• Proceedings of the IEEK Conference
• /
• 2003.11c
• /
• pp.15-19
• /
• 2003

In this paper, the bit error rate (BER) performance of the fast frequency hopping/M-ary frequency shift keying system using the clipper receiver is analyzed by using the characteristic function (CF) technique in the presence of n=1 band multitone jamming and additive white Gaussian noise environment. The CFs of the clipper receiver outputs are derived as a infinite series representation using Gamma function and Marcum's Q -function. The analytical results are validated with various simulation results. Performance comparisons with linear combining receiver are shown that the BER performance of the clipper receiver is much better than that of the linear combining receiver In addition, as the clipping level approaches to infinity, it is shown that the clipper receiver simply performs a linear combining without clipping and there exists an optimum value of diversity level (the number of hops per symbol) that maximizes the worst case BER performance of the clipper receiver.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.4B
• /
• pp.629-634
• /
• 2000

In this paper, we describe the structure of the DWMT (discrete wavelet multitone) transceiver for VDSL system. The DWMT transceiver consists of the transmultiplexer using cosine modulation filter bank (CMFB), time domain equalizer (TEQ) and frequency domain equalizer (FEQ) minimizing the effects of the transmission channel. For FEQ, we have expanded the conventional l-D linear transversal equalizer into 2-dimensions, i.e. time and subchannel axes and we have implemented it using the 2-dimensional LMS methods. In order to qualify the performance of FEQ, we have applied it to the DWMT based VDSL transceiver and the equalizer's performance is verified by simulation using the VDSL line test model specified by the ANSI T1E1.4 requirements.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.36S no.6
• /
• pp.30-36
• /
• 1999

Jamming is an important factor in the military satellite communication system. In this paper, link capacity and jamming margin of the DS-CDMA(Direct Sequence-Code Division Multiple Access) military satellite communication system are analyzed and calculated under a multitone jamming. The analysis was performed with two types of transponders loaded on a geosynchronous satellite. Calculation methods for link capacity and jamming margin were obtained. The results of the analysis show that capacity of a transponder which does modulation/demodulation, decoding/encoding in addition to despreading/respeading is twice as much as that of a tranponder which does despreading /respreading only.

• Proceedings of the IEEK Conference
• /
• 1999.06a
• /
• pp.49-52
• /
• 1999

In this paper, we describe the structure of the DWMT (discrete wavelet multitone) transceiver for VDSL system. The DWMT transceiver is basically consisted of the transmultiplexer using cosine modulation filter bank (CMFB), time domain equalizer (TEQ) and frequency domain equalizer (FEQ) minimizing the effects of the transmission channel. For FEQ, we expanded the general LMS algorithm to 2-dimensions: time and subchannel axes and examined the 2-dimensional LMS methods with the various array size.

• Proceedings of the Korean Information Science Society Conference
• /
• 2001.10c
• /
• pp.319-321
• /
• 2001

ADSL에서 사용되고 있는 DMT(Discrete Multitone)는 Multicarrier Modulation 기법으로 선로의 특성을 고려하여 고속의 bit-rate를 얻을 수 있다. 그러나 이러한 Multicarrier 신호의 문제점은 바로 높은 PAR(Peak-to-Average Ratio)로, 이 값을 줄이기 위해 여러 가지 기법이 사용되고 있다. 본 논문에서는 현재 PAR을 줄이기 위해 사용되고 있는 여러 기법에 대해서 설명하고, 그 기법들 중에서 PTS(Partial Transmit Sequence)를 개선한 새로운 알고리즘을 제시하여 성능평가를 통해 낮은 복잡도의 계산으로 PTS와 유사한 성능을 보임을 살펴본다.

• Journal of Electrical Engineering and information Science
• /
• v.2 no.4
• /
• pp.19-22
• /
• 1997

In this paper, we propose a new communciation scheme combining both MT modulation and DS-CDMA with a concatenated orthogonal/PN spreading sequence. This scheme incorporates the advantages of both DS-CDMA wit a concatenated sequence, and an MT modulation technique to combat the effect of a multipath fading channel. It is shown that he proposed system outperforms the MT-CDMA system with a convetional PN sequence.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.7 no.5
• /
• pp.418-429
• /
• 1996

The number of bits per message and the number of tones in the frequency-hopping sequence are determined by the available bandwidth and the data rate of each user. These parameters in turn determine the tone duration which strongly influences the vulnerability of the system to transmission distortions. In this paper, an address code which is assigned to each individual user was employed in order to reduce the collisions or hit. Also the frequency band is divided into several subbands and each user transmits multitone frequency per subband per chip. And the new system which is to increase the duration of each tone by increasing the total number of system frequencies that has been proposed. It is found that an optimum value bit, tone, number of frequencies per chirp can improve the err performance. This flexibility slightly increases maximum efficiecy and makes the the system less vulnerable to multipath delay. So, It is found that as the nuber of user increased 50%, the efficiency as a tuncion of the bandwidth to user'rate ratio improve 20%.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.1A
• /
• pp.167-177
• /
• 2000

In this paper, a new algorithm to design a time-domain equalizer (TEQ) for an xDSL system employing the discrete multitone (DMT) modulation is proposed. The proposed algorithm, derived by neglecting the terms whichdo not affect the performance of a DMT system in ARMA modeling, is shown to have similar performance tothe previous TEQ algorithms such as matrix inverse algorithm, fast algorithm, iterative algorithm, and inversepower method, even with the significantly lower computational complexity. In addition, since the proposedalgorithm requires only the received signal, the information on the channel impulse response or training sequenceis not needed. It is also shown that for the case where bridged tap is not included, the number of TEQ tapsrequired can be reduced to half(from 16 to 8) without affecting the overall performance. The performances of theproposed and previous TEQ algorithms are compared by applying them to ADSL environment.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.8
• /
• pp.1629-1637
• /
• 2003

In this paper, we analyzed the performance of a hybird DS/SFH(Direct­Sequency­Slow Frequency­Hopping) Spread Spectrum system with BFSK modulation over Nakagami­m fading channel with multitone jamming. The performance of the system was improved when a frequency bowing rate increased. In case that process gain of hybrid DS/SFH Spread Spectrum system to be fixed, the hybrid DS/SFH Spread Spectrum takes the low bit error probability than a DS Spread Spectrum system. Also, when the fading index m increases, the fading effect decrease, when the JSR(jamming to signal power ratio) increases ,the performance of a hybrid DS/SFH Spread Spectrum system improved than DS Spread Spectrum system. The result, we have been proved that performance of a hybrid DS/SFH Spread Spectrum was superior to DS Spend Spectrum system over Nakagami­m fading with tome jamming.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.8B
• /
• pp.1586-1592
• /
• 1999

In DWMT, CMFB is employed in the synthesis/analysis part. The CMFB uses filters of greater length than the DFT, resulting in reduced interference between the carriers. In addition, the CMFB system is computationally efficient and fast algorithms are available for their implementation. Traditional designs for the prototype filters of CMFB usually involve nonlinear optimizations. Thus the required design time is considerably large even for small filter orders. In this paper, a prototype filter design method for CMFB is presented using optimal window method. The design process is reduced to the optimization of a single parameter and consequently the required design time is much less than those of the existing methods. It is shown that the stopband performance of the proposed method is better than that of the Kaiser window method.