• 한국초지조사료학회지
• /
• 제10권2호
• /
• pp.102-109
• /
• 1990

This experiment was carried out to study the effect of pure mineral nitrogen fertilizing on dry matter yield of grassland and the advisable mineral nitrogen amounts in long duration under practical conditions at the "Federal Institute for Agriculture in the Alps" in Austria. The application rates were 0, 30, 60,90 and 120 kg N/ha/cut, the cutting regimes 3-, 4-, 5- and 6-cuts/year. In order to explain the nitrogen-profitability were determined that 1 kg pure mineral nitrogen have to produce 8 - 16 kg DM/kg N in dependence on cutting regimes and requiring of nitrogen efficiencies. The results were as follows: 1. With only PK-fertilizaing average dry matter yields from 4.0 to 7.6 tons per ha and year were obtained. 2. Within all applied cutting regimes 60 kg min. Nlhalgrowth have proved to be the most efficient application rate witn 13 - 24 kg DM/kg N in dependent of cutting regimes. Comapred with only PK-treatment the DM yields increased by 3.9 - 4.7 t/ ha nad year. 3. By the sigmaformed process of Input-Output curve the highest marginal yield (the "most efficient" Ndressing rate) per ha and year was calculated: 152 kg N at 3-cut regimes, 204 kg N at 4-cut regimes, 220 kg N at 5-cut regimes and 240 kg N/ha/year at 6-cut regimes. 4. With required efficiencies of 16 and 12 kg DM/kg N 240 - 300 kg N per ha and year respectively would have to be applied at 3-cut regimes; with required efficiencies of 12 and 10 kg DM/kg N at 4-cut regimes the appropriate figures ranged from 320 to 420 kg N/ha and year, at 5- and 6-cut regimes and efficiencies of 10 and 8 kg DM/kg N results of 360 - 460 kg N and 380 - 500 kg N respectively were obtained. 5. At the relatively dry location Piber the highest dressing rates were needed in order to obtain the efficiencies from 8 to 16 kg DM/kg N, about 30 - 60 kg N/ha/year more than at the relatively moist location Admont.ist location Admont.

• 대한정형외과학회지
• /
• 제54권2호
• /
• pp.141-149
• /
• 2019

목적: 단일 흉추 청소년기 특발성 척추 측만증의 수술적 치료로 척추경 나사못 고정술이 시행된 경우에 서로 다른 재질인 스테인레스강과 티타늄 합금 기기의 결과를 비교해 보고자 하였다. 대상 및 방법: 척추경 나사못 고정술과 선택적 흉추 유합술을 이용하여 수술을 시행하고 최소 2년 이상 추시가 가능하였던 단일 흉추 청소년기 특발성 척추 측만증 환자 141명을 후향적으로 조사하였다. 주 흉추 만곡이 40°-75°인 환자를 대상으로 하였으며, 기기의 재질에 따라 스테인레스강 기기가 사용된 경우는 S군(90명)으로, 티타늄 합금 기기가 사용된 경우는 T군(51명)으로 나누었다. S군의 강봉 직경은 7.0 mm였고 T군의 강봉 직경은 6.35 mm나 6.0 mm였다. 수술 전, 수술 직후와 술 후 2년에 촬영한 기립성 전 척추 방사선 사진을 이용하여 방사선적 측정을 시행하였다. 술 전 관상면과 시상면상 만곡의 측정값에서 두 군 간에 유의한 차이는 없었다. 결과: S군에서 술 전 51.3°±8.4°의 주 흉추 만곡은 술 후 2년에 19.0°±7.6° (63.1% 교정)로 감소되었고, 술 전 32.3°±8.4°의 요추 만곡은 술 후 2년에 12.7°±8.2° (62.9% 교정)로 감소되었다. T군에서는 술 전 49.5°±8.4°의 주 흉추 만곡과 30.3°±8.9°의 요추 만곡은 술 후 2년에 각각 18.8°±7.4° (62.2% 교정)와 11.3°±5.4° (63.3% 교정)로 감소되었다. 관상면상 만곡의 교정은 두 군 간에 통계적으로 유의한 차이는 없었다(p>0.05). 흉추 후만은 S군에서 술 전 16.8°±8.5°에서 술 후 2년에 24.3°±6.1°로, T군에서는 19.6°±11.2°에서 26.6°±8.5°로 증가되었다. 유합 분절수, 사용된 척추경 나사못의 개수 및 술 후 2년의 흉추 후만, 요추 전만, 관상면과 시상면 균형에도 두 군 간에 유의한 차이는 없었다(p>0.05). 결론: 척추경 나사못 고정술을 이용한 단일 흉추 청소년기 특발성 척추 측만증 수술에서 스테인레스강과 티타늄 합금 기기와 강봉은 관상면과 시상면에서 의미 있는 차이 없이 비슷한 교정을 보였다.

• 대한의생명과학회지
• /
• 제5권1호
• /
• pp.11-15
• /
• 1999

갑상선 질환의 진단에 필요한 갑상선 호르몬의 측정시 thyroxine (T$_4$)농도 측정방법이 가장 흔히 이용되고 있다. 과거에 많이 활용되어온 방사면역측정법 (RH)이 폐기물 처리 및 관리인원 등의 인적, 물적인 문제가 크게 대두되고 있는 점을 감안하면 효소결합면역측정법의 확립은 큰 의미가 있다고 하겠다. 본 연구에서는 thyroxine (T$_4$)에 대한 단클론 항체 (monoclonal antibody)를 이용하여 T$_4$에 horseradish-peroxidase를 화학적으로 결합시킨 microtiter plate에 HRP-conjugate T$_4$와 혈청내의 T$_4$간의 서로 경쟁적인 반응을 이용한 표준곡선을 얻었다. 그리고 이렇게 확립한 기법을 임상적인 갑상선질환 환자의 혈청을 기존의 chemiluminescence 방법을 이용하여 얻은 결과와 비교하여 본 실험에서 확립한 ELISA검사 수치의 유용성을 검토하였으며 이 방법의 임상이용 가능성을 검토하였다.

• Earthquakes and Structures
• /
• 제12권4호
• /
• pp.397-407
• /
• 2017

To estimate the structural seismic demand, some methods are based on an equivalent linear system such as the Capacity Spectrum Method, the N2 method and the Equivalent Linearization method. Another category, widely investigated, is based on displacement correction such as the Displacement Coefficient Method and the Coefficient Method. Its basic concept consists in converting the elastic linear displacement of an equivalent Single Degree of Freedom system (SDOF) into a corresponding inelastic displacement. It relies on adequate modifying or reduction coefficient such as the inelastic deformation ratio which is usually developed for systems with known ductility factors ($C_{\mu}$) and ($C_R$) for known yield-strength reduction factor. The present paper proposes a rational approach which estimates this inelastic deformation ratio for SDOF bilinear systems by rigorous nonlinear analysis. It proposes a new inelastic deformation ratio which unifies and combines both $C_{\mu}$ and $C_R$ effects. It is defined by the ratio between the inelastic and elastic maximum lateral displacement demands. Three options are investigated in order to express the inelastic response spectra in terms of: ductility demand, yield strength reduction factor, and inelastic deformation ratio which depends on the period, the post-to-preyield stiffness ratio, the yield strength and the peak ground acceleration. This new inelastic deformation ratio ($C_{\eta}$) is describes the response spectra and is related to the capacity curve (pushover curve): normalized yield strength coefficient (${\eta}$), post-to-preyield stiffness ratio (${\alpha}$), natural period (T), peak ductility factor (${\mu}$), and the yield strength reduction factor ($R_y$). For illustrative purposes, instantaneous ductility demand and yield strength reduction factor for a SDOF system subject to various recorded motions (El-Centro 1940 (N/S), Boumerdes: Algeria 2003). The method accuracy is investigated and compared to classical formulations, for various hysteretic models and values of the normalized yield strength coefficient (${\eta}$), post-to-preyield stiffness ratio (${\alpha}$), and natural period (T). Though the ductility demand and yield strength reduction factor differ greatly for some given T and ${\eta}$ ranges, they remain take close when ${\eta}>1$, whereas they are equal to 1 for periods $T{\geq}1s$.

• Biomolecules & Therapeutics
• /
• 제6권2호
• /
• pp.213-218
• /
• 1998

A novel in situ-gelling and mucoadhesive acetaminophen liquid suppository was developed to improve the patient compliance of conventional solid suppository. In this study, acetaminophen liquid suppository, Likipe $n_{R}$, ［aminophen/Poloxamer 407/Poloxamer 188/so4ium alginate (5/15/19/0.6%)] with relation temperature at 30-36 "C and suitable gel strength and bioadhesive force, dissolution pattern similar to conventional solid type suppository, Suspe $n_{R}$, was developed. Furthermore, the bioequivalence of two acetaminophen products was evaluated in 16 normal male volunteers (age 22-27 yr, body weight 56-72 kg) following sidle rectal administration. Test product was Likipe $n_{R}$ suppository (Dong-Wha Pharm. Corp., Korea)and reference product was Suspe $n_{R}$204-212 suppository (Hanmi Pharm. Corp., Korea). Both products contain 125 mg of acetaminophen. Four Suppositories of the test and the reference product were administered to the volunteers, respectively, by randomized two period cross-over study (2$\times$2 Latin square method). The determination of acetaminophen was accomplished using HPLC. Average drug concentrations at each sampling time and pharmacokinetic parameters calculated were not significantly different between two products (p>0.05); the area under the curve to last sampling time (24 hr) (AU $Co_{-2}$4h/) (30.14$\pm$8.64 vs 27.98$\pm$ 6.53 $\mu$g .h/ml), maximum plasma concentration ( $C_{max}$) (3.29$\pm$0.87 vs 3.60$\pm$0.66 $\mu$g/ml) and time to maximum plasma concentration ( $T_{max}$) (2.91 $\pm$0.55 vs 2.69$\pm$0.60 h). The differences of mean AUCo $_{24h}$, C-a. and T-between the two products (7.18%, 9.58% and 7.53%, respectively) were less than 20%. The power (1-7) and treatment difference ($\Delta$) for AU $Co_{24h}$, $C_{max}$ and $T_{max}$ were more than 0.8 and less than 0.2, respectively at $\alpha$=0.1. The confidence limits for AU $Co_{24h}$, $C_{max}$ and $T_{max}$ (-0.81 ~13.55%, -1.56~ 17.60 and -3.81 ~18.87%, respectively) were less than $\pm$ 20% at $\alpha$=0.1. These results suggest that the bioavailability of Likipe $n_{R}$ suppository is not significantly different from that of Suspe $n_{R}$ suppsitory. Therefore, two products are bio-equivalent based on the current results.results.lts.sults.results.lts.

• Asian Pacific Journal of Cancer Prevention
• /
• 제14권3호
• /
• pp.1803-1806
• /
• 2013

Purpose: Carbohydrate antigen (CA) 242 is inversely related to prognosis in many cancers. However, few data regarding CA 242 in esophageal cancer (EC) are available. The aim of this study was to determine the prognostic value of CA 242 and propose an optimum cut-off point in predicting survival difference in patients with esophageal squamous cell carcinoma (ESCC). Methods: A retrospective analysis was conducted of 192 cases. A receiver operating characteristic (ROC) curve for survival prediction was plotted to verify the optimum cuf-off point. Univariate and multivariate analyses were performed to evaluate prognostic parameters for survival. Results: The positive rate for CA 242 was 7.3% (14/192). The ROC curve for survival prediction gave an optimum cut-off of 2.15 (U/ml). Patients with CA 242 ${\leq}$ 2.15 U/ml had significantly better 5-year survival than patients with CA 242 >2.15 U/ml (45.4% versus 22.6%; P=0.003). Multivariate analysis showed that differentiation (P=0.033), CA 242 (P=0.017), T grade (P=0.004) and N staging (P<0.001) were independent prognostic factors. Conclusions: Preoperative CA 242 is a predictive factor for long-term survival in ESCC, especially in nodal-negative patients. We conclude that 2.15 U/ml may be the optimum cuf-off point for CA 242 in predicting survival in ESCC.

• 한국통신학회논문지
• /
• 제24권12A호
• /
• pp.2025-2033
• /
• 1999

본 연구에서는 IMT-2000 서비스의 상용화 실시 시기를 전문가 의견을 바탕으로 하여 예측한 결과 2001년 2월경에 첫 서비스를 실시할 것으로 나타나 전문가들은 대체로 빠른 진척을 예상하고 있음을 알 수 있었다. 또한 본 연구의 가장 중요한 부분인 IMT-2000 서비스 가입 수요예측에서는 가격 경쟁력에 대한 두 가지 경우에 따라 다른 모형을 제시하였다. 본 연구에서는 신제품에 대한 수요예측에 정성적 방법인 전문가 의견법과 정량적 방법인 성장곡선 모형을 결합하여 과거자료가 없는 신제품의 수요예측의 오차를 줄이고자 하였다. 각 성장곡선 모형에 필요한 계수를 전문가들의 주관적인 의견을 근거로 하여 추정하였다.

• 펄프종이기술
• /
• 제41권5호
• /
• pp.59-65
• /
• 2009

Adsorption of an oil-proof agent (OPA）onto cellulose fibers during the papermaking process was investigated using UV-Vis spectrophotometry by measuring the OPA concentration decrease in the solution. From the calibration curve, the spectrum were converted to chemical concentrations in solution, from which the amount adsorbed onto the fiber surface could be determined. Thus, it was possible to determine the total amount adsorbed onto the fibers and in solution. Using this approach, we studied the adsorption behavior of the OPA onto the fiber surface and derived its, ${\Gamma}^s_t={\Gamma}^s_{\infty}(1-e^{-k_{\alpha}t})$. The values of the parameters kaand ${\Gamma}^s_{\infty}$ were determined using a mathematic model based on a mass transfer equation. Ultimately, a complete was derived: $Q={\alpha}{\cdot}\sum\limits_{i-1}^m{\pi}d_il_i{\cdot}M_A{\cdot}(1-e^{-k_{\alpha}t})/A_N$.

• 한국농공학회지
• /
• 제45권7호
• /
• pp.49-56
• /
• 2003

Nonpoint source pollutant loading from watershed may cause a problem to the water quality of the reservoir and stream. The characteristics of stream flow and water quality were monitored to investigate the runoff loading of the Namdae-cheon watershed from May in 1999 to October in 2003. Stage-discharge rating curve at the stream gauging site was established, and annual stream runoff of the study watershed was estimated as 499.4∼1,330.8mm during four years. The concentrations of total-nitrogen and total-phosphorus of stream water quality ranged from 0.76 to 6.95mg/L and from 0.0010 to 0.2276 mg/L, respectively, where T-N was generally higher than the water quality standard 1.0 mg/L for agricultural water use. The loads by unit generation of pollutant mass with respect to population, livestock, land use in this watershed were calculated. The runoff pollutant loadings by concentrations of total-N and total-P were estimated during study period, where the annual runoff loading of total-P was much less than the load by pollutant mass unit generation. The relations between stream discharge and water quality were analysed, and there was a high correlation for total-N but low for total-P. These results will be used to develop the monitoring techniques and water quality management system of agricultural watershed.

• 반도체디스플레이기술학회지
• /
• 제5권1호
• /
• pp.13-16
• /
• 2006

AIN thin films were prepared on amorphous glass and $SiO_2(1{\mu}m)/Si(100)$ substrate by the facing targets sputtering (FTS) apparatus, which can provide high density plasma, a high deposition rate at a low working gas pressure. The AIN thin films were deposited at a different nitrogen gas flow rate ($1.0{\sim}0.3$) and other sputtering parameters were fixed such as sputtering power of 200w, working pressures of 1mTorr and AIN thin film thickness of 800 nm, respectively. The thickness and crystallographic characteristics of AIN thin films as a function of $N_2$ gas flow rate $[N_2/(N_2+Ar)]$ were measured by $\alpha$-step and an X-ray diffraction (XRD) instrument. And the c-axis preferred orientations were evaluated by rocking curve. In the results, we could prepared the AIN thin film with c-axis preferred orientation of about $5^{\circ}$ on substrate temperature R.T. at nitrogen gas flow rate 0.7.