• Journal of the Korea Computer Industry Society
• /
• v.6 no.5
• /
• pp.757-766
• /
• 2005

There have been great demands for higher density SRAM in all area of SRAM applications, such as mobile, network, cache, and embedded applications. Therefore, aggressive shrinkage of 6T Full CMOS SRAM had been continued as the technology advances, However, conventional 6T Full CMOS SRAM has a basic limitation in the cell size because it needs 6 transistors on a silicon substrate compared to 1 transistor in a DRAM cell. The typical cell area of 6T Full CMOS SRAM is $70{\sim}90F^{2}$, which is too large compared to $8{\sim}9F^{2}$ of DRAM cell. With 80nm design rule using 193nm ArF lithography, the maximum density is 72M bits at the most. Therefore, pseudo SRAM or 1T SRAM, whose memory cell is the same as DRAM cell, is being adopted for the solution of the high density SRAM applications more than 64M bits. However, the refresh time limits not only the maximum operation temperature but also nearly all critical electrical characteristics of the products such as stand_by current and random access time. In order to overcome both the size penalty of the conventional 6T Full CMOS SRAM cell and the poor characteristics of the TFT load cell, we have developed $S^{3}$ cell. The Load pMOS and the Pass nMOS on ILD have nearly single crystal silicon channel according to the TEM and electron diffraction pattern analysis. In this study, we present $S^{3}$ SRAM cell technology with 100nm design rule in further detail, including the process integration and the basic characteristics of stacked single crystal silicon TFT.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.30 no.2
• /
• pp.124-133
• /
• 2020

Objectives: Mask fit is a crucial factor in preventing respiratory infections among healthcare workers. The current coronavirus(COVID-19) pandemic calls for the replacement of imported N95 medical masks with domestic N95 versions. In this study, we aimed to determine whether these masks provide proper protection. Methods: Thirty-five participants from three healthcare institutions donned four types of masks and Quantitative Fit Tests(Portacount, USA) were performed. The order of fit test for the four types of masks was randomized, and a three-minute washout period was applied between test times(2 min 29 sec) to reduce potential error stemming from physical exhaustion. Results: There were no significant differences in the Fit Factor for the four types of masks, and there were no gender differences. However, the Fit Factor significantly differed across the three healthcare institutions (p=0.007). With eight of the 35 participants passing, the pass rate with the criteria of 100 or higher was 21%. Conclusions: The mask used in this study was a new domestic N95 medical mask, and the participants were unfamiliar with how to wear it. They reported difficulties with mask fitting. In light of a previous finding that mask fit improved with frequently used masks, wearer preferred masks, or when masks that are regularly worn are used during fit training, the fact that participants were unfamiliar with the mask used in this study is a limitation that should not be overlooked.

• Korean Journal of Environmental Agriculture
• /
• v.38 no.3
• /
• pp.119-123
• /
• 2019

BACKGROUND: Estimation of soil nitrogen supply is essential to manage nitrogen fertilization in arable land. In Korea, nitrogen fertilization is recommended based on the soil organic matter content because it is difficult to assess nitrogen (N) mineralization of upland soils directly. In this study, the relationship between soil organic matter (SOM) content and N mineralization was investigated to explore the limitation of using SOM in predicting soil N mineralization. METHODS AND RESULTS: Soil samples from the 0 to 10 cm depth were collected from 18 individual pepper cultivated fields in Tae-an and Chung-yang provinces before fertilization. N mineralization in the soils was quantified using incubation for 70 days at $30^{\circ}C$. The mineralizable soil N (MSN) was positively correlated with SOM, and the relation equation between MSN and SOM was '$MSN(kg\;10a^{-1})=0.2933{\ast}SOM(g\;kg^{-1})+0.0897$ ($r^2=0.6224$, p<0.001)'. However, the differences of N mineralization among the soils with the similar concentrations of soil organic matter were about 3 to 4.6 times, suggesting that the other soil factors such as total N concentration or EC should affect N mineralization. CONCLUSION: We concluded that SOM alone could not reflect the capacity of soil to supply N that is used for recommendation of N fertilization rate. Therefore, other soil properties should be considered to improve N fertilization management in arable land for sustainable agriculture.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.07a
• /
• pp.397-400
• /
• 2004

The design concept for 8kV light triggering thyristor(LTT) with integrated BOD was discussed here in detail. The trade-off between light triggering input source againsthigh dV/dt limitation has been treated via grooved P-base for gate design. The main application point used for high voltage DC transmission(HVDC) was represented.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.32 no.4
• /
• pp.343-352
• /
• 2012

Sulphur deficiency has become widespread over the past several decades in most of the agricultural area. Oilseed rape (Brassica napus L.) is a very sensitive to S limitation which is becoming reduction of quality and productivity of forage. Few studies have assessed the sulphur mobilization in the source-sink relationship, very little is known about the regulatory mechanism in interaction between sulphur and nitrogen during the short-term sulphur deficiency. In this study, therefore, amount of sulphur and nitrogen incorporated into amino acids and proteins as affected by different S-supplied level (Control: 1 mM ${SO_4}^{2-}$, S-deficiency: 0.1 mM ${SO_4}^{2-}$, and S-deprivation: 0 mM ${SO_4}^{2-}$) were examined. The amount of sulphur in sulphate (S-sulphate) was significantly decreased by 25.8% in S-deprivation condition, compare to control, but not nitrogen in nitrate (N-nitrate). The markedly increase of sulphur and nitrogen incorporated amino acids (S-amino acids and N-amino acids) was observed in both S-deficiency and S-deprivation treatments. The amount of nitrogen incorporated proteins (N-protein) was strongly decreased as sulphur availability while the amount of sulphur incorporated into proteins (S-protein) was not affected. A highly significant ($p{\leq}0.001$) relationship between S-sulphate and S-amino acid was observed whereas the increase of N-amino acids is closely associated with decrease of N-proteins. These data indicate that increase of sulphur and nitrogen incorporated into amino acids was from different nitrogen and sulphur metabolites, respectively

• Transactions on Electrical and Electronic Materials
• /
• v.14 no.5
• /
• pp.250-253
• /
• 2013

In this paper, we fabricated 3D pillar type silicon-oxide-nitride-oxide-silicon (SONOS) devices for high density flash applications. To solve the limitation between erase speed and data retention of the conventional SONOS devices, bandgap-engineered (BE) tunneling oxide of oxide-nitride-oxide configuration is integrated with the 3D structure. In addition, the tunneling oxide is modulated by another method of $N_2$ ion implantation ($N_2$ I/I). The measured data shows that the BE-SONOS device has better electrical characteristics, such as a lower threshold voltage ($V_{\tau}$) of 0.13 V, and a higher $g_{m.max}$ of 18.6 ${\mu}A/V$ and mobility of 27.02 $cm^2/Vs$ than the conventional and $N_2$ I/I SONOS devices. Memory characteristics show that the modulated tunneling oxide devices have fast erase speed. Among the devices, the BE-SONOS device has faster program/erase (P/E) speed, and more stable endurance characteristics, than conventional and $N_2$ I/I devices. From the flicker noise analysis, however, the BE-SONOS device seems to have more interface traps between the tunneling oxide and silicon substrate, which should be considered in designing the process conditions. Finally, 3D structures, such as the pillar type BE-SONOS device, are more suitable for next generation memory devices than other modulated tunneling oxide devices.

• Journal of Korean Society of Water and Wastewater
• /
• v.21 no.6
• /
• pp.679-687
• /
• 2007

Nanoscale zero valent ion (nZVI) technology is emerging as an innovative method to treat contaminated groundwater. The activity of nZVI is very high due to their high specific surface area, and supporting this material can help to preserve its chemical nature by inhibiting oxidation. In this study, nZVI particles were attached to granular ion-exchange resin through borohydride reduction of ferrous ions, and chemical reduction of nitrate by this material was investigated as a potential technology to remove nitrate from groundwater. The pore structure and physical characteristics were measured and the change by the adsorption of nZVI was discussed. Batch tests were conducted to characterize the activity of the supported nZVI and the results indicated that the degradation of nitrate appeared to be a pseudo first-order reaction with the observed reaction rate constant of $0.425h^{-1}$ without pH control. The reduction process continued but at a much lower rate with a rate constant of $0.044h^{-1}$, which is likely limited by mass transfer. To assess the effects of other ions commonly found in groundwater, the same experiments were conducted in simulated groundwater with the same level of nitrate. In simulated groundwater, the rate constant was $0.078h^{-1}$ and it also reduced to $0.0021h^{-1}$ in later phase. The major limitation in application of ZVI for nitrate reduction is ammonium production. By using a support material with ion exchange capacity, the problem of ammonium release can be solved. The ammonium was not detected in the batch test, even when other competitive ions such as calcium and potassium existed.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.12 no.3 s.26
• /
• pp.165-170
• /
• 2006

In this study, organic matters production was calculated with long term data in Wando costal area where was selected for non influent of fresh water. The objective of this study was to evaluate relationship between nutrients and phytoplankton and, between phytoplankton and organic matter. The result of DIN was the highest with 0.138 mg/L in winter season and the lowest with 0.052 mg/L in summer season. Similarly, DIP was shown to be 0. 017 mg/L in winter and 0.011 mg/L in summer. Limiting nutrient was revealed with nitrogen in Wando costal area. Specially in summer season, nitrogen limitation was the greatest with 10.5 of N/P ratio. Chl. -a was increased 80%, 108% in spring and summer compare with winter. COD was the lowest with 0.84 mg/L in winter and the highest with 1.10 mg/L in summer. The interrelation between nutrients and Chl. -a was high. Relationship $coefficient(r^2)$ were 0.93(P<0.05), 0.89(P <0.05) between DIN and Chi. -a, DIP and Chl. -a. This results suggest dissolved nutrients might be utilized at the production of phytoplankton. Also Relationship $coefficient(r^2)$ was 0.77(P<0.05) between Chl. -a and COD. COD production rate was calculated with regression equation. The COD production rate was 17% in winter and 36% in summer. It was revealed nutrients were decreased according to temperature increasing and then Phytoplankton and organic matter were increased. The Relationship of Nutrients, Chl. -a and COD was very high.

• Journal of Korean Society on Water Environment
• /
• v.26 no.3
• /
• pp.377-386
• /
• 2010

Introduction of TBELs into Korean environmental regulatory system for wastewater may require very careful considerations and appropriate modifications of the TBELs applied in US. The Korean regulations for wastewater are based on uniform regulatory criteria for wastewater effluent discharge and are quite different from the individual permit system in US. In addition, the toxic pollutants regulated in Korea are much less than those in US. Therefore, the effects of TBELs application on the pollutants reduction and the economic feasibility should be carefully assessed for different categories of wastewater sources. In this study, the applicability of TBELs for the industrial categories of Korea was discussed. The TBELs were derived for a sample category, the pulp paper paperboard manufacture, based on the previously reported analytical data from 52 facilities of the domestic pulp paper paperboard manufacture in Korea. It was suggested that the BAT effluent limitations were BOD 30 mg/L, $COD_{Mn}$ 40 mg/L, SS 40 mg/L, T-N 30 mg/L and T-P 4 mg/L and that the allowable effluent loads were $0.31{\sim}1.75kgCOD_{Mn}/ton$-products. Due to the limitation of insufficient data, there were difficult to obtain the important factors to derive more systematic and accurate limitation standards for the pollutants such as the 'Long Term Average (LTA)', the 'Product Normalized Discharge Flow (PNDF)', and the 'Variability Factor (VF)'. However, as the first trial of TBELs determination based on the all available analytical data reported, the procedure and the outcome of the study may provide valuable insight on application of TBELs in Korea.

• Journal of Environmental Impact Assessment
• /
• v.17 no.5
• /
• pp.311-320
• /
• 2008

Reusing livestock manure have various advantages in securing soil organic resources, and since the costs needed for converting them into liquefied fertilizers are relatively moderate compared to normal treatment, such methods are necessary. In this study, the Recycling Capacity Assessment of Gyeonggi-do was carried out by comparing between the fertilizer demands for specific crops based on the cultivation areas and the amount of fertilizer resources that are generated from livestock manure. From this assessment, the possibility of obtaining resources by converting livestock manure into fertilizers were evaluated. The amount generated of Livestock Manure in Gyeonggi-do were evaluated by applying the emission units to the number of livestock manure. And from the amount generated of Livestock Manure, the amount of fertilizer produced from Livestock Manure were calculated by using the fertilizer a component rate. When considering the amount of fertilizer produced from Livestock Manure based on the type of livestock, N 6,626 ton/year, $P_2O_5$ 1,824 ton/year, $K_2O$ 4,480 ton/year were produced from milk cow manure, while N 5,247 ton/year, $P_2O_5$ 2,772 ton/year, $K_2O$ 2,879 ton/year, were produced from beef cattle manure. N 14,924 ton/year, $P_2O_5$ 7,205 ton/year, $K_2O$ 6,750 ton/year were produced from pigs and N 12,651 ton/year, $P_2O_5$ 4,458 ton/year, $K_2O$ 5,542 ton/year were produced by chickens. So the total amount of fertilizers that can be obtained from livestock manure were 3,668 ton/year Nitrogen, 16,259 ton/year phosphate and 19,651 ton/year kalium. And the total fertilizer demands in Gyeonggi-do were Nitrogen 27,200 ton/year, Phosphate 8,853 ton/year, and kalium 13,211 ton/year respectively. Nitrogen which had higher demands than production quantities were considered as limitation factors in crop growth. So the Recycling Capacity Assessment was carried out mainly based on Nitrogen. Since the Nitrogen quantities that can be provided by recycling livestock manure were 3,532 ton/year lesser than the Nitrogen demands, it is estimated that it would be desirable to convert livestock manure into resources. But in order to properly convert the entire livestock manure into organic resources, the seasonal situation that effects the nitrogen demands of crops along with the regional effects due to the industrial structures should be seriously analyzed. In addition, a system that can effectively produce and manage fertilizer should be established.