• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 추계학술대회 논문집 전기물성,응용부문
• /
• pp.139-141
• /
• 2005

It is possble to study charge transfer property which is caused by height variation because we can see the organic materials barrier height and STM tip by organic materials energy band gap. Here, we investigated the negative differential resistance(NDR) and charge transfer property of self-assembled 4,4-Di(ethynylphenyl)-2'-nitro-1-(thioacetyl)benzene, which has been well known as a conducting molecule. Self-assembly monolayers(SAMs) were prepared on Au(111), which had been thermally deposited onto pre-treatment($H_{2}SO_{4}:H_{2}O_{2}$=3:1) Si. The Au substrate was exposed to a 1 mM/l solution of 1-dodecanethiol in ethanol for 24 hours to form a monolayer. After thorough rinsing the sample, it was exposed to a $0.1{\mu}M/1$ solution of 4,4-Di(ethynylphenyl)-2'-nitro-1-(thioacetyl)benzene in dimethylformamide(DMF) for 30 min and kept in the dark during immersion to avoid photo-oxidation. After the assembly, the samples were removed from the solutions, rinsed thoroughly with methanol, acetone, and $CH_{2}Cl_{2}$, and finally blown dry with $N_2$. Under these conditions, we measured electrical properties of self-assembly monolayers(SAMs) using ultra high vacuum scanning tunneling microscopy(UHV-STM). The applied voltages were from -1.50 V to -1.20 V with 298 K temperature. The vacuum condition is $6{\times}10^{-8}$ Torr. As a result, we found that NDR and charge transfer property by a little change of height when the voltage is applied between STM tip and electrode.

• IMMUNE NETWORK
• /
• 제6권2호
• /
• pp.76-85
• /
• 2006

Background: Chemotaxis is one of the cardinal functions of leukocytes, which enables them to be recruited efficiently to the right place at the right time. Analyzing chemotactic activities is important not only for the study on leukocyte migration but also for many other applications including development of new drugs interfering with the chemotactic process. However, there are many technical limitations in the conventional in vitro chemotaxis assays. Here we applied a new optical assay to investigate chemotactic activities induced in differentiated HL-60 cells. Methods: HL-60 cells were stimulated with 0.8% dimethylformamide (DMF) for 4 days. The cells were analyzed for morphology, flow cytometry as well as chemotactic activities by a time-lapse videomicroscopic assay using a chemotactic microchamber bearing a fibronectin-coated cover slip and an etched silicon chip. Results: Videomicroscopic observation of the real cellular motions in a stable concentration gradient of chemokines demonstrated that HL-60 cells showed chemotaxis to inflammatory chemokines (CCL3, CCL5 and CXCL8) and also a homeostatic chemokine (CXCL12) after DFM-induced differentiation to granulocytic cells. The cells moved randomly at a speed of $6.99{\pm}1.24{\mu}m/min$ (n=100) in the absence of chemokine. Chemokine stimulation induced directional migration of differentiated HL-60 cells, while they still wandered very much and significantly increased the moving speeds. Conclusion: The locomotive patterns of DMF-stimulated HL-60 cells can be analyzed in detail throughout the course of chemotaxis by the use of a time-lapse videomicroscopic assay. DMF-stimulated HL-60 cells may provide a convenient in vitro model for chemotactic studies of neutrophils.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제55권1호
• /
• pp.16-19
• /
• 2006

The characteristic of negative differential resistance(NDR) is decreased current when the applied voltage is increased. The NDR is potentially very useful in molecular electronics device schemes. Here, we investigated the NDR characteristic of self-assembled 4,4'-di(ethynylphenyl)-2'-nitro-1-benzenethiolate, which has been well known as a conducting molecule. Self-assembly monolayers(SAMs) were prepared on Au(111), which had been thermally deposited onto $pre-treatment(H_2SO_4:H_2O_2=3:1)$ Si. The Au substrate was exposed to a 1 mM/1 solution of 1-dodecanethiol in ethanol for 24 hours to form a monolayer. After thorough rinsing the sample, it was exposed to a 0.1 ${\mu}M/l$ solution of 4.4'-di(ethynylphenyl)-2'-nitro-1-(thioacetyl)benzene in dimethylformamide(DMF) for 30 min and kept in the dark during immersion to avoid photo-oxidation. After the assembly, the samples were removed from the solutions, rinsed thoroughly with methanol, acetone, and $CH_2Cl_2,$ and finally blown dry with N_2. Under these conditions, we measured electrical properties of self-assembly monolayers(SAMs) using ultra high vacuum scanning tunneling microscopy(UHV-STM). The applied voltages were from -2 V to +2 V with 298 K temperature. The vacuum condition was $6{\time}10^{-8}$ Torr. As a result, we found the NDR voltage of the 4,4'-di(ethynylphenyl)-2'-nitro-1-benzenethiolate were $-1.61{\pm}0.26$ V(negative region) and $1.84{\pm}0.33$ V(positive region). respectively.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 C
• /
• pp.1844-1846
• /
• 2005

The characteristic of negative differential resistance(NDR) is decreased current when the applied voltage is increased. The NDR is potentially very useful in molecular electronics device schemes. Here, we investigated the NDR property of self-assembled 4,4- Di(ethynylphenyl)-2'-nitro-1-(thioacetyl)benzene, which has been well known as a conducting molecule. Self-assembly monolayers(SAMs) were prepared on Au(111), which had been thermally deposited onto pre-treatment$(H_2SO_4:H_2O_2=3:1)$ Si. The Au substrate was exposed to a 1mM/l solution of 1-dodecanethiol in ethanol for 24 hours to form a monolayer. After thorough rinsing the sample, it was exposed to a $0.1{\mu}M/l$ solution of 4,4-Di(ethynylphenyl)-2'-nitro-1-(thioacetyl)benzene in dimethylformamide(DMF) for 30 min and kept in the dark during immersion to avoid photo-oxidation. After the assembly, the samples were removed from the solutions, rinsed thoroughly with methanol, acetone, and $CH_2Cl_2$, and finally blown dry with $N_2$. Under these conditions, we measured electrical properties of self-assembly monolayers(SAMs) using ultra high vacuum scanning tunneling microscopy(UHV-STM). The applied voltages were from -2V to +2V with 299K temperature. The vacuum condition is $6{\times}10^{-8}$ Torr. As a result, we found the NDR voltage of the nitro-benzene is $-1.61{\pm}0.26$ V(negative region) and $1.84{\pm}0.33$ (positive region), respectively.

• Advances in nano research
• /
• 제10권1호
• /
• pp.59-69
• /
• 2021

Electrospinning is a cost-effective and versatile method for producing submicron fibers. Although this method is relatively simple, at the theoretical level the interactions between process parameters and their influence on the fiber morphology are not yet fully understood. In this paper, the aim was finding optimal electrospinning parameters in order to obtain the smallest fiber diameter by using Taguchi's methodology. The nanofibers produced by electrospinning a solution of Thermoplastic Polyurethane (TPU) in Dimethylformamide (DMF). Polymer concentration and process parameters were considered as the effective factors. Taguchi's L9 orthogonal design (4 parameters, 3 levels) was applied to the experiential design. Optimal electrospinning conditions were determined using the signal-to-noise (S/N) ratio with Minitab 17 software. The morphology of the nanofibers was studied by a Scanning Electron Microscope (SEM). Thereafter, a tensile tester machine was used to assess mechanical properties of nanofibrous scaffolds. The analysis of DoE experiments showed that TPU concentration was the most significant parameter. An optimum combination to reach smallest diameters was yielded at 12 wt% polymer concentration, 16 kV of the supply voltage, 0.1 ml/h feed rate and 15 cm tip-to-distance. An empirical model was extracted and verified using confirmation test. The average diameter of nanofibers at the optimum conditions was in the range of 242.10 to 257.92 nm at a confidence level 95% which was in close agreement with the predicted value by the Taguchi technique. Also, the mechanical properties increased with decreasing fibers diameter. This study demonstrated Taguchi method was successfully applied to the optimization of electrospinning conditions for TPU nanofibers and the presented scaffold can mimic the structure of Extracellular Matrix (ECM).

• 공업화학
• /
• 제3권1호
• /
• pp.130-137
• /
• 1992

과산화벤조일을 개시제로 하여 클로로프렌 고무에 아크릴로니트릴(AN)과 스티렌(ST)을 그라프트 공중합하였다. 합성된 그라프트 공중합체는 초산에틸/n-헥산, 아세톤/메탄올 및 디메틸포름아미드/메탄을 혼합용매를 사용하여 추출 분리하였다. 얻어진 그라프트 공중합체인 아크릴로니트릴-클로로프펜-스티렌(ACS)수지는 IR분광법으로 구조를 확인하였다. 그라프트 공중합시의 스티렌 대 아크릴로니트릴 몰비,반응온도와 시간, 개시제농도, CR농도 및 용매의 영향을 고찰한 결과 그라프팅 효율은 [ST]/[AN] 몰비와 반응시간, 개시제 농도와 CR농도에 따라 증가하였다. 그라프트 공중합에서 클로도프렌의 농도는 9.6wt%, 단량체의 상대적 몰비, [ST]/[AN]=1.5, 반응시간은 40시간, 반응온도는 $70^{\circ}C$가 최적 반응조건이었다. 아울러 최적반응조건으로부터 합성되어진 그라프트 공중합체의 열적성질 난연성 내후성 및 morphology도 측정조사하였다. 그 결과 난연성과 내후성 및 열적 안정성이 기존의 ABS나 AES보다 개선되었다.

• 공업화학
• /
• 제18권6호
• /
• pp.568-574
• /
• 2007

투명결정화 유리의 전구체로서 균열이 없는 $Li_2O1{\cdot}7Al_2O_3{\cdot}8.6SiO_2$ 조성인 다공성 괴상 겔을 formamide를 첨가한 알콕시드 용액으로부터 sol-gel방법으로 합성하였다. 겔 합성에서 겔화 활성화 에너지, 비표면적, 습윤겔의 완전 탈수에 필요한 온도, 기공의 부피 및 기공크기와 분포를 측정하였고, 겔의 결정화온도를 검토하고자 시차열분석을 실시하였다. 겔화의 활성화에너지는 가수분해에 필요한 물의 첨가량에 따라 13~14 kcal/mol 범위를 나타내고, 물의 첨가량이 가수분해시 필요한 이론량의 3배 이상일 경우, $70{\sim}75^{\circ}C$, 건조속도 0.1~0.3 %/h에서는 겔의 균열을 방지할 수 있어 안정한 괴상 겔을 제조할 수 있었다. $180^{\circ}C$에서 건조한 겔체는 비표면적, 기공부피 및 기공크기분포는 $239.40m^2/g$, 0.001~0.03 mL/g 그리고 1~122 nm 반지름의 미세구조로 된 투명 겔체로서 다공질 물질임이 확인되었고, 건조겔의 시차열분석 결과 $800^{\circ}C$ 부근에서 1차 발열피크, $980^{\circ}C$ 부근에서가 2차 발열피크가 확인되어 결정화가 일어남을 알 수 있었다.

• 공업화학
• /
• 제19권4호
• /
• pp.413-420
• /
• 2008

전기방사에 대한 연구는 지난 10여 년간 의료, 산업용에 적합한 적용 기술 연구로 많은 발전을 하고 있다. 본 연구에서는 용액전기방사법으로 다중벽탄소나노튜브(MWNT)를 함유하는 폴리카보네이트(PC) 나노섬유와 복합필라멘트 섬유를 제조하였다. 폴리카보네이트 나노섬유 내에서의 분산성을 향상시키기 위하여 다중벽탄소나노튜브를 in-situ 방법으로 개질하였다. THF와 DMF의 혼합용매를 사용하여 다중벽 탄소나노튜브가 함유된 폴리카보네이트(PC/mMWNT) 나노섬유를 제조하였다. 제조된 PC/mMWNT 나노섬유의 TEM 사진 분석결과 다중벽 탄소나노튜브가 폴리카보네이트 나노섬유 내에 잘 분산되어 있음을 확인하였다. 또한, 다중벽탄소나노튜브의 함량이 증가할수록 순수 폴리카보네이트 섬유에 비해 열안정성이 우수하였으며, 표면저항기 측정결과 3 wt%와 5 wt%에서 109.1~109.5 ${\Omega}$의 대전방지효과를 기대할 수 있는 전기적 특성을 확인하였다. 또한 PC/mMWNT를 이용하여 제조된 멀티필라멘트 섬유는 SEM을 분석결과 직경 $60{\sim}100{\mu}m$, 길이 4~5 cm의 멀티필라멘트(Multi-Filament yarn)가 제조되었음을 확인하였다.

• 대한화학회지
• /
• 제32권3호
• /
• pp.203-210
• /
• 1988

물-아세톤, 물-아세토니트릴 및 물-디메틸포름아미드의 2성분 혼합용매중에서 한개의 산소다리로 된 이핵몰리브텐(V)착물, $[Mo_2O_3(Phen)_2(NCS)_4]$은 두개의 산소다리로 된 이핵 몰리브텐(V)착물, $[Mo_2O_4(Phen)_2(NCS)_2]$을 생성한다. $[Mo_2O_3(Phen)_2(NCS)_4]$가 $[Mo_2O_4(Phen)_2(NCS)_2]$로 바뀌는 속도는 분광광도법으로 측정하였다. 이 때 온도는 $10^{\circ}C$에서 $40^{\circ}C$, 압력은 1bar에서 1500bar로 변화시켰다. 속도상수는 물의 농도 증가에 따라 증가하였다. 수소이온농도의 증가에 따라서는 감소하였다. 여러가지 공용매에서 산소고리화 반응속도는 유전상수$({\varepsilon}/{\varepsilon}_0)$의 증가와 같이 ACT < AN < DMF의 순으로 증가하였다. 관찰된 음의 활성화엔트로피($[\Delta}S^{\neq}$), 활성화부피($[\Delta}V^{\neq}$) 및 활성화 압축율(${\Delta}{\beta}^{\neq}$) 값은 착물이 전이상태에서 용매 물분자를 강하게 당기는 회합성메카니즘임을 알게 한다.

• 한국산업보건학회지
• /
• 제6권2호
• /
• pp.209-221
• /
• 1996

The purpose of this study was to find a suitable cosolvent to $CS_2$ so that desorption efficiency can be improved for both polar and non-polar organic solvent mixtures collected on an activated charcoal tube. Cosolvents added to $CS_2$ include: DMF(N,N-dimethylformamide): $CS_2$ (v/v 1:99), DMF:$CS_2$(v/v 3:97), BC (butyl carbitol, 2-(2-butoxy ethoxy) ethanol):$CS_2$(v/v 1:99), and BC:$CS_2$(v/v 3:97)). The results obtained were as follows : 1. Comparing the desorption efficiency of $CS_2$ with those of $CS_2$ with 1, 3, 5 % DMF and 1, 3 % BC cosolvents for two different groups of charcoal tubes each containing 8 different polar and non-polar organic solvents with 3 different concentration levels, the desorption efficiencies of the cosolvent-added $CS_2$ increased significantly for all polar organic solvents regardless of concentration levels tested. For non-polar organic solvents, no noticeable improvement was detected except xylene and trichloroethylene. The desorption efficiency of xylene increased significantly while that of trichloroethylene increased significantly at the lowest concentration level tested. 2. Either 5 % DMF or 3 % BC was the most suitable cosolvent because the desorption efficiency for non-polar organic solvent mixtures was similar or slightly improved compared with that of $CS_2$, while those of for polar organic solvent mixtures were above 75 % except for cyclohexanone. 3. The smallest variations in desorption efficiency represented by the ratio calculated from the maximum to minimum desorption efficiency for all concentration levels tested were found when 3 % BC was used as a cosolvent. The above results indicate that the desorption efficiency of $CS_2$ particularly for polar organic solvent mixtures collected on a charcoal tube can be significantly improved by the use of cosolvents such as 5 % DMF or 3 % BC. A caution, however, is in order for selecting a cosolvent whenever the cosolvent itself is being used in the workplace or the impurities contained in the cosolvent may interfere with the analytical results. In addition, to improve desorption efficiencies for such organic solvents as cyclohexanone or ketones, it is recommended to use suitable collection and desorption media other than the traditional method of charcoal tube collection/$CS_2$ desorption.