• 제목/요약/키워드: N:P ratio(N:P)

검색결과 3,061건 처리시간 0.221초

명태피 및 말쥐치피를 이용한 피교의 최적가공조건과 품질에 대하여 (CONDITIONS FOR ALASKA POLLACK AND FILE FISH SKIN GLUE PROCESSING AND THE QUALITY OF PRODUCT)

  • 이응호;하진환;허우덕
    • 한국수산과학회지
    • /
    • 제10권1호
    • /
    • pp.1-9
    • /
    • 1977
  • 수산물 가공시의 부산물인 어피, 어두 등을 보다 효율적으로 이용할 수 있는 방법을 검토하기 위하여 우선 어피를 원료로 피교를 가공할 때의 최적조건 및 제품의 이화열적 특성을 실험하고 아울러 제품의 구성아미노산을 분석한 결과를 요약하면 다음과 같다. 전 어체중량에 대한 피의 수율은 명태피가 $4.6\%$, 말쥐치피가 $5.0\%$였다. 명태피교 최적가공조건은 알칼리 용액 3시간, 침지용액의 알칼리농도 $0.1\%$, 첨가수량은 명태피 중량의 3배, 추출온도 $70^{\circ}C$, 추출 시간 3시간, 추출용액의 pH 5.0이었고, 말주치피교 최적 가공조건은 알칼리용액 침지시간, 침지용액의 알칼리농도, 추출농도, 추출시간 및 추출용액의 pH는 명태피교의 가공조건과 같이 첨가수량은 말쥐치피 중량의 5배였다. 일반성분 분석 결과 명태 및 말쥐치피교제품의 단백질 함량은 각각, $98.0\%,\;96\%$이었으며, 다른 일반성분 의 조성도 시판 gelatin과 비슷하였다. 명태와 말쥐치피교 제품의 점도는 5.84 및 5.79였고, 융점은 $21.8^{\circ}C$$25.0^{\circ}C$, 응고점은 $7.1^{\circ}C$$7.4^{\circ}C$이었고, jelly강도는 10.0g 및 11.6g이었다. 색도와 탁도는 명태피교 제품이 말쥐치피교 제품보다 약간 좋았다. 그리고 구성아미노산 조성으로 보아 추룰잔사도 사육원료로서 손색이 없었다. 또한 피교제품의 총아미노산에 대한 개별아미노산이 차지하는 비율은 시약급 gelatin과 거의 같았다.

  • PDF

돈분 퇴비화 시 공기 흡입 강도에 따른 이화학적 특성변화 (Changes of Physico-chemical Characteristic on Swine Manure Using Different Suction Strength in Composting System)

  • 이동준;김중곤;정광화;곽정훈;;이지웅
    • 유기물자원화
    • /
    • 제25권2호
    • /
    • pp.59-67
    • /
    • 2017
  • 본 연구는 톱밥이 수분조절재로 혼합된 돈분 퇴비화 시 공기 흡입 강도의 효과를 조사하기 위해 실시하였다. 25 L 규모의 퇴비화 반응기에 일정하게 주입되는 공기 주입량을 기준으로 공기 흡입량을 4 단계 (100%, 200%, 300%, 400%)로 구분하여 실험을 수행하였다. 모든 반응기의 온도가 퇴비화 개시 후 2일 이내에 호열성 단계에 도달하였으며 퇴비화 5일 까지 이를 유지하는 것을 관찰할 수 있었다. 이후 반응기의 온도는 점차 감소하여 퇴비화 실험이 끝날 무렵에는 외기와 비슷한 온도를 나타냈다. 초기 혼합원료의 수분함량은 64.27% 로 측정되었으며, 점차 감소하여 100%에서 38.4, 200%에서 33.08%, 300%에서 14.59% 그리고 400%에서 11.93로 나타났다. 퇴비화 기간 동안, pH는 6.83에서 8.67로 증가하였다가 점점 감소하여 100%, 200%에서 7.56, 300%에서 8.19, 400%에서 8.08로 관찰되었으며, 이는 100%와 200%의 공기 흡입강도가 타 처리구보다 퇴비화에 적합한 흡입조건인 것으로 사료된다. 퇴비화 초기 혼합 원료의 총 켈달질소 (TKN)는 2.3%로 측정되었으나, 점차 변화하여 퇴비화 종료 시점에 100%는 3.3%, 200%는 3.1%, 300%는 2.5%, 400%는 2.3%로 조사되었다. 이러한 결과는 100%, 200% 처리구가 타 처리구에 비해 $CO_2$ 발생 및 수증기 휘발로 인한 중량손실이 높기 때문인 것으로 사료된다. 퇴비화 초기 혼합원료의 C/N비는 25.17로 측정되었으며 급격히 감소하여 퇴비화 종료 시점에는 100%에서 11.88 200%에서 11.97, 300%에서 14.31, 400%에서 14.72로 조사되었으나 처리구 간 큰 차이는 발견되지 않았다. 이상의 연구 결과 양질 퇴비화를 위한 공기 주입량 대비 최적 공기 흡입 강도는 100%와 200% 처리구인 것으로 조사되었다.

활엽수림과 침엽수림 부식토 내 세균군집의 계통학적 특성 비교 (Comparison of Phylogenetic Characteristics of Bacterial Populations in a Quercus and Pine Humus Forest Soil)

  • 한송이;조민혜;황경숙
    • 미생물학회지
    • /
    • 제44권3호
    • /
    • pp.237-243
    • /
    • 2008
  • 충남 계룡산 북사면 지역의 대표군락인 상수리림과 소나무림 부식토의 화학적 및 미생물학적 특성을 비교검토한 결과, 상수리림 부식토의 pH는 $5.3\pm0.4$, 소나무림의 pH는 $4.1\pm0.9$이었으며, 소나무림 부식토 내 탄질율은 $21.76\pm8%$로 상수리림보다 높게 나타났다. 상수리림과 소나무림 부식토 내 총 유기산은 각각 69.57 mM/g dry soil, 153.72 mM/g dry soil로 나타났으며 소나무림 부식토 내 glutamine, pyruvate, succinate, lactic acid 및 acetic acid의 함량이 상수리림 부식토에 비해 약 $1.5\sim4.5$배 높게 나타났다. 상수리림 부식토 내 전세균수는 소나무림 보다 약 16배, 생균수는 약 2배 높게 검출되었다. 각 부식토로부터 직접 DNA를 추출하여 16S rRNA-ARDRA법에 의한 세균군집의 계통학적 특성을 평가한 결과, 상수리림 부식토로부터 분리된 대표 clone은 ${\alpha}-$, ${\beta}-$, ${\gamma}-$, ${\delta}$-Proteobacteria, Firmicutes, Acidobacteria 및 Actinobacteria의 7개 계통군이 확인되었고, 소나무림 부식토외 대표 clone은 ${\alpha}-$, ${\beta}-$, ${\gamma}$-Proteobacteria, Actinobacteria, Acidobacteria, Planctomycetes, Verrucomicrobia 그리고 Bacteroidetes의 8개의 계통군이 확인되었다. Shannon-Wiener법에 의해 다양성 지수를 산출한 결과, 소나무림 부식토 내 세균군집의 다양도는 3.63으로 상수리림보다 높게 나타났으며 PCA 분석을 실시한 결과, Clusters I에 속하는 모든 clone은 상수리림 부식토에서 유래된 clone이었으며, Clusters II에 속하는 clone의 67%, Clusters III에 속하는 clone의 63%가 소나무림 부식층 토양으로부터 유래된 clone으로 확인되어 상수리림과 소나무림 부식토내 세균 군집구조는 매우 특징적인 계통학적 특성을 나타내었다.

동력경운기의 경사지견인 및 주행특성에 관한 연구 (Ⅲ)-동력경운의 경사지 견인성능- (Study on the Travel and Tractive Characteristics of the Two-Wheel Tractor on the General Slope Land(Ⅲ)-Tractive Performance of Power Tiller-)

  • 송현갑;정창주
    • Journal of Biosystems Engineering
    • /
    • 제3권2호
    • /
    • pp.34-34
    • /
    • 1978
  • 동력경운깅가 일반 경사지에서 견인주행하는 경우 견인주행성능과 주행특성을 구명하기 위하여 토양의 종류 및 상태는 일정하게 하고 지면의 기하학적 조건과 견인주행속도 및 견인하중을 변수로 하여 외부동력전달계의 시점인 좌우차륜과 토양간에 발생하는 차륜구동력 및 굴름정항과 Engine에서 구동륜까지 내부전달계를 통하여 전달된 동력의 이론치와 실험치와의 부합여부를 검정하고 부가적으로 동력경운기가 경사지기계화의 동력기로써의 가능성여부와 문제점을 찾으려한다.

조사연도에 따른 흡연 유형과 치주질환의 관련성 분석: 제4기, 제5기 국민건강영양조사를 이용하여 (The Association between Types of Smoking and Periodontal Disease according to the Survey Year Using the Fourth and Fifth Korea National Health and Nutrition Examination Surveys)

  • 김명희;윤미숙;임연희;이새롬;김소연;박선주;신선정
    • 치위생과학회지
    • /
    • 제17권6호
    • /
    • pp.487-494
    • /
    • 2017
  • 본 연구는 국민건강영양조사 제4기와 제5기(2007년~2012년) 자료를 이용하였으며, 구강검진 조사자료가 제공되지 않은 2011년 자료를 제외하고, 20세 이상의 성인 11,643명을 대상으로 연도별 흡연 유형별 치주질환의 추이를 살펴보고, 치주질환에 영향을 주는 인자를 평가하였다. 5개년도를 통합한 자료에서는 비흡연자에 비해 직접흡연자는 단순, 다중 로지스틱 회귀분석 모두에서 치주질환이 있을 aOR이 1.78, 1.77이었으며(p<0.001), 연도별 경향성을 보았을 때, 여자에 비해 남자가 치주질환이 있을 aOR은 1.12로 나타났다(p<0.001). 연도별 흡연 유형에 따라 치주질환 유병률은 치주질환이 있는 집단에서 직접흡연자의 비율이 현저하게 증가추세를 보였다. 또한 주요인자를 보정한 연도별 흡연 유형과 치주질환의 관련성을 단변량 분석한 결과, 비흡연자에 비해 직접흡연자의 치주질환이 있을 aOR은 2007년도에 1.99로 가장 높게 나타났다. 반면에 간접흡연자가 비흡연자에 비해 치주질환이 있을 확률은 통계적으로 유의하지 않았다. 인구사회학적 변수와 임상적 변수를 보정한 다변량 로지스틱 분석결과, 2007년도를 제외하고는 치주질환 발생에 있어 직접흡연자의 위험비는 통계적으로 모두 유의하였다. 반면 치주질환 발생에 있어 간접흡연의 영향력은 2010년도에서만 1.68의 aOR로 통계적 유의성을 보였다(p=0.032). 결론적으로 본 연구를 통해 연도에 따라 간접흡연의 노출이 증가되고 있음을 간접적으로 예측할 수 있었고, 직접흡연자에 비해 통계적 영향력의 크기는 뚜렷하지 않지만 치주질환에 있어 위험인자로서 독립적으로 고려되어야 함을 확인할 수 있었다. 중대구강병인 치주질환의 다양한 위험요인을 규명하고, 이를 예방하기 위한 측면에서 간접흡연과 치주질환의 명확한 기전과 영향력 크기를 밝히기 위한 근거자료 마련이 지속화되어야 할 것이다.

달걀버섯 발생지의 환경특성 분석 (Analysis of Environmental Characteristics in Habitat of Amanita hemibapha)

  • 서홍덕;허태철;정성철;주성현;박현
    • 한국균학회지
    • /
    • 제39권3호
    • /
    • pp.164-170
    • /
    • 2011
  • 달걀버섯과 환경인자와의 관계를 구명하고자 광양, 청도, 대구 3곳에서 토양의 이화학적 특성, 식물상, 버섯상을 조사하여 비교 분석을 하였다. 달걀버섯 발생지의 토양은 모래의 비율이 높은 사질양토, 식양토로 나타났고, 토양 pH는 5.0전후로 나타나 달걀버섯이 호산성균임을 알 수 있었다. 토양유효인산은 우리나라의 산림토양보다 낮은 1.57~2.99 ppm으로 인산의 가용화가 이뤄지고 있음을 알 수 있었다. 전 질소는 0.09~0.34%로 대구지역이 가장 낮게 나타났고, 탄질율 16.3~18.5로 큰 차이가 나타나지 않았다. 양이온 치환용량은 광양과 청도지역이 유사한 수치를 나타냈으며 대구지역이 비교적 낮게 측정되었으며 11.62~19.36 $cmol^+$/kg의 범위를 나타냈고, 치환성양이온 중 $Ca^{2+}$는 광양과 청도지역이 비슷하며 대구지역보다 높게 나타났으며, $Mg^{2+}$는 비교적 높은 수치를 나타낸 대구, 청도, 광양 지역 순이며, $K^+$는 광양, 청도, 대구지역 순으로 크게 차이가 나지 않았다. $Na^+$ 역시 3곳 모두 비슷한 수치를 나타냈으며 그 중, 청도지역 수치가 가장 높았다. 범위는 $Ca^{2+}$ 1.21~2.3 $cmol^+$/kg, $Mg^{2+}$ 0.35~0.89 $cmol^+$/kg, $K^+$ 0.24~0.29 $cmol^+$/kg, $Na^+$ 0.18~0.21 $cmol^+$/kg로 나타났다. 이러한 영양물질과 탄수화물은 균근성 버섯이 식물과 직접적인 관계를 맺고 있으므로 식물, 토양, 균근의 여러 조건에 따라 그 수치가 유동적인 것을 알 수 있었다. 조사지역의 주요 식물로는 신갈나무, 졸참나무, 서어나무, 소나무 등이 나타났으며, 발생지 3곳 공통으로 참나무류가 관찰되었다. 조사지역의 버섯은 광양 8과 12종, 청도 8과 12종, 대구 조사지역에서 5과 10종이 발견되었으며, 달걀버섯과 같은 균근성 버섯으로는 마귀광대버섯, 그물버섯, 쓴맛그물버섯 등이 발견되었다. 식물상과 버섯상을 토대로 달걀버섯과의 상응분석 결과, 달걀버섯의 기주식물로는 활엽수인 신갈나무, 졸참나무, 서어나무, 굴참나무 등으로 추정할 수 있으며, 균근성 버섯인 청머루무당버섯, 마귀광대버섯, 뱀껍질광대버섯, 수원무당버섯과 유사한 기주식물을 가지는 것으로 추정된다.

정미기의 능률에 미치는 기계적 요인및 작동조건에 관한 연구 (Mechanical and Operational Factors Affecting the Efficiency of Rice Polishing Machines)

  • 노상하
    • Journal of Biosystems Engineering
    • /
    • 제1권1호
    • /
    • pp.15-15
    • /
    • 1976
  • In analyzing the operational characteristics of a rice whitening machine, the internal radial pressure of the machine was measured using strain gage equipment. Changes in cylinder and feed screw configurations, screen type, cylinder speed and counter-pressure levels were examined to determine their impact on the quality and quantity of milled rice and the performance of the machine. The results are summarized as follows: 1. The internal radial pressure in the whitening chamber varied with the surface condition of the grain being processed. During the first or second pass through the machine, pressure was relatively low, reached a maximum after two to three passes with combinations I and II, three to six with combination III and then began to fall. 2. The pitch of the feed screw and the size of the feed gate opening which determine the rate of entry of grain into the whitening chamber, appeared to be the most important factor aff-::cting the degree of radial pressure, quality and quantity of milled rice and the efficiency of the machine. Using a feed screw with a wide pitch (4.8cm), radial pressure was relatively high and head rice recovery ratio \vere quite low. In this case capacity and machine effic?iency were much higher than obtained when using a feed screw with a narrow pitch (2.3cm). Very significant responses in radial pressure, head rice recovery rates and machine capacity were observed with changes in cylinder speed and counter-pressure levels when using the wide pitch feed screw. 3. The characteristics of the screen which surrounds the whitening chamber had an important effect on whitening efficiency. The existence of small protuberances on the original screen resulted in significant increases in both machine capacity and efficiency but without a significant decrease in head rice recovery or development of excessive radial pressure. Further work is required to determine the effects of screen surface conditions and the shape of the cylinderical steel roller on the rate of bran removal, machine efficiency and recovery rates. The size of the slotted perforations 0:1 the screen affects total milled rice recovery. The opening size on the original screen was fabricated to accommodate the round shape of Japonica rice varieties but was not suitable for the more slender Indica type. Milling Indica varieties with this screen resulted in a reduction in total milled rice recovery. 4. An increase in cylinder speed from 380 to 820 rpm produced a positive effect on head rice recovery for all machine combinations at every level of counter-pressure used in the tests. Head rice recovery was considerably lower at 380rpm using a wide screw pitch when compared to the results obtained at speeds from 600 to 820 r.p.m. The effects of cylinder speed On radial pressure, capacity and machine efficiency showed contrasting results, depending on the width of the feed screw pitch. With a narrow feed screw pitch (2.3cm), a direct proportional relationship was observed bet?ween cylinder speed and both radial pressure and machine efficiency. In contrast, using a 4.8 centimeter pitch feed roller produced a series of inverse relationships between the above variables. Based on the results of this study it is recommended when milling Indica type long grain rice varieties that the cylinder speed of the original machine be increased from 500-600 rmp up to a minimum of 800 rpm to obtain a greater abrasive effect between the grain and the screen. The pitch of the feed screw should be also reduced to decr?ease the level of internal radial pressure and to obtain higher machine efficiency and increased quality of milled rice with increased cylinder speeds. Further study on the interaction between cylinder speed and feed screw pitch is recommended. 5. An increase in the counter pressure level produced a negative effect On the head rice recovery with an increase in radial pressure, capacity, and machine efficiency over all combinations and at every level of cylinder speed. 6. Head rice recovery rates were conditioned primarily by the pressure inside the whitening chamber. According to the empirical cha racteristics curve developed in this study, the relationships of head rice recovery ($Y_h$) and machine capacity ($Y_c$/TEX>) to internal radial pressure ($X_p$) followed an inverse quadratic function and a linear function respectively: $$Y_h^\Delta=\frac{1}{{1.4383-0.2951X_p^\ast+0.1425X_p^{\ast\ast}}^2} , (R^2=0.98)$$$$Y_c^\Delta=-305.83+374.37X_p^{\ast\ast}, (R^2=0.88)$$The correlation between capacity and power consumption per unit of brown rice expressed in the following exponential function: $$Y_c^\Delta=1.63Y_c^{-0.7786^\{\ast\ast}, (R^2=0.94)$$These relationships indicate that when radial pressure increases above a certain range (1. 6 to 2.0 kg/$cm^2$ based On the results of the experiment) head ricerecovery decrea?ses in a quadratic relation with a inear increase in capacity but without any decrease in power consump tion per unit of brown rice. On the other hand, if radial pressure is below the range shown above, power consumption increases dramatically with a lin?ear decrease in capacity but without significant increases in head rice recovery. During the operation of a given whitening machine, the optimum radial pressure range or the correct capacity range should be selected by controlling the feed rate and/or counter-pressure keeping in mind the condition of the grain, particulary the hardness. It was observed that the total number of passes is related to radial pessure level, feed rate and counter-pressure level. The higher theradial pressure the fewer num?ber of pass required but with decreased head rice recovery. In particular, when using high feed rates, the total number of passes should be increased to more than three by reducing the counter-pressure level to avoid decreaseases in head rice recovery (less than 65 percent head rice recovery on the basis of brown rice) at every cylinder speed. 7. A rapid rise in grain temperature seemed to have a close relationship with the pressure generated inside the whitening chamber and, subsequently with head rice reco?very rates. The higher the rate of increase, the lower were the resulting head rice recoveries.

염스트레스가 감자(Solanum tuberosum L.)의 건물, 환원당, 무기성분의 함량 및 조성에 미치는 영향 (Effects of Salt Stress on Dry Matter, Glucose, Minerals Content and Composition in Potato (Solanum tuberosum L.))

  • 임주성;김미옥;홍미순;김미숙;천충기;박영은;조지홍;조광수;장동칠;최장규;이종남
    • 한국환경농학회지
    • /
    • 제38권1호
    • /
    • pp.38-46
    • /
    • 2019
  • BACKGROUND: Salinity is one of the main environmental stresses deteriorating qualities as well as yields of food crops. This study was conducted to identify the effects of salt stress on dry matter ratio, glucose content, and mineral content and composition in potatoes (Solanum tuberosum L.). METHODS AND RESULTS: Four potato varieties were grown in plastic pots (diameter 20 cm and height 25 cm) with three salinity levels (EC: 1.0, 4.0, and 8.0 dS/m) in a glasshouse. Dry matter ratio, specific gravity, starch, and glucose content in tubers harvested at 90 days after sowing were analyzed. Also, mineral contents (T-N, T-C, $P_2O_5$, $K^+$, $Ca^{2+}$, $Mg^{2+}$, $Na^+$) in stem, leaf, and tuber were investigated and statistically analyzed for analysis of variance (ANOVA). Dry matter ratio, specific gravity, and starch content in tubers were reduced in all varieties as the salt concentration increased. Glucose content tended to decrease according to the salt concentration. In ANOVA analysis of mineral contents, there were significant differences in $K^+$ and $Mg^{2+}$ of leaf and stem, in $Na^+$ of leaf and tuber, and also in $Ca^{2+}$ of leaf by the interactions of variety and salinity. In the case of $K^+/Na^+$ and $Ca^{2+}/Na^+$, the stem was more sensitively influenced by the salt treatment than the leaf or the tuber. The $K^+/Na^+$ and $Ca^{2+}/Na^+$ decreased in leaf, stem, and tuber of four varieties, as the salt concentration became higher. The decreasing level varied according to the varieties. 'Kroda' and 'Duback' maintained relatively higher $K^+/Na^+$ and $Ca^{2+}/Na^+$ than 'Atlantic' or 'Goun' under the salt stress conditions. CONCLUSION: The composition and accumulation of minerals in potato plant as well as dry matter ratio, starch, and glucose contents were significantly influenced by salt stress. The respond patterns were different depending on the varieties and it was related to the salt tolerance among varieties.

황폐임야(荒廢林野)가 수해참상(水害慘狀)에 미치는 영향(影響) (천보산(天寶山)과 인접(隣接) 죽엽산(竹葉山)을 중심(中心)으로) (Influences of the devastated forest lands on flood damages (Observed at Chonbo and the neighbouring Mt. Jook-yop area))

  • 정인구
    • 한국산림과학회지
    • /
    • 제5권1호
    • /
    • pp.4-9
    • /
    • 1966
  • 1. On 13 September 1964 a storm raged for 3 hours and 20 minutes with pounding heavy rainfalls, and precipitation of 287.5 mm was recorded on that day. The numerous landslides were occured in the eroded forest land neighbouring Mt. Chunbo, while no landslides recorde at all on Mt. Jookyup within the premise of Kwangnung Experiment Station, the Forest Experiment Station. 2. Small-scalled Landslides were occured in 43 different places of watershed area (21.97 ha.) in which the survey had already been done, in and around Mt. Chunbo (378 m a.s.l.). The accumulated soil amount totaled $2,146,56m^3$ due to the above mentioned landslides, while soil accumulated from riverside erosion has reached to $24,168.79m^3$, consisting of soils, stones, and pebbles. However, no landslides were reported in the Mt. Jook yup area because of dense forest covers. The ratio of the eroded soil amount accumulated from the riversides to that of watershed area was 1 to 25. On the other hand, the loss and damage in the research area of Mt. Chonbo are as follows: 28 houses completly destroyed or missing 7 houses partially destroyed 51 men were dead 5 missing, and 57 wounded. It was a terrible human disaster However, no human casualties were recorded at all, 1 house-completly destroyed and missing, 2 houses-partially destroyed. Total:3 houses were destroyed or damaged, in The area of Mt. Jookyup 3. In the calculation of the quanty of accumulated soil, the or mula of "V=1/3h ($a+{\sqrt{ab}}+b$)" was used and it showed that 24, 168.79m of soil, sands, stones and pebbles carried away. 4. Average slope of the stream stood 15 at the time of accident and well found that there was a correlation between the 87% of cross-area sufferd valley erosion and the length of eroded valley, after a study on regression and correlation of the length and cross-area. In other works, the soil erosion was and severe as we approached to the down-stream, counting at a place of average ($15^{\circ}1^{\prime}$) and below. We might draw a correlation such as "Y=ax-b" in terms of the length and cross-area of the eroded valley. 5. Sites of char-coal pits were found in the upper part of the desert-like Mt. Chunbo and a professional opinion shows that the mountain was once covered by the oak three species. Furthermore, we found that the soil of both mountains have been kept the same soil system according to a research of the soil cross-area. In other words, we can draw out the fact that, originally, the forest type and soil type of both Mt. Chunbo (378m) and Mt. Jookyup (610m) have been and are the same. However, Mt. Chunbo has been much more devastated than Mt. Jookyup, and carried away its soil nutrition to the extent that the ratios of N. $P_2O_5K_2O$ and Humus C.E.C between these two mountains are 1:10;1:5 respectively. 6. Mt. Chunbo has been mostly eroded for the past 30 years, and it consists of gravels of 2mm or larger size in the upper part of the mountain, while in the lower foot part, the sandy loam was formulated due to the fact that the gluey soil has been carried and accumulated. On the hand, Mt. Jookyup has consitantly kept the all the same forest type and sandy loam of brown colour both in the upper and lower parts. 7. As for the capability of absorbing and saturating maximum humidity by the surface soil, the ratios of wet soil to dry soil are 42.8% in the hill side and lower part of the eroded Mt. Chunbo and 28.5% in the upper part. On the contrary, Mt. Jookyup on which the forest type has not been changed, shows that the ratio in 77.4% in the hill-side and 68.2% in the upper part, approximately twice as much humidity as Mt. Chunbo. This proves the fact that the forest lands with dense forest covers are much more capable of maintaining water by wood, vegitation, and an organic material. The strength of dreventing from carring away surface soil is great due to the vigorous network of the root systems. 8. As mentioned above, the devastated forest land cause not only much greater devastation, but also human loss and property damage. We must bear in mind that the eroded forest land has taken the valuable soil, which is the very existance of origin of both human being and all creatures. As for the prescription for preventing erosion of forest land, the trees for furtilization has to be planted in the hill,side with at least reasonable amount of aertilizer, in order to restore the strength of earth soil, while in the lower part, thorough erosion control and reforestation, and establishments along the riversides have to be made, so as to restore the forest type.

  • PDF

제주도(濟州道) 감귤원토양(柑橘園土壤)의 특성(特性)과 관리(管理) (Characteristics and management of citrus orchard soils in Jeju)

  • 박훈;유순호;홍순범
    • 한국토양비료학회지
    • /
    • 제8권3호
    • /
    • pp.135-152
    • /
    • 1975
  • 제주도(濟州道) 감귤원토양(柑橘園土壤)의 이화학적(理化學的) 특성(特性)과 과수(果樹)의 영양조사(營養調査)에 의(依)하여 다음과 같은 점들이 알려졌다. 1. 한라산려(漢拏山麗)의 대지(臺地)와 분석구(憤石口)에 위치(位置)하여 토양수분(土壤水分)이나 과원미세기상(果園微細氣象)에 지형(地形)의 영향(影響)이 클것같다 2. 배수(排水)가 잘되고 토심(土深)이 적으며 사력함량(砂礫含量)이 많고 고상율(固相率)이 적은에다가 강풍(强風)이 있어 토양(土壤)의 풍식(風蝕)과 토양수분(土壤水分)이 문제가 될 것이며 보비력(保肥力)과 보수력(保水力) 및 근발달(根發達)을 위해 토심확대(土深擴大)가 필요(必要)하다. 3. 토양유효(土壤有效) 수분함량(水分含量)은 유기물함량(有機物含量)과 고도(高度)의 유의정상관(有意正相關)을 보이며 점토(粘土)가 다음으로 기여하였다. 비닐 피복은 수분보존(水分保存), 풍식방지(風蝕防止) 동계지온상승(冬季地溫上昇) 등에 효과(效果)가 클 것으로 보였다. 4. 다량(多量)의 비정질(非晶質) 양성(兩性) 알로판 (Ampoteric Amorphous Allophane)은 인산(燐酸)의 고정(固定)과 양(陽)ion 용탈(溶脫)의 순환작용(巡環作用)에 의(依)하여 비효(肥效)가 결정(決定)되며 석회(石灰)와 인산(燐酸)의 심층시비(深層施肥)가 요망(要望)되며 고토(固定) 인산(隣酸)의 용출(溶出)이 재평가(再平價)되어야 할 것이다. 5. 비효(肥效)는 해초(海草)와 같은 유기물(有機物)에 의(依)하여 증대(增大)되며 춘계시비효과(春季施肥效果)가 적은것은 토양수분함량(土壤水分含量)과 관계(關係)가 큰것같다. 6. 엽분석(葉分析)은 N는 많으며 Mg는 충분하나 P, Ca가 부족(不足)하고 과실분석(果實分析)은 K가 부족(不足)하였다. 인산시용(燐酸施用)은 감미비(甘味比)를 증가(增加)시켰으며 K는 과피율(果皮率)을 감소시켰다. 7. Mn의 과잉과 부족(不足)증상이 부분적으로 나타났으며 Fe와 B는 문제가 없으며 Ca는 대부분 과잉이나 부족한 원(園)이 있으며 Zn도 부족(不足)한 곳이 보였다. 8. 암반(岩盤)을 제거한후 심토(心土)와 표토(表土)를 혼합(混合)하고 다량(多量)의 유기물(有機物)과 완용성비료(緩溶性肥料)를 시용(施用)하며 비닐피복을 하고 점적관개(點滴灌漑)를 하므로서 시비효과(施肥效果)가 발현(發現)되며 수량(收量)이 급증(急增)할 것으로 보인다.

  • PDF