• Textile Coloration and Finishing
• /
• v.13 no.4
• /
• pp.241-248
• /
• 2001

Natural indigo dyeing has been used mainly on cellulosic fibers and silk during the course of history in Korea. In order to extend the usage of this one of the most important natural dyes, its dyeability on wool fabrics has been studied to find out the optimum dyeing condition for wool fiber which is susceptible to alkaline medium. The dyeing method used was hydrosulphite vat of extracted dye. K/S values of dyed fabrics were investigated to analyze the dyeability of natural indigo on wool fibers and colors were measured through $L^*,\;a^*,\;b^*$ and Munsell Values. Highest K/S values were obtained at the temperature of 60(C and pH 7 to 8. The Munsell Values for hue of wool fabrics dyed with extracted indigo powder using hydrosulphite vat fell mostly in PB range. As the dyebath pH increased, blueness increased. Different dyeing conditions resulted in change of colors of dyed fabrics due to the difference in amounts of indigotin and indirubin contents within the dyed fiber as shown by HPLC.

• Korean Journal of Soil Science and Fertilizer
• /
• v.35 no.2
• /
• pp.77-86
• /
• 2002

Soil color characteristics were measured by a optical instrument, colorimeter, comparing with the conventional Munsell color chart and related to the chemical properties of soils. Total of the 67 experimental soils were taken from tobacco fields that located at Cheongwon, Enmseong, Boeun, Goesan, Jincheon, and Chungju countries in Chungbuk Province having the 29 soil series including Samgag. The values of L, a, and b measured by colorimeter were closely related with hue, value, and chroma of Munsell color chart, respectively, indicating the quantitative measurement of soil color characteristics. The standard deviations in measurement for L, a, and b values was smaller in soil sample passed by 0.5 mm sieve than 2 mm sieve, suggesting that soil particle size less than 0.5 mm was better condition for colorimeter measurement. The values of L and b measured by colorimeter showed a tendency to decrease as increase of soil moisture content but nearly on difference with moisture condition for the value of a. However, correlation coefficient between air dry samples and wet soil samples(soil moisture retension of -10 hPa) for measurements of L, a and b value were more than 0.9 showing the same tendency in measurement. Consequently, air dry soil passed by 0.5 mm sieve was recommended to desirable conditions for stable measurement by colorimeter. The measured values by colorimeter were significantly correlated with organic matter, CEC, exchangeable Ca and Mg, showing the highest correlation coefficient between L value and organic matter.

• Korean Institute of Interior Design Journal
• /
• no.27
• /
• pp.3-11
• /
• 2001

The CMYK is the mathematical color model and the Musell system is an intuitive color model. CMYK color model needs to be proposed in the information age. These two models need to be integrated for convenience of color design. This paper deals with CMRK values, which have appeared in interior design, in association with the Munsell code. Firstly, color samples have been extracted from the cases of interior design. Secondly, the CMRK values of the color sample and the Munsell code have been found. Thirdly, relationship between the CMRK values has been formularized in comparison with the Whelan's color pallette by using the regression method. This paper concludes by proposing the formular which can be used to develope color palette in further research.

• Textile Coloration and Finishing
• /
• v.2 no.2
• /
• pp.20-32
• /
• 1990

In this paper, a new method by Cubic Spline to analyze Munsell Value Function is proposed. The values calculated by this method are compared with ones by Judd's Polynomial and Cube Root Functions, etc. For performing these computation algorithms have been developed.

• Textile Coloration and Finishing
• /
• v.15 no.1
• /
• pp.1-7
• /
• 2003

To study the dyeability(ΔE value) and color depth of silk fabrics dyed with Impatiens balsamina extracts. its flower, leaf and stem was extracted by water. This paper investigated some experiments under the various dyeing conditions such as dyeing temperature, dyeing time, repetition of dyeing, dyeing pH with silk fabrics dyed with Impatiens balsamina extracts. The results obtained were as follows 1. It was found that $\lambda_{max}$ of silk fabrics dyed with Impatiens balsamina extract was 260nm and its flower, leaf , stem and different colored flower(white, pint violet) had same $\lambda_{max}$ at 260nm. 2. $\Delta{E}$ values were increased when dyeing temperature, repetition of dyeing and time was higher, value of munsell of silk fabrics dyed with Impatiens balsamina extract was Yellow-Red. But dyeing temperature, repetition of dyeing and time was higher, shifted to longer wavelenth side. 3. Silk fabric dyed with Impatiens balsamina extracts at acidic pH was colored reddish Yellow-Red, alkali bath colored yellowish Yellow-Red in silk fabrics dyed with Impatiens balsamina extract.

• Textile Coloration and Finishing
• /
• v.29 no.4
• /
• pp.268-275
• /
• 2017

As the substitute of synthetic coloring materials for hair dyeing, we selected some natural ones of three primary colors such as sappan wood, logwood(red), gardenia blue(blue) and amur cork tree(yellow). Mixed colorants and metallic mordanting technique were used to widen the color space of dyed samples. In view of similarity in morphological and chemical structure, wool was adopted as the reference material for human hair to evaluate the color properties of hair dyeing. The color properties of the dyed samples were evaluated by using CIE $L^*a^*b^*$ and Munsell color systems. The addition of an alum or ferrous mordants was effective to expand the color space of hair and to increase the colorfastness to washing and light more than the rating of 1. Displaying the dyed samples by using Munsell color system, better linearity of hue values between the dyed samples of wool and human hair was shown when alum mordant was used.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.32 no.11
• /
• pp.1750-1759
• /
• 2008

The purpose of this study was to comparatively analyze the color characteristics of the Japanese ethnic look advanced by Japanese and western designers in comparison with the actual traditional colors of Japan. The data determining the traditional colors of Japan was collected through a critical apparatus examination of 250 colors and the color data of what determines Japanese ethnic look was collected through an analysis of the clothing appearing in four fashion collections -Paris, Milan, London, and New York- from the 2004 S/S collections to the 2008 F/W collections. For the analysis of these colors, Photoshop was used with an RGB value measuring under 300dpi resolutions. The RGB values were then converted to H V/C values through Munsell Conversion 8.0.3, and they were analyzed using Munsell's 40 Hue and PCCS. The results of this study are as follows: Japanese designers are expressing their own aesthetic theory by designing fashions in traditionally Japanese hues. However, neutral colors and low-chroma tones appear more often than traditional colors. This study illustrates how these designers use color to reflect their inside ideals being oversensitive traditonal ideals. In contrast, western designers reflect more contemporary trends through the use of hues that more clearly reveal their preconception of the colors of the Orient rather than actual traditional Japanese colors. Moreover, these foreign designers tend to approach fashion design by the means of shape rather than color. Japanese designers systematically analyze and apply their own culture to contemporary fashion design. Their efforts serve as a good reference model for research on traditional culture and fashion design.

• Proceedings of the IEEK Conference
• /
• 2003.07e
• /
• pp.1767-1770
• /
• 2003

This paper proposes an algorithm that can reduce the estimation error of surface spectral-reflectance(SR) when using a conventional 3-band RGB camera. In the proposed method, the estimation error is reduced by using adaptive principle components (PCs) for each color region. To build an adaptive set of PCs, n SR populations are organized for n PC sets using the Lloyd quantizer design algorithm. The Macbeth Color Checker is utilized for the initial representative SR values for 1485 Munsell color chips as the total color population, then the Munsell chips arc divided into subsets with a set of corresponding adaptive PCs organized for each subset.

• Textile Coloration and Finishing
• /
• v.15 no.4
• /
• pp.32-38
• /
• 2003

To get the variety of color by natural dyeing, cotton and silk fabrics were dyed with natural indigo and safflower in turn. The two ways of dyeing processes were carried. First, silk and cotton fabrics were dyed repeatedly in safflower dyebath to five times to get the five fabrics dyed in different shades. And then indigo dyeing process was carried on the top of the dyed fabrics with safflower. In second way, the fabrics were dyed in five stages of shade by repetition of dyeing process in indigo dyebath. And then safflower dyeing was carried on the top of the dyed fabrics with indigo. When indigo dyeing process was added on the top of the fabrics dyed in five shades with safflower, the color differences decreased between five shades of fabrics, their color values got similar in hue, shade and chroma. When safflower dyeing process was added on the top of the fabrics dyed in five shades with indigo, the fabrics showed different hue of colors between red and blue of Munsell color circle such as RP, P and PB. Like almost of fabrics dyed with plants materials, the lightfastness and laundering fastness of dyed samples were poet and drycleaning fastness were good.

• Journal of Fashion Business
• /
• v.13 no.6
• /
• pp.61-75
• /
• 2009

The objective of this research is to the enhance the color function of work clothing : to research and analyze the hue and tone of work clothing colors to be used for machinery and heavy industries in national industrial complexes, Through this research, the color using problems which related with safety workers will be revealed. For this project, total 42 sets of work suits were sampled from 12 different companies in the machinery and construction industries in the national industrial complexes of Gyeongsang Namdo Province and 16 sets of work suits currently being sold in the market. The collected work suits samples were classified according to item types and design. Color measurements were taken thus: After calibration according to ASTM D1729 specifications of standardized configuration settings to match standardized luminous source D65(Daylight 6500K) in color cabinet BOTECK SuperLight-VI, the RGB values of the work suits were calculated using PANTONE Color Cue TX. The RGB values of the colors thus derived were converted into V/C values using the Munsell Conversion 9.0.6 and analyzed with Munsell's 10-color system and PCCS. The results were presented according to Munsell's color wheel and color and brightness distributions were expressed in table form, as well as presented as a tone map. Following analysis, color hue distribution was found to be concentrated around PB, and brightness distribution toward the low end and mid range of the scale. Saturation values were distributed mostly around the low end of the scale. Following color tone analysis according to PCCS, it became apparent that colors were mainly distributed around dkg, ltg, and g, at low- and mid-brightness and low-saturation. Therefore, it may be concluded that colors used in work suits in the machinery and heavy industries are mainly cool colors, at low- and mid-brightness and low saturation. It is conjectured that such colors were applied uniformly in the workplace in order to serve certain functions, such as concealment of stains and contamination. Therefore, it follows that the utilization of colors, among other functions served by working clothings, must be taken into consideration in order to enhance safety and efficiency.