• Journal of the Korean Society for Heat Treatment
• /
• v.37 no.5
• /
• pp.215-220
• /
• 2024

Slip lines and dislocation structures developed by deformation at 77 K, 292 K and 500 K have been investigated by an optical microscope and a high-voltage electron microscope. Slip patterns after the deformation by 4-5% at 77 K and 500 K are compared. From the slip line geometry, operation of both primary and secondary {111} slips have been confirmed. However, the primary slip lines formed at 77 K appear coarser and more pronounced than those at 500 K. This indicates that a larger number of dislocations have moved on the same plane at 77 K. Another characteristic difference noted here is that the slip lines are straight and pass through the specimen from one end to the other at 77 K. On the contrary, slip lines are rather faint at 500 K. The typical change found at 77 K is the increase in the [$0{\bar{1}}1$] dipole dislocations and generation of the [$10{\bar{1}}$] screw dipoles upon increase in the strain from 1.2% to 5.2%. This is the indication that the straight dipole dislocations were formed by a pinning effect due to jogs generated by mutual cutting between primary and secondary dislocations. Extremely fine slip has been noted after deformation at 500 K indicating that the usual Frank-Read source is not operative at high temperatures due to the strong KW locking.

• Korean Journal of Construction Engineering and Management
• /
• v.6 no.3 s.25
• /
• pp.144-155
• /
• 2005

Since 1950s, the Korean housing market has continually experienced the chronicle lack of housing stock because of lower housing investment in comparison with a population explosion, prompt urbanization and rapid restructuring of family. The Korean housing market have thus been driven not by the pricing model by housing demand-supply chain but by the Korean housing policies focusing on the increase of housing supply and the living stability of the middle or low-income bracket. After all, repetitive economic vicious circle of housing price and the increase of unsold apartments aggravated the malfunction of the Korean housing market. Meanwhile, the Korean construction firms have exacerbated their profitability. Such terrible situations are mainly triggered by the Korean construction firms that weighed on the short-term profits and quick response of the government policy alterations rather than the prospect of housing market Therefore, this research focusing on the dynamics of housing market identified and classified the demand and supply elements that consist not only of housing system structures but also of the environmental elements that affect the structures. Based on the system thinking and traditional theory of consumer's choice, the interactions of these elements were constructed as a causal loop diagram that explains the mutual influences among housing subsystems with feedback loops. This paper describes and discusses about the causes of the dynamic changes in the Korean housing market. This study would help housing suppliers, including housing developers, construction firms, etc., to form a more comprehensive understanding on the fundamental issues that constitute the Korean housing market and thereby increasing their long term as well as minimizing the risk involved in the housing supply businesses.

• Journal of the Korean Society of Costume
• /
• v.58 no.2
• /
• pp.78-92
• /
• 2008

The mutual relationship between fashion and architecture and the similarities in their form and structure have been continuously debated over the decades, considering that both spheres are objects used in human life. Both spheres bring about the creation of three-dimensional space structures that are completed by the human body and material, based on a design targeted for people. The similarities between fashion and architecture in terms of form and structure have been debated by western architecture scholars focusing on the support that holds the garment's shape, the tailoring of a men's suit and also the material. The debate originates from the discussion of F. Th. Vischer, Kritische Gnge, and Gottfried Semper during the nineteenth century on the similarities between crinoline and the form of architecture and also the similarities between sewing and architecture. However, architects always regarded fashion as the inferior creative process that follows architecture in viewing the relationship between fashion and architecture. During the mid to end of the twentieth century, contrary to previous decades, the sense of fashion in architecture stood out, as an issue and a different approach was taken in discussing architecture that incorporates fashion. Accordingly, in the mid 1990's, architecture scholars such as Deborah Fausch and Mark Wigley began to conduct close observation of the mutual relationship between fashion and architecture from a more equal point of view. Notwithstanding, their point of view was still biased towards architectural standards. Commencing the Millennium, fashion has become the primary work of creation which leads style in all spheres, and under these circumstances this point of view has transferred from architecture to fashion when thinking about relationships between these spheres. The discussion on fashion and architecture form fashion's point of view is currently concentrated on the post 1990's phenomenon and illustrates the environment that is related to architecture. In general, the discussion is limited to determining a work of an individual designer as 'being architectural' when explaining the sculptural form of fashion. Therefore, this research aims to renew the discussion on twentieth century fashion design, which was neglected in any studies on observing architecture and fashion. The aim of this research is to classify the architectural paradigm of twentieth century fashion design and to observe the architectural forms of the respective eras. It is necessary to have a close observation of the architectural paradigm in twentieth century fashion design where support tools such as the crinoline was avoided and the form and functionality of the garment itself was emphasized. I will conduct this research by considering the architectural form shown in fashion as a practical three-dimensional creation that exists in space.

• Journal of Korea Technology Innovation Society
• /
• v.16 no.4
• /
• pp.937-953
• /
• 2013

The theoretical discussion of generation process and development directions of economic fluctuations are actively discussed. This study describes the economic changes applied to empirical research on economic volatility in Korea under the economic theory of network theory [Acemoglu, et al. 2012, 2010]. For the three years in 2000, 2005, and 2010, the network analysis were applied to industry input-output tables. The research results show that the network economic structures in Korea is shifted from a high connectivity among sectors to a lower connectivity. Also, the impact of key industries and the mutual connectivity of input and out among industrial sectors are weaken. Implications for industry and technology policy are derived form the study results.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.76.1-76.1
• /
• 2015

Optical resonances of metallic or dielectric nanoantennas enable to effectively convert free-propagating electromagnetic waves to localized electromagnetic fields and vice versa. Plasmonic resonances of metal nanoantennas extremely modify the local density of optical states beyond the optical diffraction limit and thus facilitate highly-efficient light-emitting, nonlinear signal conversion, photovoltaics, and optical trapping. The leaky-mode resonances, or termed Mie resonances, allow dielectric nanoantennas to have a compact size even less than the wavelength scale. The dielectric nanoantennas exhibiting low optical losses and supporting both electric and magnetic resonances provide an alternative to their metallic counterparts. To extend the utility of metal and dielectric nanoantennas in further applications, e.g. metasurfaces and metamaterials, it is required to understand and engineer their scattering characteristics. At first, we characterize resonant plasmonic antenna radiations of a single-crystalline Ag nanowire over a wide spectral range from visible to near infrared regions. Dark-field optical microscope and direct far-field scanning measurements successfully identify the FP resonances and mode matching conditions of the antenna radiation, and reveal the mutual relation between the SPP dispersion and the far-field antenna radiation. Secondly, we perform a systematical study on resonant scattering properties of high-refractive-index dielectric nanoantennas. In this research, we examined Si nanoblock and electron-beam induced deposition (EBID) carbonaceous nanorod structures. Scattering spectra of the transverse-electric (TE) and transverse-magnetic (TM) leaky-mode resonances are measured by dark-field microscope spectroscopy. The leaky-mode resonances result a large scattering cross section approaching the theoretical single-channel scattering limit, and their wide tuning ranges enable vivid structural color generation over the full visible spectrum range from blue to green, yellow, and red. In particular, the lowest-order TM01 mode overcomes the diffraction limit. The finite-difference time-domain method and modal dispersion model successfully reproduce the experimental results.

• Journal of Microbiology and Biotechnology
• /
• v.23 no.10
• /
• pp.1347-1356
• /
• 2013

Tricholoma matsutake, an ectomycorrhiza that has mutual relationships with the rootlet of Pinus denisflora, forms a fruiting body that serves as a valuable food in Asia. However, the artificial culture of this fungus has not been successful. Soil fungi, including T. matsutake, coexist with many other microorganisms and plants; therefore, complex microbial communities have an influence on the fruiting body formation of T. matsutake. Here, we report on the structures of fungal communities associated with the fairy ring of T. matsutake through the pyrosequencing method. Soil samples were collected inside the fairy ring zone, in the fairy ring zone, and outside the fairy ring zone. A total of 37,125 sequencing reads were obtained and 728 to 1,962 operational taxonomic units (OTUs) were observed in the sampling zones. The fairy ring zone had the lowest OTUs and the lowest fungal diversity of all sampling zones. The number of OTUs and fungal taxa inside and outside the fairy ring zone was, respectively, about 2 times and 1.5 times higher than the fairy ring. Taxonomic analysis showed that each sampling zone has different fungal communities. In particular, out of 209 genera total, 6 genera in the fairy ring zone, such as Hemimycena, were uniquely present and 31 genera, such as Mycena, Boletopsis, and Repetophragma, were specifically absent. The results of metagenomic analysis based on the pyrosequencing indicate a decrease of fungal communities in the fairy ring zone and changes of fungal communities depending on the fairy ring growth of T. matsutake.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.22 no.2
• /
• pp.117-136
• /
• 2020

The purpose of this study is to analyze changes in high-tech fashion along with the types and characteristics of high-tech fashion that have appeared recently providing diverse material for the fashion field. High-tech fashion requires such research to learn how much distance one has in one's life. It is also meaningful to predict what direction high-tech fashion research may be needed. For research methods, previous research and literary studies were considered and photographs in which high-tech techniques were used were collected using the keyword 'high-tech fashion'. High-tech fashion types can be organized into the four types of luminescent types, mutual interaction types, 3D printing fashion, and virtual fashion. The research results were as follows. First, luminescent fashion was an important expression method of high-tech fashion. Materials for luminescent fashion first started with LED electric wire connections and many methods have been attempted with the appearance of electrically conductive clothing material, such as luminescent lasers and beam projectors. Second, interactive high-tech fashion often appears as variable fashion. The work of Hussein Chalayan, which was combined with advanced technology, set up a base for variable type interactive high-tech fashion in the 2000s. As bioengineering technology has developed, fashion that interacts with the environment without an energy source has appeared and the interaction among fashion, people, and the environment can be seen. Third, diverse forms of expressiveness in virtual reality such as 3D CLO shows a great difference with past high-tech fashion. Simple and diverse attempts made through virtual fittings reduce the limitations of time and space, permit interaction, and add a sense of reality through speed and dynamic physical beauty. Fourth, 3D printed fashion expresses complex and detailed clothing material that is different from those before with the development of computer 3D modeling technology. Modeling that can imitate geometric and bio-engineered structures is possible and mysterious feelings are passed on to people through creative expressions.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.33 no.6
• /
• pp.483-489
• /
• 2011

Purpose: Craniofacial structure form results from the adaptation to morphologic and functional changes in their neighboring structures for a mutual balance. The purpose of this study is classification of maxillomandibular complex growth pattern follow by cranial base growth pattern. And this study is identifying the correlation between maxilla-mandibular complex growth pattern and orthodontic criteria. Methods: 142 Class III malocclusion patients had orthognathic surgery at Wonkwang University Dental Hospital during April 2004 to October 2010. Patients were divided into 4 groups and the correlation between cranial base and maxillomandibular growth patterns were evaluated. Results: There was a correlation between cranial base and maxillomandibular growth patterns. Positive relationships were found between the occlusal plane, Incisor mandibular plane angle, mandibular plane, positioning of pogonion and the saddle angle, indicating maxillary growth patterns. Negative relationships were found between SNA, SNB, maxillary incisor angle and saddle angle. Positive relationships were found between the ratio of the anterior and posterior cranium, positioning of pogonion and the percentage of cranial depth indicating mandibular growth patterns. Negative relationships were found between the occlusal plane, maxillary incisor angle, mandibular plane, mandibular angle and cranial depth. Conclusion: Cranial base and maxillofacial growth patterns were correlated and the classification should be adjusted before orthognathic surgery.

• Journal of Arbitration Studies
• /
• v.17 no.3
• /
• pp.31-56
• /
• 2007

The purpose of this thesis lies on building the foundation for the further activation of trade among the Northeast Asian countries such as South Korea, Japan, China, Russia, and North Korea through an analytical comparison of their arbitration systems. Further activation of trade cannot be reached without previously building safety measures on the negotiation of exports, the control on defective imported merchandise, the returns on investments, and the stable management of businesses. Throughout this thesis an analytical comparison of these five countries' most important areas on arbitration will be carried out. These areas are the arbitration laws and organizations; the structures of the laws; scope of arbitration; form of arbitration agreement, appointment of arbitratiors, place of arbitration, hearing, court assistance in taking evidence, governing law, decision making by panel of arbitrators, form and contents of awards, effective of award, recourse against award, recognition and enforcement of awards. etc. It was found in each of the areas cases to be identical, similar or verydifferent; also, cases unable to arbitrate. This phenomenon was found to occur due to the differences in political and economic systems and perception of arbitration among these countries. Additionally, this thesis points out what should each country do for its integration. It is also suggested the organization of a common arbitration research body to continue the efforts for raising the awareness, building trust, and mutual recognition among the countries to ultimately create a common arbitration system. Lastly, it is a personal will that this thesis will serve as the starting point for in depth researches in each of the presented areas.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.13 no.5
• /
• pp.173-181
• /
• 1993

Under natural conditions, rivers do not in general take straight courses but instead take winding courses. This is known as meandering of rivers. Meandering of rivers are so complicated because of the mutual interactions between flow and movable boundaries. In quantitative information, it is important to predict the future location of a river channel(channel migration) because in selecting a bridge site or a location of a road. It may be valuable to know the future impact of a nearby river on those structures. When the prediction model of the migration of channel is used in domestic rivers with high coefficient of river regime, it is rational to use the periodical dominant discharge (PDD), which is named firstly by the author, instead of the average discharge. According to the analysis of the erosion coefficient, the mean deviation on the channel migration, and the bed scour factor, it can bring shedding light on the fact that the discharge is one of the dominant components in channel migration. In project area, the discharge that can shift the channel is slightly greater than 6,000CMS. The prediction model of the migration of channel estimated the erosion coefficient, $E_0$ by the data from the South Han River. This estimated value from the South Han River was also used to predict the migration of the South Han River in year 2000.