• YAKHAK HOEJI
• /
• v.28 no.1
• /
• pp.11-16
• /
• 1984

As main index of petroleum pollution in the marine organisms n-, iso-paraffins were purified with clean-up method and measured by FID-GC. Ten species of fishes from the near seas of Korea were employed for the study. n-Heptadecane was detected in most fishes. n-Hexadecane and n-octadecane of n-paraffins were highly accumulated in four species of fishes(Seriola quinqueradiata, Sardinia melamosticta, Clupanodon punctatus and Stromateoids argentus), also n-tetradecane and n-hexadecane accumulated in Cololadis saira. Remarkable peak pattern of n-paraffins was not observed in other fishes. Pristane of iso-paraffins was detected in four species of fishes (Sardinia melamosticta, Clupanodon punctatus, Stromateoides orgentus and Cololadis saira).

• Microbiology and Biotechnology Letters
• /
• v.6 no.4
• /
• pp.173-179
• /
• 1978

1) To study the productivity of single cell protein from the n-paraffin utilizing yeast, 235 yeast strains were isolatea from 90 samples 2) Optimum cell growth temperature of three strains selected was 40~45$^{\circ}C$ and these were identified as Candida tropicalis, Candida krusei and Torulopsis molischiana. 3) A-28 strain easily assimilated tetradecane, hexadecane and octadecane, but B-8 strain and C-15 strain assimilated more hexadecane than other n-paraffins. 4) Out of the selected three strains, the mass doubling time, specific growth rate and cell yield were 3.4~4.0 hours, 0.170~0.215, 86~98%, respectively. 5) Crude protein, fat, fiber, ash and nitrogen free extract of the selected three strains were found to be 48.2~61.2% 3.7~8.0%, 3.5~4.2%, 5.6~6.7%, 23.5~31.8%, respectively, and thiamine and riboflavin contents of dried yeast cell were 0.78~0.93 mg% and 6.03~7.3 mg%, respectively. 6) Yeast protein contained evenly most of amino acid, but the sulfur-containing amino acids were particularly low.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.06a
• /
• pp.753-756
• /
• 2009

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2002.10b
• /
• pp.83-84
• /
• 2002

For estimation of chain-matching phenomena between normal paraffin as a solvent and straight-chain fatty acid as an additive, the density measurement of n-dodecane, n-tetradecane and n-hexadecane were carried out at oil temperature 313K and pressure up to 1.3 GPa. Their solidification pressure were easily determined by the appearance of molecular crystal, abrupt volumetric contraction and generation of heat of solidification and showed minima under the matching condition. The bulk modulus K of molecular crystal was evaluated using phase diagram. The bulk modulus showed maxima under the each matching condition. The chain matching effect on the bulk modulus beyond the scope of the interfacial phenomena are confirmed.

• Applied Biological Chemistry
• /
• v.50 no.1
• /
• pp.12-17
• /
• 2007

A biosurfactant-producing strain, Bacillus subtilis TBM 3101 was isolated from the soil sample at Tae-Baek Mountain through an antifungal test and emulsification assessment. The strain was assessed, regarding to the microbial growth, by physical and chemical test, surface tension, emulsification activity and stability. The surface tension of the isolate sharply decreased to the minimum 29mN/m at 48 h growth. Of note, its emulsification was stabilized to the highest degree when tributyrin was utilized as a substrate, indicating that in comparison to a variety of synthetic surfactants, the biosurfactant produced by the isolate was significantly similar to synthetic surfactant, tween 20. In addition, the biosurfactant showed high emulsification activity when soybean oil, crude oil and tetradecane were used as a substrate. Thus, these studies could contribute to the detection and development of biosurfactant beneficial to the environment and humans.

• Clean Technology
• /
• v.29 no.4
• /
• pp.279-287
• /
• 2023

Fine dust emitted from coal combustion is classified into filterable particulate matter (FPM) and condensable particulate matter (CPM). CPM is difficult to control with existing air pollution control devices, so research is being conducted to understand the characteristics of CPM. Components constituting condensable particulate matter (CPM) are divided into inorganic and organic components. There are many quantitative analysis results for the ionic components, which account for a significant proportion of the CPM inorganic components, but little is known about the organic components. Thus, there is a need for a quantitative analysis of CPM organic components. In this study, aromatic hydrocarbons (toluene, ethyl benzene, m,p-xylene, and o-xylene) and n-alkanes with 10 to 30 carbon atoms were quantitatively analyzed to understand the organic components of CPM emitted from a lab-scale coal combustor. Of the aromatic hydrocarbons, toluene accounted for 1.03% of the CPM organic components. On the other hand, the contents of ethyl benzene, m,p-xylene, and o-xylene showed low values of 0.11%, 0.18%, and 0.51% on average, respectively. Among the n-alkanes, triacontane (C₃₀) showed a high content of 2.64% and decane (C₁₀) showed a content of 2.05%. The next highest contents were shown with dodecane (C₁₂), tetradecane (C₁₄), and heptacosane (C₂₇), all of which were higher than that of toluene. The n-alkane substances that had detectable concentrations showed higher contents than ethyl benzene, m,p-xylene, and o-xylene except for tetracosane (C₂₄).

• Journal of Soil and Groundwater Environment
• /
• v.17 no.2
• /
• pp.7-14
• /
• 2012

Batch tests were carried out to evaluate the thermal treatment of low volatile organic compounds in low-permeability soil. The chemical oxidation by sodium persulfate catalyzed by heat and Fe (II) was evaluated. Enhanced persulfate oxidation of n-decane (C-10), n-dodecane (C-12), n-tetradecane (C-14), n-hexadecane (C-16), and phenanthrene was observed with thermal catalyst, indicating increased sulfate radical production. Slight enhancement of the pollutants oxidation was observed when initial sodium persulfate concentration increased from 5 to 50 g/L. However, the removal efficiency greatly decreased as soil/water ratio increased. It indicates that mass transfer of the pollutants as well as the contact between the pollutants and sulfate radical were inhibited in the presence of solids. In addition, more pollutants can be adsorbed on soil particles and soil oxidant demand increased when soil/water ratio becomes higher. The oxidation of the pollutants was significantly improved when catalyzed by Fe(II). The sodium persulfate consumption increased at the same time because the residual Fe(II) acts as the sulfate radical scavenger.

• Archives of Pharmacal Research
• /
• v.27 no.10
• /
• pp.1020-1022
• /
• 2004

A new ceramide alomacrorrhiza A was isolated from the ethanolic extract of the plant Alocasia macrorrhiza (L.) Schott. Its chemical structure was elucidated as (2S,3S,4R)-2N-[(2'R)-2'- hydroxy-hexacosanoyl]-tetradecane-1,3,4-triol based on extensive 1D, 2D NMR, EI-MS, FABMS, HR-FAB-MS spectroscopic data and chemical degradation studies.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.37 no.10
• /
• pp.1271-1277
• /
• 2008

Competitive displacement of methylcellulose (MC) absorbed at the oil-water interface was investigated by interfacial composition, surface shear viscosity, or surface tension measurements. It was found that all emulsifiers could competitively displace the interfacial MC from the oil-water interface but their behaviors were different from each other. With Tween 20 added to MC emulsion (1 wt% MC, 10 wt% n-tetradecane, 20 mM bis-tris, pH 7), MC load was steadily decreased with increasing concentrations of the emulsifier, as confirmed by surface shear viscosity measurements; moreover, there was complete MC displacement from the emulsion droplet surface at high concentration (0.1 wt%). The oil-soluble Span 80 was found to show a synergism with MC at the interface, which resulted in higher MC load at relatively low emulsifier concentrations ($\leq$0.05 wt%). At a higher emulsifier concentration (0.1 wt%) limited MC displacement was observed. These results were well supported by surface shear viscosity measurements. With water-soluble SDS, MC load was decreased with increasing concentrations of the emulsifier. Unlike Tween 20, however, it was found that at high concentrations (> 0.1 wt%), there was still some MC remaining at the droplet surface. Surface tension measurements are suggestive of an interfacial complex between MC and SDS.

• Journal of Life Science
• /
• v.9 no.2
• /
• pp.76-81
• /
• 1999

216 microorganisms which able to degrade wasted lubricant were isolated in the region of contaminated with wated lubricant such automobile repair shops, garages and gas stations in Taejon. Most activated strain among them is selected and used in this research. The microorganism in identified as Acinetobacter lwoffii 16C-1, which shows active growth and hydrocargon utilization withnormal alkane such as tetradecane, hexadecane and octadecane, and do not grow aromatic hydrocargons, cycloalkane, and branched alkane. In addition, A. lwoffii 16C-1 has resistance to heavy metals such as Ba, Li, Cr, and Mn more than 6.4mg/ml, and showed negligible tolerance against antibiotics. Effects of environmental conditions including concentration of wasted lubricnt, pH, NaCl concentration, nitrogen source and phosphate on microorganism growth and emulsification were studied. 2% of wasted lubricant, pH 7.0, 0-1% of NaCl, 0.2% of peptone, and 0.01% of K2HPO4 is turn out to be optimum condition. By the analysis of remaining oils, almost of hydrocarbons added to the media are removed by A. lwoffii 16C-1 at 30$^{\circ}C$ after 2 days of culture, which showed excellent oil degradation characteristics.