• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.3
• /
• pp.267-272
• /
• 2011

We analyzed the wear characterization of $Si_3N_4$ ceramics according to the amount of added $SiO_2$ nanocolloid. The test specimen was prepared by hot-press sintering at 35 MPa and 2123 K in an $N_2$ gas atmosphere for 1 h. A wear test was performed with a block-on-ring tester, and the test conditions were as follows: (1) the ring with a diameter of 35 mm had a rotational speed of 50 rpm; (2) the load was 9.8 N; and (3) the temperature was $25^{\circ}C$. The test results show that $Si_3N_4$ ceramics have a friction coefficient of about 1.0 and a wear loss of about 0.02 mm. Of the specimens used this study, the test specimen with 1.3 wt% of added $SiO_2$ nanocolloid has the best wear resistance because it has the lowest friction coefficient and the smallest wear loss. This specimen also has the highest Vickers hardness and bending strength. In this study, the friction coefficient is inversely proportional to the hardness and bending strength.

• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 1996.06a
• /
• pp.200-203
• /
• 1996

• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 1998.10a
• /
• pp.54-57
• /
• 1998

• Journal of Korea Water Resources Association
• /
• v.30 no.5
• /
• pp.503-514
• /
• 1997

• Journal of IKEEE
• /
• v.12 no.4
• /
• pp.255-262
• /
• 2008

In this paper, we proposed the novel IGBT with an additional n-type MOS structure to achieve the improved trade-off between turn-off and on-state voltage drop(Vce(sat)). These low on-resistance and the fast switching characteristics of the proposed IGBT are caused by an enhanced electron current injection efficiency which is caused by additional n-type MOS structure. In the simulation result, the proposed IGBT has the lower on state voltage of 2.65V and the shorter turn-off time of 4.5us than those of the conventional IGBT(3.33V, 5us).

• Polymer(Korea)
• /
• v.31 no.6
• /
• pp.474-478
• /
• 2007

Polymer substrate materials with low dielectric loss were obtained by fabricating the composite using dicyclopentadienyl bisphenol cyanate ester oligomer and polyphenylene ether (PPE). From the analysis of the curing reaction of oligomer and catalyst, it was observed that the optimum amount of catalyst was 0.02 phr of Zn content. It was applied to the fabrication of polymer composite. By changing oligomer/PPE weight ratio, the peel strength and the gel content of the fabricated composites were measured, and then, the dielectric constant and the dissipation factor were measured in the GHz frequency range. The amount of PPE affected the peel strength and the dielectric properties of composites. However, the amount of catalyst did not affect them at all. Resulting from all experiments, we obtained polymer composite laminates haying the peel strength of above 1 kN/m and the low dissipation factor of 0.004 at 1 GHz.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.515-515
• /
• 2023

팔당호는 북한강과 남한강이 합류하여 생성된 호소로 수도인 서울과 수도권인 경기도 동부지역의 물 공급을 담당하는 중요한 상수원이다. 이러한 팔당호에서 유해남조 발생은 상수원수 활용과 직접적으로 연관되어 있어 신속하고 정확한 관리 및 예측이 필요하다. 본 연구에서는 안전한 상수원 활용을 위해, 딥러닝 기법을 이용하여 유해남조 사전 예측 모델을 구축하고자 하였다. 모델 입력 변수는 2012년부터 2021년까지 10년 동안의 주간 팔당호 수질(수온, DO, BOD, COD, Chl-a, TN, TP, pH, 전기전도도, TDN, NH4N, NO3N, TDP, PO4P, 부유물질)과 수문(유입량, 총방류량), 기상 정보(평균기온, 최저기온, 최고기온, 일 강수량, 평균풍속, 평균 상대습도, 합계일조량), 그리고 북한강과 남한강 유입지점의 남조 세포 수를 사용하였다. 모델 출력 변수는 수질, 수문, 기상 요인으로 인한 남조의 성장 발현 시기를 고려하여 1주 후의 댐앞 남조 세포수를 사용하였다. 사용한 딥러닝 기법은 최근 주목받고 있는 Temporal Fusion Transformer (TFT)를 사용하였다. 모델 훈련용 데이터와 테스트용 데이터는 각각 8:2의 비율로 나누었으며, 검증용 데이터는 훈련용 데이터 내에서 훈련 데이터와 검증 데이터를 6:4 비율로 분배하였다. Lookback은 5로 설정하였고, 이는 주단위 데이터로 구성된 데이터세트의 특성을 반영한 것이다. 모델의 성능은 실측값과 예측값을 토대로 R-square와 Root Mean Squared Error (RMSE)를 계산하여 평가하였다. 모델학습은 총 154번 반복 진행되었으며, 이 중 성능이 가장 준수한 시점은 54번째 반복 시점으로 훈련손실 대비 검증손실이 가장 양호한 값을 나타냈다(훈련손실:0.443, 검증손실 0.380). R-square는 훈련단계에서 0.681, 검증단계에서 0.654였고, 테스트 단계에서 0.606으로 산출되었다. RMSE는 훈련단계에서 0.614(㎍/L), 검증단계에서 0.617(㎍/L), 테스트 단계에서 0.773(㎍/L)였다. 모델에 사용한 데이터세트가 주간 데이터라는 특성을 고려하면, 소규모 데이터를 사용하였음에도 본 연구에서 구축한 모델의 성능은 양호하다고 평가할 수 있다. 향후 연구에서 데이터세트를 보강하고 모델을 업데이트한다면, 모델의 성능을 더욱더 개선할 수 있을 것으로 기대된다.

• The Journal of the Convergence on Culture Technology
• /
• v.2 no.2
• /
• pp.51-63
• /
• 2016

The aim of this study was to investigate medical expenses and productivity lost costs associated with medical use of arthropathy disease. For this study, Using by Korea Medical pannel 5434 family and 15872 people in 2012, the enrolled 19-year-old arthropathy were considered and 1370 people were analyzed. Research Method was medical management calculation formular. Emergency medical using cost was 42,128,870 won per year, productivity lost costs was 98,640,000 won per year. Admission medical using times were 4.79, medical cost was 42,128,870 won, productivity lost cost was 945,036,820 won. Out patient clinic using time per year were 12.7, medical cost was 42,128,870 won, productivity lost cost was 91,252,728,000 won. According to this study, athropathy disease could affect to medical cost increasing and productivity decreasing, therefore I suggest that exercise and management for decreasing athropathy disease.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.42 no.2 s.302
• /
• pp.87-100
• /
• 2005

In this paper, we propose a new selective temporal error concealment algerian best suited for H.264/AVC. The proposed algorithm performs selective temporal error concealment depending on whether the lost block is at background or foreground. It the corrupted macroblock is decided as at background, then the simple temporal replacement is performed. Also we propose replacing a lost block at foreground with the selective average of respectively estimated blocks from the multiple reference frames. This paper supposes error-corrupted H.264/AVC video bitstreams over CDMA2000 (or UMTS) air interface. It is shown that under Flexible Macroblock Ordering (FMO) coding of H.264/AVC, the proposed algorithm provides PSNR gain up to 1.18dB compared to built-in algorithm in the K264/AVC test model. In addition, the proposed error concealment method has average PSNR improvement of 0.33dB compared with that under N-slice coding mode. The proposed algorithm also provides better subjective video quality than other conventional error concealment algorithms.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.38 no.3
• /
• pp.20-20
• /
• 2001

광섬유고리에 편광제어를 통해 여러 광경로들에 대해서 손실을 조정함으로써 손실이 작은 광경로에서 발진하게 함으로써 발진 파장을 가변시킬 수 있는 편광제어 파장가변 고리형 광섬유레이저를 구현하였다. 내부 공진편광기를 사용하여 1㎚의 종모드간격으로 발진을 일으킬 수 있었고 편광제어기 및 내부공진편광기를 조절해서 1540㎚에서 1560㎚의 범위에서 파장가변을 시킬 수 있었다. 또한 실험적으로 나타난 발진특성을 광경로와 복굴절손실의 개념을 사용하여 발진출력 특성을 분석함으로써 발진파장을 가변시키는 메카니즘을 추정해 보았다. 여기서 복굴절손실이 같은 광경로들의 종모드들 사이에 보강간섭이 일어나 발진파장을 변화시킬 수 있음을 알 수 있었다.