as bulk micromachining in the size of $7{\times}13{\times}1.5mm^{3}$. A continuous output impulse bit of $6.4{\times}10^{-8}N{\cdot}sec$ has been obtained from the fabricated microthruster using perfluoro normal hexane (FC72) propellant and oil plug, resulting in about ten times increase of the impulse bit using one hundredth electrical input energy compared to the conventional continuous microthruster.

• 한국농공학회지
• /
• 제42권
• /
• pp.61-67
• /
• 2000

Composting of hog manure amended with sawdust trials lasted three weeks and used pilot-scale in bin composting system. Results showed that the rise temperature and carbon dioxide evolution in compost during the composting decomposition process were affected by the aeration method, pH, C/N, moisture content, bulk density and particle size distribution. No significant differences existed in biophysical properties of the composit produced from the continuous and intermittent aeration method. The intermittent aeration was very successful in compost odor control and required less time to reach stability than the continuous aeration.

• 응용화학
• /
• 제16권1호
• /
• pp.25-28
• /
• 2012

A determination method of cyanide ion (CN^-) using nickel complexation reaction by continuous monitoring system. The mechanical parameters and chemical conditions of the complexation reaction were investigated prior to application of continuous monitoring system for determination of cyanide. On the optimized conditions, the calibration curve was linear over the range from 5.0×10^-6 to 1.0×10^-4 M. In this range, 2.40% of the reproducibility (RSD, n=3) was obtained. The limit of detection (3σ/s) was calculated to be 1.8×10^-6 M.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 추계학술대회 논문집
• /
• pp.352-364
• /
• 2007

It is essential to reduce track maintenance costs and to extend the periodic replacements of continuous welded rails based on accumulated passing tonnage. As recently train load decrease and rail joints wear down less, the periodic replacements of continuous welded rails can be extended. There are many kinds of rail damage like squat, head-check and corrugation. These can be taken nondestructive or naked eye test. So the periodic replacements of continuous welded rails based on accumulated passing tonnage were examine with focusing on a crack of rail bottom of continuous welded rail. Therefore, this study measure dynamic response of track by metro train load, it compute impact coefficient and track spring coefficient for estimating a condition of actual track system. Also, it is converted the measured stress waveform into stress frequency histogram by the rain-flow counting methods, and then the equivalence of stress is calculated. As apply s-n curve of a new welded rail, accumulated fatigue damage ratio of laid rail and remaining service lives is estimated. This study suggest a plan of the periodic replacements of continuous welded rails based on accumulated passing tonnage classified by the types of track system.

• 한국구조물진단유지관리공학회 논문집
• /
• 제5권2호
• /
• pp.163-174
• /
• 2001

This paper is to study the characteristics of axial force behavior that operates to the part of turnout when it makes the turnout and the continuous welded rail unifying. The study is to model by using the 50kgN rail No. 15 turnout used in the domestic national railway and the UIC60 rail No. 18 turnout used in the rapid transit railway as the finite elements for analyzing the axial force behavior of the turnout by the continuous welded rail. It is to analyze the characteristics of behavior according to the change of creep resistance, ballast resistance and the change of parameter valuables of heel joint by the axial force simulation in making the continuous welded rail and then, it is to present the result. As the result of research on the parameter valuables through the analysis, it shows that the maximum axial force of turnout by the continuous welded rail are largely subordinated to the maximum resistance of heel joint and the fitting devices than the ballast resistance. Also it shows that the maximum axial force produced changes a lot according to the characteristics of creep resistance of the fitting part and the ballast resistance.

• Journal of Chest Surgery
• /
• 제27권7호
• /
• pp.581-586
• /
• 1994

From February 1985 to February 1993, 18 operations were performed in 17 patients for treatment of aneurysmal disease [n=12] and/or dissection of the ascending aorta [n=6]. The ages ranged from 26 to 69 years [mean 44.3 $\pm$ 11.0 years].The proposed operations include composite graft replacement of aortic valve and ascending aorta with coronary reimplantation in 11, graft replacement of ascending aorta alone in 5, aortic valve replacement and supracoronary graft replacement in 1 and ascending aorta to abdominal aorta bypass with thromboexclusion of descending aorta in one patient. Both Bentall [n=6] and Cabrol [n=5] technique were utilized for reimplantation of coronary arteries.Concomitant replacement of aortic arch and arch vessel reconstruction was necessary in two patients. Hypothermic circulatory arrest was utilized in 6 patients. Recently, four patients were managed on warm blood continuous cardioplegia via retrograde route. There were no operative deaths. No significant postoperative complications were noted. Postoperative follow up was complete in 15 patients from 1 month to 72 months. Redo operation was necessary in one patient who had suffered from distal recurrence of dissection 5 years after successful Bentall operation. The other patients are all in excellent clinical condition. From our early experience with those 17 cases, we assume that satisfactory operative result could be achieved with a variety of surgical technique including hypothermic circulatory arrest. In addition, continuous perfusion of warm blood cardioplegia via retrograde route is supposed to be beneficial in selected cases.

• Journal of applied mathematics & informatics
• /
• 제36권3_4호
• /
• pp.173-179
• /
• 2018

In this paper, we investigate the stability of positive weak solution for the singular p-Laplacian nonlinear system $-div[{\mid}x{\mid}^{-ap}{\mid}{\nabla}u{\mid}^{p-2}{\nabla}u]+m(x){\mid}u{\mid}^{p-2}u={\lambda}{\mid}x{\mid}^{-(a+1)p+c}b(x)f(u)$ in ${\Omega}$, Bu = 0 on ${\partial}{\Omega}$, where ${\Omega}{\subset}R^n$ is a bounded domain with smooth boundary $Bu={\delta}h(x)u+(1-{\delta})\frac{{\partial}u}{{\partial}n}$ where ${\delta}{\in}[0,1]$, $h:{\partial}{\Omega}{\rightarrow}R^+$ with h = 1 when ${\delta}=1$, $0{\in}{\Omega}$, 1 < p < n, 0 ${\leq}$ a < ${\frac{n-p}{p}}$, m(x) is a weight function, the continuous function $b(x):{\Omega}{\rightarrow}R$ satisfies either b(x) > 0 or b(x) < 0 for all $x{\in}{\Omega}$, ${\lambda}$ is a positive parameter and $f:[0,{\infty}){\rightarrow}R$ is a continuous function. We provide a simple proof to establish that every positive solution is unstable under certain conditions.

• 한국염색가공학회지
• /
• 제12권1호
• /
• pp.68-75
• /
• 2000

In this study, polyester DTY faille(yoryu) and N/NP microfiber fabrics were pretreated (desizing, scouring and shrinking) by Continuous Scouring and Shringking Equipment with rota-drum and conveyor type in which types were different with retaining method. The results were as follows. The shrinkage ratio of wp/wf direction of DTY fabrics scoured by conveyor type was 1.5/23% higher than those by rota-drum type at $97^\circ{C}$ with 10min. treatment. In this case, The shrinkage ratio of wp/wf direction by those types was about 15/27%, respectively. The shrinkage ratio of wp/wf direction of N/NP microfiber fabrics scoured by conveyor type was 1.5/23% higher than that by rota-drum type at $97^\circ{C}$ with 10min. treatment. The size add-on of DTY fabrics scoured at $97^\circ{C}$ with 10min. treatment by conveyor type and by rota-drum type were 0.15% and 0.42%, respectively. The size add-on of DTY fabric treated by rota-drum type decreased until 9min. of treated time, but increased after 9min. The size add-on of N/NP microfiber fabrics treated by conveyor type was decreased by increasing temperature and treated time, while the size add-on of that treated by rota-drum type was decreased until 6min. treated time and increased after 6min. The size add-on of N/NP microfiber fabrics treated by conveyor type at $97^\circ{C}$ for 10min. was 0.3% lower than that by rota-drum type.