• Journal of Communications and Networks
• /
• 제12권6호
• /
• pp.529-532
• /
• 2010

Multi-carrier demultiplexer/demodulator (MCDD) in an on-board processing (OBP) satellite used for digital multimedia services has two typical architectures according to the channel demultiplexing procedure: Multistage multi-carrier demultiplexer (M-MCD) or poly-phase fast Fourier transform (PPF). During the channel demultiplexing, phase and quantization errors influence the performance of MCDD; those errors affect the bit error rate (BER) performance of M-MCD and PPF differently. In this paper, we derive the phase error variances that satisfy the condition that M-MCD and PPF have the same signal to noise ratio according to quantization bits, and then, with these results, analyze the BER performances of M-MCD and PPF. The results provided here may be a useful reference for the selection of M-MCD or PPF in designing the MCDD in an OBP satellite communications system.

• 전자공학회논문지A
• /
• 제31A권5호
• /
• pp.50-57
• /
• 1994

The analysis of the two-tone intermodulation distortion of multistage two-ports with gain and mismatching losses is presented with simplified two-port analyses and statistical viewpoint. The uncertainty obtained from unknown phase angles of the intermodulation distortion signals to the system designer is reduced using stochastic process, hence improving the accuracy of the solution. Based on the dc power dependance of third-order intercept point of each stage, the new efficient method for improving the total intercept point is also suggested with only the relation of dc power and available power gain criteria. Experimental verification on specific amplifiers used for cellular mobile communication comparing predicted and measured intercept points for various power conditions is presented.

• 대한기계학회논문집A
• /
• 제24권5호
• /
• pp.1193-1202
• /
• 2000

The paper describes the use of genetic algorithms (GA's) to the minimum weight design of stiffened composite panels for buckling constraints. The proposed design problem is characterized by mixture of continuous and discrete design variables corresponding to panel elements and stacking sequence of laminates, respectively. Design space is multimodal and non-convex, thereby introducing the need for global search strategies. Advanced strategies in GA's such as directed crossover, multistage search and separated crossover are adopted to improve search ability and to save computational resource requirements. The paper explores the effectiveness of genetic algorithms and their advanced strategies in designing stiffened composite panels under various uniaxial compressive load conditions and the linrlit on stacking sequence of laminates.

• Earthquakes and Structures
• /
• 제15권2호
• /
• pp.215-225
• /
• 2018

To reach a better foundation treatment project, an optimized analysis of composite foundation was studied in the field of hydraulic engineering. Its unique characteristics in hydraulic engineering were concluded. And, the overall and detailed analysis of the composite foundation model established was carried out. The index parameters of the vertical reinforced rigid pile composite foundation were formulated. Further, considering the unique role of cushion in hydraulic engineering, its penetration and regularity were analyzed. Then, comparative and optimized analyses of cushion multistage physical dimensions and multistage material characteristics were established. The parameters of the piles distance were optimized and the multilevel scientific and reasonable parameters information was obtained. Based on the information of these parameters, the practical application was verified. It effectively supported the effective application of vertical reinforcement rigid pile composite foundation in hydraulic engineering. The service mechanism of composite foundation was fully analyzed.

• Journal of Magnetics
• /
• 제20권4호
• /
• pp.413-420
• /
• 2015

In this study, we present a comparison of multistage axial flux permanent-magnet machines (AFPMs) with different topologies for use as 100 W-class portable generating systems. Three topologies were selected, and the maximum power density and high level of efficiency were achieved by following the response surface methodology (RSM) in the design. Three-dimensional finite element analysis (FEA) was used to conduct numerical experiments to obtain the optimum design using the RSM and suggest a proper configuration of the portable generating system.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1997년도 춘계학술대회논문집
• /
• pp.77-80
• /
• 1997

The torsion tests in the range of 900~110$0^{\circ}C$, 5.0$\times$10-2~5.0$\times$100/sec were performed to study the recry stallization behavior of 304 stainless steel in the high temperature multistage deformation. The no-recrystallization temperature(Tnr) and fractional softening(FS) were determined by the change of flow curves. The inflection points of stress slope were moved to lower temperature area as the strain rate and the interrupt time were increased. From the multipass flow curve, the intersection between pass stress and FS curve was corresponding to the pass which the FS dropped abruptly and it was shown that the recrystallization area could be determined by the FS measurement in multipass deformation.

• 한국통신학회논문지
• /
• 제14권6호
• /
• pp.675-685
• /
• 1989

상호접송망은 병렬처리 시스템에서 매우 중요한 부분이다. 최근 다단상호 접속망에 대한 연구가 많이 행해지고 있다. 본 논문에서는 회선스위칭 다단상호접속망의 시뮬레이션 방법을 확장하여 분할된 ADM/IADM 접속망의 성능 평가를 하였다. 시뮬레이션 데이터에 의하여, 적용된 분할 방법에 의한 접속망 성능과 접속망에서 사용된 저지처리방식에 의한 접속망 성능 간의 관계를 보였다. 분석 결과, hold 방식을 사용하는 IADM 접속망이 RST 면에서 가장 나은 접속망 동작을 보이는 것으로 나타났다.

• 한국통신학회논문지
• /
• 제12권4호
• /
• pp.357-364
• /
• 1987

본 논문에서는 다중프로세서 시스템을 구성하는 중요한 요소인 다단상호결합 네트웍의 성능을 고찰한다. Baseline 네트웍을 이용한 Star네트웍 시스템의 Hardware적인 구성을 고찰하며 Analytical Model로 Request가 받아들여질 확률과 Clustering 확률을 구한다. 그리고 Baseline네트웍 대신에 Delta네트웍을 이용하여 위에서 언급한 확률을 구한 다음 네트웍의 성능을 비교한다.

• 대한산업공학회지
• /
• 제11권2호
• /
• pp.75-85
• /
• 1985

The application of GT results in the mass production effect to multi-product, small lot-sized production. Group scheduling, which is operations scheduling based on the GT concept, is analyzed in a multistage manufacturing system. But the research has been limited in independent setup time models. A heuristic algorithm has been developed to minimize the mean flow time when setup times are dependent to sequence of group in multistage. For evaluation of the heuristic algorithm, the solution of heuristic algorithm is compared with that of random scheduling. The result of comparison indicates that the proposed heuristic algorithm provides good solutions with relatively fewer computational effort.

• 한국정보과학회:학술대회논문집
• /
• 한국정보과학회 1999년도 가을 학술발표논문집 Vol.26 No.2 (3)
• /
• pp.244-246
• /
• 1999

본 논문에서는, multiple-buffered crossbar 스위치를 이용한 다층 연결 망의 성능 분석 모형을 제안하고, 스위치에 장착된 buffer의 개수 증가에 따른 성능 향상 추이를 분석하였다. Buffered 스위치 기법은 다층 연결 망 (Multistage Interconnection Network, MIN)의 내부의 데이터 충돌 문제를 효과적으로 해결할 수 있는 방법으로 알려져 있다. 제안된 성능 분석 모형은 먼저 네트웍 내부 임의 스위치 입력 단에 유입되는 데이터 패킷이 buffered 스위치 내부에서 전송되는 패턴을 확률적으로 분석하여 수립하였다. 분석 모형의 수학적 복잡도 절감을 위하여 확률식 유도 과정에 정상상태 확률 rosa(steady state probability)을 도입하였다. 제안한 모형은 스위치의 크기 및 스위치에 장착된 buffer의 수와 무관하게 확대 적용이 가능하다. 제안한 수학적 성능 분석 연구의 실효성 검증을 위하여 병행된 시뮬레이션 처리 결과는 상호 미세한 오차 범위 내에서 모형의 예측 데이터와 일치하는 결과를 보여 분석 모형의 타당성을 입증하였다. 2$\times$2 스위치로 구성된 8$\times$8 MIN을 대상으로 분석을 시행한 결과 스위치에 2~4개의 buffer를 장착했을 경우 unbuffer 스위치 경우와 비교하여 네트웍 정상상태 Throughout의 증가율이 높고 네트웍 Delay 또한 낮아져 효율적인 것으로 나타났다. 따라서 2~2 crossbar 스위치로 구성된 MIN의 경우 스위치에 장착된 buffer의 개수가 네 개 정도일 경우가 가격 대 성능비 면에서 가장 유리한 것으로 연구되었다.