• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.1032-1035
• /
• 2009

Several different production technologies for Low-Temperature Poly-Silicon (LTPS) have been proposed over the last years. However, finally the progress in Excimer-laser-based crystallization has lead to the best cost-to-performance ratio of LTPS manufacturing for use in active-matrix-based displays. In this paper, we report on recent and significant technical advances in light sources, optical beam deliveries and beam irradiation systems targeted at enabling ultra-uniform mura-free LTPS active-matrix backplanes while simultaneously lowering production costs and increasing throughput.

• Journal of Plant Biotechnology
• /
• v.6 no.2
• /
• pp.113-118
• /
• 2004

Somatic embryos were formed from calli obtained from axillary shoots (raised from nodal segments of glasshouse-grown plants under aseptic conditions), internodal segments (from in vitro-raised plants), and root and coty-ledonary leaf segments (from in vitro-raised seedlings) after 8 weeks of initial culture. Embryo formation was the highest (97.33%) from cotyledonary leaf callus on Mura-shige and Skoog's (MS) medium containing kinetin (KN) (3 mg/L). Somatic embryo induction was lesser with different combinations of auxins while it increased to 100% in internodal segment and cotyledonary leaf calli with 6-benzyladenine (BA) (2mg/L) along with 2,3,5-triiodobenzoic acid (TIBA) (2mg/L). The shoots were induced from somatic embryos raised from root, coty-ledonary leaf and internodal segment calli grown on MS medium containing BA in combination with indole-3-acetic acid (IAA). Maximum of 66.67% cultures formed shoots on MS medium containing BA (1mg/L) in combination with IAA (2mg/L). The shoots raised from somatic embryos were rooted on MS medium supplemented with indole-3-butyric acid (IBA) (2mg/L). The plantlets transferred to the field showed 70% survival rate after one year.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.244-244
• /
• 2010

최근 활발히 연구되고 있는 AMOLED는 평판 디스플레이 분야를 이끌어 갈 차세대 선두 주자로 크게 주목 받고 있다. AMOLED는 전압 구동 방식인 AMLCD와 다르게 전류 구동 방식으로 a-Si TFT 보다 LTPS-TFT 사용이 요구되며, 대면적 기판으로 갈수록 결정립의 균일도가 매우 중요한 인자로 작용한다. 현재 양산이 가능한 AMOLED는 핸드폰이나 15인치 TV정도로 크기가 소형이며 대형 TV나 컴퓨터 모니터 등을 양산하기 위해 많은 방법이 시도되고 있다. 양산체제에서 사용되는 결정화 방법으로는 ELC가 가장 많은 부분을 차지하고 있다. 그러나 레이저를 사용하는 ELC 방법은 대면적으로 갈수록 레이저 빔 자체의 불균일성, shot to shot 불균일성, 레이저빔 중첩의 부정확도 등으로 인한 균일도의 부정확성이 커짐으로 인한 mura 현상이 나타나고 레이저 장비의 사용에 대한 비용 부담을 피할 수 없다. 따라서 non-laser 방식에 결정화 방법이 요구되나 SPC 경우는 상대적으로 고온에서 장시간이 걸리고, MIC 뿐만 아니라 MIC 응용 방법들은 금속 오염에 대한 문제가 발생하고 있는 실정이다. 이러한 문제로 인하여 결정립 크기의 균일도가 우수한 다결정 실리콘 박막을 제조하는 신기술에 대한 필요성이 매우 높은 실정이다. 본 연구에서는 비정질 실리콘 박막 상부 혹은 하부에 도전층을 개재하고, 상기 도전층에 전계를 인가하여 그것의 주울 가열에 의해 발생한 고열로 비정질 실리콘 박막을 급속 고온 고상 결정화하는 방법에 관한 기술인 JIC (Joule-heating Induced Crystallization) 결정화 공정을 개발하였다. 본 공정은 상온에서 수 micro-second 내에 결정화를 수행하는 것이 가능하며 도전층과 실리콘 박막 사이에 barrier층 삽입를 통하여 금속 오염을 막을 수 있으며 공정적인 측면에서도 별도의 chamber가 필요하지 않는 장점을 가지고 있다. 본 논문에서는 JIC 결정화 공정 조건에 따른 결정화 기구 및 JIC poly-Si의 미세구조 및 물리적 특성에 관한 논의가 이루어질 것이다.

• Nuclear Engineering and Technology
• /
• v.53 no.8
• /
• pp.2640-2645
• /
• 2021

We report the development of a gamma-ray imaging device, named Large-Area Hybrid Gamma Imager (LAHGI), featuring high imaging sensitivity and good imaging resolution over a broad energy range. A hybrid collimation method, which combines mechanical and electronic collimation, is employed for a stable imaging performance based on large-area scintillation detectors for high imaging sensitivity. The system comprises two monolithic position-sensitive NaI(Tl) scintillation detectors with a crystal area of 27 × 27 cm² and a tungsten coded aperture mask with a modified uniformly redundant array (MURA) pattern. The performance of the system was evaluated under several source conditions. The system showed good imaging resolution (i.e., 6.0-8.9° FWHM) for the entire energy range of 59.5-1330 keV considered in the present study. It also showed very high imaging sensitivity, successfully imaging a 253 µCi ¹³⁷Cs source located 15 m away in 1 min; this performance is notable considering that the dose rate at the front surface of the system, due to the existence of the ¹³⁷Cs source, was only 0.003 µSv/h, which corresponds to ~3% of the background level.

• Journal of Species Research
• /
• v.11 no.4
• /
• pp.239-252
• /
• 2022

Afrolaophonte koreana sp. nov. is described from the intertidal zone of two sandy beaches on the south coast of Korea. This is the first record of the genus Afrolaophonte Chappuis, 1960 in the Northern Pacific. The new species is most similar to A. aequatorialis Cottarelli and Mura, 1981, described from the Maldives and subsequently also found in Papua New Guinea, but could be distinguished by numerous characters, including the segmentation of the third leg endopod in male, armature formula of the second leg in both sexes, length of caudal rami in both sexes, and length of some setae on the fourth leg in female. Afrolaophonte ensiger Wells and Rao, 1987 from the Andaman and Nicobar Islands is established as a junior subjective synonym of A. aequatorialis. To test previous phylogenetic hypotheses based on intuitive methods, a parsimony based cladistic analysis of 13 valid congeners is performed using 15 morphological characters and one outgroup. Only one of three previously proposed species-groups is supported with a synapomorphy, while one was clearly based on symplesiomorphies. Our current knowledge of morphology in this genus is not sufficient for postulating interspecific phylogenies, which also renders previous zoogeographical hypotheses untestable.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.7 no.6
• /
• pp.117-125
• /
• 1998

The paper attempts to estimate the incubation time of a cavity in the interface between a power law creep particle and an elastic matrix subjected to a uniaxial stress. Since the power law creep particle is time dependent, the stresses in the interface relax. The volume free energy associated with Helmholtz free energy includes strain energies caused by applied stress and dislocations piled up in interface(DPI). The energy due to DPI is found by modifying the result of Dundurs and Mura[4]. The volume free energies caused by both applied stress and DPI are a function of the cavity size(r) and elapsed time(t) and arise from stress relaxation in the interface. Critical radius $r^*$ and incubation time $t^*$ to maximise Helmholtz free energy is found in present analysis. Also, kinetics of cavity formation are investigated using the results obtained by Riede [7]. The incubation time is defined in the analysis as the time required to satisfy both the thermodynamic and kinetic conditions. Through the analysis it is found that 1) strain energy caused by the applied stress does not contribute significantly to the thermodynamic and kinetic conditions of a cavity formation, 2) in order to satisfy both thermodynamic and kinetic conditions, critical radius $r^*$ decreases or holds constant with increase of the time until the kinetic condition(eq. 2.3) is satisfied. there for the cavity may not grow right after it is formed, as postulated by Harris [15], and Ishida and Mclean [16], 3) the effects of strain rate exponent (m), material constant $\sigma$0, volume fraction of the particle to matrix(f)and particle size on the incubation time are estimated using material constants of the copper as matrix.

• Journal of Korea Multimedia Society
• /
• v.10 no.10
• /
• pp.1271-1283
• /
• 2007

To detect defect of FPD(flat panel displays) is very difficult due to uneven illumination on FPD panel image. This paper presents a method to detect various types of defects using the approximated image of the uneven illumination by B-spline. To construct a approximated surface, corresponding to uneven illumination background intensity, while reducing random noises and small defect signal, only the lowest smooth subband is used by wavelet decomposition, resulting in reducing the computation time of taking B-spline approximation and enhancing detection accuracy. The approximated image in lowest LL subband is expanded as the same size as original one by wavelet reconstruction, and the difference between original image and reconstructed one becomes a flat image of compensating the uneven illumination background. A simple binary thresholding is then used to separate the defective regions from the subtracted image. Finally, blob analysis as post-processing is carried out to get rid of false defects. For applying in-line system, the wavelet transform by lifting based fast algorithm is implemented to deal with a huge size data such as film and the processing time is highly reduced.

• Nuclear Engineering and Technology
• /
• v.38 no.3
• /
• pp.231-238
• /
• 2006

Whole-body exposure to high-dose radiation causes injury involving multiple organs that depends on their sensitivity to radiation. This acute radiation syndrome (ARS) is caused by a brief exposure of a major part of the body to radiation at a relatively high dose rate. ARS is characterized by an initial prodromal stage, a latent symptom-free period, a critical or manifestation phase that usually takes one of four forms (three forms): hematologic, gastrointestinal, or cardiovascular and neurological (neurovascular), depending upon the exposure dose, and a recovery phase or death. One of the most important factors in treating victims exposed to radiation is the estimation of the exposure dose. When high-dose exposure is considered, initial dose estimation must be performed in order to make strategy decisions for treatment as soon as possible. Dose estimation can be based on onset and severity of prodromal symptoms, decline in absolute lymphocyte count post exposure, and chromosomal analysis of peripheral blood lymphocytes. Moreover, dose assessment on the basis of calculation from reconstruction of the radiation event may be required. Experience of a criticality accident occurring in 1999 at Tokai-mura, Japan, showed that ARS led to multiple organ failure (MOF). This article will review ARS and discuss the possible mechanisms of MOF developing from ARS.

• IEIE Transactions on Smart Processing and Computing
• /
• v.6 no.1
• /
• pp.66-70
• /
• 2017

Radioactive materials are used in medicine, non-destructive testing, and nuclear plants. Source localization is especially important during nuclear decommissioning and decontamination because the actual location of the radioactive source within nuclear waste is often unknown. The coded-aperture imaging technique started with space exploration and moved into X-ray and gamma ray imaging, which have imaging process characteristics similar to each other. In this study, we simulated $21{\times}21$ and $37{\times}37$ coded aperture collimators based on a modified uniformly redundant array (MURA) pattern to make a gamma imaging system that can localize a gamma-ray source. We designed a $21{\times}21$ coded aperture collimator that matches our gamma imaging detector and did feasibility experiments with the coded aperture imaging system. We evaluated the performance of each collimator, from 2 mm to 10 mm thicknesses (at 2 mm intervals) using root mean square error (RMSE) and sensitivity in a simulation. In experimental results, the full width half maximum (FWHM) of the point source was $5.09^{\circ}$ at the center and $4.82^{\circ}$ at the location of the source was $9^{\circ}$. We will continue to improve the decoding algorithm and optimize the collimator for high-energy gamma rays emitted from a nuclear power plant.

• The Academic Congress of Korean Shoulder and Elbow Society
• /
• 2009.03a
• /
• pp.21-21
• /
• 2009

There are some patients who have traumatic anterior shoulder instability due to minor injuries like overhead activities. The purpose of this study was to clarify characteristic features of traumatic anterior shoulder instability due to minor injuries. According to the mechanism of injury in an initial dislocation, 83 shoulders that underwent the stabilizing surgery for traumatic anterior shoulder instability were divided into two groups. Traumatic group included patients who suffered from a fall or a direct injury. Minor injury group included patients who suffered from the other injury like overhead activity. General joint laxity, range of motion and laxity under anesthesia, and intraarticular findings were compared between two groups. The morphology of superior and middle glenohumeral ligaments, Bankart lesion, Hill-Sachs lesion, and partial articular surface tendon avulsion lesion were observed in arthroscopy. Minor injury group consisted of 19 shoulders with 8 males, 11 females and the mean age of 22.5 years. Traumatic group consisted of 64 shoulders with 52 males, 7 females and the mean age of 24.3 years. Female in minor injury group was significantly more than that in traumatic group. There was no difference in general joint laxity and intraarticular findings between two groups. Range of external rotation in injured side in minor injury group was significantly more than that in traumatic group. Inferior laxity in both sides in minor injury group was more than that in traumatic group. In conclusion, the traumatic anterior shoulder instability due to minor injuries might incline to occur the shoulder in female and with inferior laxity of shoulder.