• Journal of IKEEE
• /
• v.25 no.1
• /
• pp.15-24
• /
• 2021

In this paper, 1700 V EPDT (Extended P+ shielding floating gate Double Trench) MOSFET structure, which has a smaller switching time and loss than CDT (Conventional Double Trench) MOSFET, is proposed. The proposed EPDT MOSFET structure extended the P+ shielding area of the source trench in the CDT MOSFET structure and divided the gate into N+ and floating P- polysilicon gate. By comparing the two structures through Sentaurus TCAD simulation, the on-resistance was almost unchanged, but Crss (Gate-Drain Capacitance) decreased by 32.54 % and 65.5 %, when 0 V and 7 V was applied to the gate respectively. Therefore, the switching time and loss were reduced by 45 %, 32.6 % respectively, which shows that switching performance was greatly improved.

• The Journal of Advanced Prosthodontics
• /
• v.1 no.2
• /
• pp.102-106
• /
• 2009

STATEMENT OF PROBLEM. Screw loosening has been a common complication and still reported frequently. PURPOSE. The purpose of this study was to evaluate abrasion of the implant fixture and TiN coated abutment screw after repeated delivery and removal with universal measuring microscope. MATERIAL AND METHODS. Implant systems used for this study were Osstem and 3i. Seven pairs of implant fixtures, abutments and abutment screws for each system were selected and all the fixtures were perpendicularly mounted in liquid unsaturated poly-esther with dental surveyor. After 20 times of repeated closing and opening test, the evaluation for the change of inner surface of implant and TiN-coated abutment screw, and weight loss were measured. Mann-Whitney test with SPSS statistical software for Window was applied to analyze the measurement of weight loss. RESULTS. TiN-coated abutment screws of Osstem and 3i showed lesser loss of weight than non-coated those of Osstem and 3i (P < .05, Mann-Whitney test). CONCLUSION. Conclusively, TiN coating of abutment screw showed better resistance to abrasion than titanium abutment screw. It was concluded that TiN coating of abutment screw would reduce the loss of preload with good abrasion resistance and low coefficient of friction, and help to maintain screw joint stability.

• Korean Journal of Soil Science and Fertilizer
• /
• v.44 no.3
• /
• pp.361-367
• /
• 2011

Soil fertility of alpine soils in Gangwon-Do has been deteriorating because of heavy input of chemical fertilizers for intensive crop production. To reduce application of chemical fertilizers, use of livestock manure compost in alpine soils increases consistently. Soil loss and runoff due to heavy rainfall in alpine area cause nutrient loss from soil, and subsequently pollute stream water. Therefore, the objective of this study was to assess nutrient efficiency and loss in Chinese cabbage cultivated soil with different livestock manure composts in several slopes. As control, chemical fertilizer was applied at the rate of $250-78-168kg\;ha^{-1}$ for $N-P_2O_5-K_2O$. Each pig-and chicken manure compost was applied at the rate of $10MT\;ha^{-1}$. Chemical fertilizer + chicken manure compost was applied as same rate. Four treatments was practiced in 5, 20, and 35% filed slopes, respectively. We monitored the amounts of soil loss and runoff water after rainfalls, and we also analyzed the contents of nutrients in soil and runoff water through lysimeter installed in alpine agricultural institute in Gangwon-Do. T-N loss due to soil loss was much greater with increasing filed slops rather than different fertilizer treatments. T-N loss has positive relationship with field slopes, which showing soil loss (MT/ha) = 1.66 slopes (%) - 3.5 ($r^2$ = 0.99). Available phosphate and exchangeable cations showed similar tendency with increasing slopes. T-N and T-P losses caused by runoff water were highest in chemical fertilizer (NPK) + chicken manure compost treated plot, while lowest in chemical fertilizer treatment. T-N contents (2.13, 1.95%) in chinese cabbage treated either pig and chicken manure composts compared to that (2.65%) of chemical fertilizer were significantly less. This could be resulted from much greater T-N loss in soil treated with pig and chicken manure composts.

• Journal of Magnetics
• /
• v.8 no.2
• /
• pp.93-97
• /
• 2003

For the induction motor and inverter type motor design, prediction and analysis of core loss including higher harmonics have been studied. In this work, we have generated two symmetrical ac minor loop in the fundamental hysteresis loop whose positions are zero induction region and saturation induction region, and we could pre-dict core loss including higher harmonics inductions. using the following modified superposition principle; $P_c(B_0,f_0,B_h,nf_0)=P_c(B_0,f_0)+(n-1)[K_1(B_0)P_{cL}(B_h,nf_0)+(1-k_1(B_0))P_{cH}(B_h,nf_0)].$Using this equation we could also analyze core losses including higher harmonic induction under different maximum magnetic induction, different amplitude of higher harmonic induction with different harmonic frequencies.

• Journal of Magnetics
• /
• v.6 no.2
• /
• pp.66-69
• /
• 2001

The actual magnetic induction waveform of cores in electrical machines is not sinusoidal i.e. higher harmonics are always included. Thus the core loss in actual electrical machines is different from the core loss which is measured by the standard method, because the waveform of magnetic induction should be sinusoidal in the standard testing method. Core loss analysis under higher harmonic induction is always important in electric machine design. In this works we measured the core loss when a hysteresis loop has only one period of an ac minor loop of higher harmonic frequency, depending on the position of the ac minor loop of relative to the fundamental harmonic frequency. From this experiment, the core loss P(B/sub 0/f/sub 0/, B/sub h/, nf/sub 0/)) under a higher harmonic magnetic induction B/sub h/ could be expressed by the linear combination the core loss at fundamental harmonic frequency P/sub c/(B/sub 0/, f/sub 0/), the core loss of ac minor loop at zero induction region of the major hysteresis loop P/sub cL/ (B/sub h/, nf/sub 0/), and the core loss of an ac minor loop in the high induction region of the major hysteresis loop P/sub cH/ (B/sub h/, nf/sub 0/) i.e., P/sub c/, (B/sub 0/, f/sub 0/, B/sub h/, nf/sub 0/)=P/sub c/ (B/sub 0/, f/sub 0/,)+(n-1)[k₁(B/sub 0/) P/sub cL/ (B/sub h/, nf/sub 0/)+(1-k₁(B/sub 0/)) P/sub cH/ (B/sub h/, nf/sub 0/)]. This will be useful formula for electrical machine designers and one of effective methods to predict core loss including higher harmonic induction.

• Journal of Korean Society of Forest Science
• /
• v.80 no.3
• /
• pp.303-310
• /
• 1991

Seasonal patterns of decomposition and nutrient release from the needle litter were examined using litter-bags in coastal Pinus thunbergii forests in nothern Kyushu, Japan. Dry matter losses from decomposing needle litter were smillar in all standsover a experimental period. Mass loss in dry weight is lost rapidly during the first year, and thereafter the rate of loss slows. Litter lost approximately 40% of initial mass in 1 yr. The predicted decay constant, k values ranged from 0.5 to 0.6 Decomposition half-times($t_{0.50}$) ranged from 1.1 to 1.4 year. In the decomposing needle litter, the concentrations of N and P generally increased with time while the concentration of K decreased. A decrease in absolute amount was noted for K during decomposition while in an increase was found for N. The order of mobility of elements was K>P>N. Mineralization phase of N had not appeared during the experiment.

• The Journal of Advanced Prosthodontics
• /
• v.13 no.1
• /
• pp.46-54
• /
• 2021

Purpose. The design of the implant-abutment complex is thought to be responsible for marginal bone loss (MBL) and might affect the condition of the peri-implant tissues. This the present study aimed to evaluate the influence of the implant-abutment complex on MBL and the peri-implant tissues in partially edentulous patients treated with dental implants and determine the most advantageous design. Materials and Methods. A total of ninety-one endosseous implants with different designs of implant-abutment complex [tissue level-TL (n = 30), platform switch-PS (n = 18), and platform match-PM (n = 43)] were reviewed for MBL, Probing Pocket Depth (PPD) and Bleeding on Probing (BoP). MBL was calculated for first year of the insertion and the following years. Results. The median MBL for the PM implants (2.66 ± 1.67 mm; n = 43) in the first year was significantly higher than those for the other types (P=.033). The lowest rate of MBL (0.61 ± 0.44 mm; n = 18) was observed with PS implants (P=.000). The position of the crown-abutment border showed a statistically significant influence (P=.019) and a negative correlation (r=-0.395) on MBL. BoP was found significantly higher in PM implants (P=.006). The lowest BoP scores were detected in PS implants, but the difference was not significant (P=.523). The relation between PPD and connection type revealed no statistically significant influence (P>.05). Conclusion. Within the limitations of the present study, it may be concluded that PS implants seem to show better peri-implant soft tissue conditions and cause less MBL.

• Asian-Australasian Journal of Animal Sciences
• /
• v.26 no.2
• /
• pp.171-177
• /
• 2013

The aim of the present study was to determine the evidence of post-parturient disorders and backfat loss during lactation in sows raised in tropical areas in relation to their backfat thickness before farrowing and postpartum intravenous supportive treatment. Backfat thickness was measured using A-mode ultrasonography at farrowing and weaning ($25.5{\pm}1.4$ d) in 70 sows. The sows were divided into three groups according to backfat thickness before farrowing, i.e., 15.0 to 20.0 mm (n = 21), 20.5 to 25.0 mm (n = 35), >25.0 mm (n = 14) and were categorized into two groups according to the postpartum supportive treatment, i.e., control (n = 31) and treatment (n = 39). After farrowing, the sows in treatment group received the same medications as in control sows. Furthermore an intravenous supportive treatment with amino acids and vitamins was administered in treatment groups. Rectal temperature and clinical signs of the sows including vaginal discharge, udder problems and appetite were determined at d 0, 1, 2 and 3 of parturition. It was found that, on average, the backfat thickness was $22.4{\pm}3.9$ mm at farrowing and $19.9{\pm}2.9$ mm at weaning. The backfat loss and the relative backfat loss during the lactation period were 2.6 mm and 10.6%, respectively. The sows with a backfat of 15.0 to 20.0 mm before farrowing lost less backfat than those with a backfat of 20.5 to 25.0 mm and >25.0 mm (p<0.05). Sows with a backfat of 15.0 to 20.0 mm had a better appetite on d 1 postpartum than sows with a backfat of 20.5 to 25.0 mm (p = 0.020). The percentage of sows losing backfat >10% during lactation were higher in sows with a backfat of >25.0 mm before farrowing (85.7%) than sows with a backfat of 15.0 to 20.0 mm before farrowing (35.0%) (p = 0.008). The percentage of sows with a reduced appetite on d 1 (90.3% vs 71.8%, p = 0.018) and d 2 (61.3% versus 33.3%, p = 0.005) postpartum in the treatment group was lower than the control group. In conclusion, the backfat thickness of sows at farrowing influenced backfat loss during lactation under hot and humid climates. The intravenous supportive treatment of sows with amino acid and vitamins significantly improved the appetite of postpartum sows.

• Journal of applied mathematics & informatics
• /
• v.3 no.1
• /
• pp.55-64
• /
• 1996

Let $X_1, ....$X_P be p($\geq$2) independent random variables, where each X1 has a gamma distribution with $k_i and ${\heta}_i$. The problem is to simultaneously estimate p gammar parameters ${\heta}_i$ under entropy loss where the parameters are believed priori. Hierarchical bayes(HB) and empirical bayes(EB) estimators are investigated. Next computer simulation is studied to compute the risk percentage improvement of the HB, EB and the estimator of Dey et al.(1987) compared to MVUE of ${\heta}$.

• Korean Journal of Soil Science and Fertilizer
• /
• v.31 no.2
• /
• pp.170-176
• /
• 1998

Nitrogen and phosphorus loads from an agricultural watershed of the Yulmun-chon tributary in the Buk-Han River Basin were quantified based on total amounts of water stream flow. The water quality and soil loss were estimated. Levels of the stream were recorded automatically using the water level meter. The flow velocities, along with the cross-sectional areas of the riverbed, were measured to estimate total amounts of water flow at three monitoring sites in this tributary. Water samples were collected at nine sites with two weeks interval from May to August and analyzed for the water quality parameters. Amounts of soil loss were estimated by the USLE. The size of the Yulmunchon watershed was 3,210 ha, of which paddy and upland soil areas were composed about 41%. The total amounts of soil loss from the watershed areas were estimated to be $13,273Mg\;year^{-1}$, showing 53%, 46% and 0.7% of the soil loss ratio from upland, forest, and paddy areas, respectively. Electrical conductivities and Nitrogen concentrations of the stream water were higher in the lower watershed area than in the upper area. Increments of N were higher for $NO_3-N$ than $NH_4-N$. Nitrate nitrogen was the major N form to pollute the water due to the agricultural activity. Total runoff was about 72% of the total precipitation in the watershed. The maximum loads of T-N and T-P due to the runoff were estimated to be 1,500 and $5kg\;day^{-1}$, respectively. Concentrations of $NO_3-N$ and $NH_4-N$ in the runoff were 13.5 and 1.8 times higher than those in precipitation. The N loads were mainly from soil loss, application of fertilizer, and livestock wastes, which were 52% of total N load. Results demonstrated that reduction of fertilizer use and the soil loss would be essential for water quality protection of the agricultural watershed.