• 한국군사과학기술학회지
• /
• 제10권1호
• /
• pp.94-100
• /
• 2007

MVRS's measuring principles are based on the Doppler principle. It measures the velocities near the muzzle using the doppler signal output from the antenna and then predicts the velocity of the bullet leaving the muzzle by performing the regression analysis on previous measured velocities. There are a number of error sources when calculating the muzzle velocity. Antenna has long term frequency stability error and the doppler signal from the antenna has noise. These two error sources influence the accuracy of estimated velocities from the doppler signal. Estimated velocity errors result in the random error of data statistics. And when performing a regression analysis these random error components are transferred to the fitting error component. This study also analyzed the error components according to the hardware limitations of MVRS-700 and the signal processing method, and presented the calculated uncertainty of muzzle velocity.

• 한국항행학회논문지
• /
• 제23권2호
• /
• pp.142-150
• /
• 2019

포구속도는 총포탄약의 평가에 있어 가장 중요한 계측항목들 중 하나이다. 포구속도는 포탄이 포구를 떠나는 시점의 속도로 정의된다. 특히, 포구속도는 추진제의 성능과 밀접하게 관련이 있기 때문에 정확한 측정이 요구된다. 포구속도의 측정에는 도플러 레이더가 사용되나, 도플러 레이더 신호의 품질은 시험장 환경에 의존한다. 따라서 본 논문에서는 도플러 레이더의 신호 품질을 악화시키는 클러터를 시험장 구조 및 신호처리 방법의 개선을 통해 제거하는 방법을 제시하였다. 개선된 신호처리 방법의 적용을 위해 도플러 레이더의 원시 도플러 데이터를 획득하는 프로그램을 작성하였다. 시험장 구조 및 신호처리 방법의 개선을 통해 얻어진 속도 데이터에 대한 통계적인 검증으로 제안하는 방법이 기존에 사용하던 방법에 비해 클러터 제거에 효과가 있음을 증명하였다.

• 한국군사과학기술학회지
• /
• 제16권5호
• /
• pp.639-645
• /
• 2013

The aim of the study is to investigate the method to estimate a storage life of propelling charge on the decrease of muzzle velocity by stochastic gamma process model. It is required to establish criterion for state failure to estimate the storage life and it is defined in this paper as a muzzle velocity difference between reference value and maximum allowable standard deviation multiplied by 6. The relationship between storage time and muzzle velocity is investigated by nonlinear regression analysis. The stochastic gamma process model is used to estimated the state distribution and the life distribution for storage time for 155mm propelling charge KM4A2 because the regression analysis is a deterministic method and it can't describe the distribution of life for storage time.

• 한국추진공학회지
• /
• 제12권5호
• /
• pp.60-66
• /
• 2008

각종 무기체계에서 포구속도는 보다 정확한 사격제원을 산출하기 위한 자동사격통제시스템의 기초 데이터로 활용될 수 있다. 그러나 전장환경의 여러 변수들을 고려한다 해도 동일한 탄약(추진제)에서 발생하는 불규칙적인 성능특성은 정확한 포구속도 데이터를 얻는 것을 곤란하게 한다. 본 논문에서는 강내 압력을 측정하고 약실압력과 탄저압력의 실험적 관계식을 구하여 포구속도를 산출하는 방법에 대하여 연구하였다. 이러한 방법을 통해 추진제의 불규칙적인 성능특성을 보정한 포구속도를 얻음으로써 보다 정확한 데이터를 제공할 수 있으리라 생각한다.

• Journal of Magnetics
• /
• 제18권2호
• /
• pp.90-94
• /
• 2013

We designed a model composed of a ring type magnet, a yoke, and a sensing coil embedded in a projectile for simulating the muzzle velocity. The muzzle velocity was obtained from the master curve for the induced voltage at sensing coil and the velocity as the projectile pass through the magnetic field. The induced voltage and the projectile's velocity are fitted by the $2^{nd}$ order polynomial. The skin effect difference between projectiles which consist of aluminum-aluminum and aluminum-steel was small. The projectile will surely be burst at the pre-determined target area using the flight time and the projectile muzzle velocity calculated from the voltage induced at the sensing coil on the projectile.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2009년도 제33회 추계학술대회논문집
• /
• pp.339-343
• /
• 2009

본 논문에서 155mm 자주포 K9에 사용되는 추진장약 K676의 포구속도 확률분포에 관하여 분석하였다. K676 추진장약의 로트별 수락시험으로 얻어진 포구속도 자료를 분석하였으며 각 시험탄의 포구속도는 기준탄의 사격결과 값으로 보정하였다. 최근까지 수행된 사격시험으로 얻어진 모든 시험값에 대하여 적합도 검정을 하였으며, 정규분포, 2모수 와이블분포 및 3모수 와이블분포 중 정규분포가 가장 적합한 확률분포임을 확인하였고 와이블분포도 충분히 활용할 만하다. 변동계수로부터 추진장약의 양산능력이 균일하게 유지되고 있음을 알 수 있다.

• 한국군사과학기술학회지
• /
• 제6권4호
• /
• pp.22-28
• /
• 2003

In the conventional weapon system, such as gun and small arms, it Is a general trend that for maximization of its performance and enhancement of its effectiveness, the firing control system(FCS) is developed and applied with the guns and small arms in the world. The FCS of the small arms for infantry man is composed of a few of sensors for acquisition of input data of FCS, such as range measurement, position sensing of weapon, temperature, etc., computer, displayer and power pack, and also the air burst munition is developed in parallel for the maximization of FCS's effectiveness. Since the flight time setting fuze for the air burst munition is adapted for next me, the measuring device of the muzzle velocity is needed to overcome the variation of muzzle velocity due to producing procedures and the differences of the using temperatures and so maintain the burst position accuracy This paper contained the technical information on the development of the measuring device of muzzle velocity, which designed in compact & light weight configuration with reliability and accuracy.

• 한국생산제조학회지
• /
• 제23권4호
• /
• pp.408-412
• /
• 2014

An electromagnetic launching system presents a viable projectile propulsion alternative with low cost and minimal environmental drawbacks. A coil gun system propels a projectile using an electromagnetic force and the system is mainly employed in military weapon systems and space launch systems. In this paper, we perform optimization design to improve the muzzle velocity by analyzing the sensitivity. The muzzle velocity, which is the most important design function variable, is affected by design variables including the number of axial turns in the electromagnetic coil, number of radial turns in the electromagnetic coil, initial distance between the projectile and the coil, inner radius of the electromagnetic coil, and length of the projectile. An orthogonal arrays matrix is configured, and a finite element analysis is performed utilizing the commercial electromagnetic analysis software MAXWELL. The muzzle velocity of the optimal design is 62.4% greater than that of the initial design.

• 한국군사과학기술학회지
• /
• 제24권4호
• /
• pp.401-407
• /
• 2021

To confirm the change of muzzle velocity and the most suitable probability distribution model of the 155 mm K9 howitzer barrel with chrome plating and changed rifling. Using a statistical program, the muzzle velocity were plotted on a normal distribution, a 2-parameter and 3-parameter Weibull distribution on a probability paper. Also, statistical parameters were estimated and muzzle velocity fitness test and probability of K676 charge were plotted. In both the chrome-plated with standard rifling and changed rifling for K9 barrel, the 2-parameter and 3-parameter Weibull distribution were skewed to the left compared to the normal distribution. It was confirmed that the muzzle velocity of the K9 barrel with chromium-plated is suitable for the normal distribution and 3-parameter Weibull distribution model.

• 제어로봇시스템학회논문지
• /
• 제5권1호
• /
• pp.88-94
• /
• 1999

This paper presents an accuracy evaluation method for muzzle velocity measurement systems. Among various measuring techniques, the solenoid coil scheme and the doppler radar scheme are considered due to their popularity in applications. The error sources are first identified and their effects on the accuracy of the measuring systems are quantified using mathmatical equations. The theoritic accuracy limits are then verified through comparison with experimental results. From the accuracy point of view, they turn out to be standard velocity measuring systems.