• Proceedings of the KSRS Conference
• /
• 1998.09a
• /
• pp.565-568
• /
• 1998

In this paper, we propose a new method for multispectral image compression that is based on highly correlated relational properly taken from a spatial image and its wavelet transform. The highly active regions, such as edges or contour, in the spatial domain are appeared as significant coefficients in the wavelet transform domain; and the low active regions like background as insignificant. These characteristics play an important role in designing the system. The simulation results have shown us that the proposed method has better performance in terms of the reconstructed image quality and the transmitted bit rakes. Practically, our system can be successfully applied to the application areas that require of progressive transmission. For some multispectral images with relatively low activity, we have obtained the more good results.

• Korean Journal of Remote Sensing
• /
• v.38 no.2
• /
• pp.167-177
• /
• 2022

In order to obtain satellite image products using the image transmitted to the ground station after capturing the satellite images, many image pre/post-processing steps are involved. During the pre/post-processing, when converting from level 1R images to level 1G images, geometric correction is essential. An interpolation method necessary for geometric correction is inevitably used, and the quality of the level 1G images is determined according to the accuracy of the interpolation method. Also, it is crucial to speed up the interpolation algorithm by the level processor. In this paper, we proposed a lightweight CNN-based interpolation method required for geometric correction when converting from level 1R to level 1G. The proposed method doubles the resolution of satellite images and constructs a deep learning network with a lightweight deep convolutional neural network for fast processing speed. In addition, a feature map fusion method capable of improving the image quality of multispectral (MS) bands using panchromatic (PAN) band information was proposed. The images obtained through the proposed interpolation method improved by about 0.4 dB for the PAN image and about 4.9 dB for the MS image in the quantitative peak signal-to-noise ratio (PSNR) index compared to the existing deep learning-based interpolation methods. In addition, it was confirmed that the time required to acquire an image that is twice the resolution of the 36,500×36,500 input image based on the PAN image size is improved by about 1.6 times compared to the existing deep learning-based interpolation method.

• Korean Journal of Remote Sensing
• /
• v.36 no.6_2
• /
• pp.1605-1613
• /
• 2020

The tidal channel is a coastal sedimentary terrain that plays the most important role in the formation and development of tidal flats, and is considered a very important index for understanding and distribution of tidal flat sedimentation/erosion terrain. The purpose of this study is to understand the changes in tidal channels by a period after the opening of the floodgate of the seawall in the reclaimed land of Sihwa Lake using KOMPSAT high-resolution multispectral satellite image data and to evaluate the applicability and efficiency of high-resolution satellite images. KOMPSAT 2 and 3 images were used for extraction of the tidal channels' lineaments in 2009, 2014, and 2019 and were applied to supervised classification method based on Principal Component Analysis (PCA), Artificial Neural Net (ANN), Matched Filtering (MF), and Spectral Angle Mapper (SAM) and band ratio techniques using Normalized Difference Water Index (NDWI) and MF/SAM. For verification, a numerical map of the National Geographic Information Service and Landsat 7 ETM+ image data were utilized. As a result, KOMPSAT data showed great agreement with the verification data compared to the Landsat 7 images for detecting a direction and distribution pattern of the tidal channels. However, it has been confirmed that there will be limitations in identifying the distribution of tidal channels' density and providing meaningful information related to the development of the sedimentary process. This research is expected to present the possibility of utilizing KOMPSAT image-based high-resolution remote exploration as a way of responding to domestic intertidal environmental issues, and to be used as basic research for providing multi-platform-image-based convergent thematic maps and topics.

• Proceedings of KOSOMES biannual meeting
• /
• 2006.05a
• /
• pp.47-52
• /
• 2006

The cultural grounds of laver has been surveyed using SPOT-5 satellite images to calculate the facilities of laver cultivation area in the coastal waters of Korea 10m resolution multispectral images of SPOT-5 are adopted for the south area of Daebu Island, Hwaseong city to develop an automatic detection approach of laver nets that consists of the following: band difference technique, canny edge detector and morphological analysis. The satellite-based facilities number was relatively high as compared with the licensed number in 2005, 676,749 chaek and 572,745 chaek(柵, unit of measure for laver farm), respectively. The data could be applied to achieve a good harvest for laver seaweed growers and to control its national production keeping a stable market price for the government body.

• Korean Journal of Remote Sensing
• /
• v.25 no.6
• /
• pp.517-529
• /
• 2009

Many satellite image fusion techniques have been developed in order to produce a high resolution multispectral (MS) image by combining a high resolution panchromatic (PAN) image and a low resolution MS image. Heretofore, most high resolution image fusion techniques have used IKONOS and QuickBird images. Recently, GeoEye-1, offering the highest resolution of any commercial imaging system, was launched. In this study, we have experimented with GeoEye-1 images in order to evaluate which fusion algorithms are suitable for these images. This paper presents compares and evaluates the efficiency of five image fusion techniques, the $\grave{a}$ trous algorithm based additive wavelet transformation (AWT) fusion techniques, the Principal Component analysis (PCA) fusion technique, Gram-Schmidt (GS) spectral sharpening, Pansharp, and the Smoothing Filter based Intensity Modulation (SFIM) fusion technique, for the fusion of a GeoEye-1 image. The results of the experiment show that the AWT fusion techniques maintain more spatial detail of the PAN image and spectral information of the MS image than other image fusion techniques. Also, the Pansharp technique maintains information of the original PAN and MS images as well as the AWT fusion technique.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.36 no.6
• /
• pp.589-599
• /
• 2018

The land cover map has been produced by using satellite and aerial images. However, these two images have the limitations in spatial resolution, and it is difficult to acquire images of a area at desired time because of the influence of clouds. In addition, it is costly and time-consuming that mapping land cover map of a small area used by satellite and aerial images. This study used multispectral camera-based drone to acquire multi-temporal images for orthoimages generation. The efficiency of produced land cover map was evaluated using time series analysis. The results indicated that the proposed method can generated RGB orthoimage and multispectral orthoimage with RMSE (Root Mean Square Error) of ${\pm}10mm$, ${\pm}11mm$, ${\pm}26mm$ and ${\pm}28mm$, ${\pm}27mm$, ${\pm}47mm$ on X, Y, H respectively. The accuracy of the pixel-based and object-based land cover map was analyzed and the results showed that the accuracy and Kappa coefficient of object-based classification were higher than that of pixel-based classification, which were 93.75%, 92.42% on July, 92.50%, 91.20% on October, 92.92%, 91.77% on February, respectively. Moreover, the proposed method can accurately capture the quantitative area change of the object. In summary, the suggest study demonstrated the possibility and efficiency of using multispectral camera-based drone in production of land cover map.

• Korean Journal of Remote Sensing
• /
• v.27 no.3
• /
• pp.353-357
• /
• 2011

Although the intensity-hue-saturation (IHS) method for pan-sharpening has a spectral distortion problem, it is a popular method in the remote sensing community and has been used as a standard procedure in many commercial packages due to its fast computing and easy implementation. Recently, IHS-like approaches have tried to overcome the spectral distortion problem inherited from the IHS method itself and yielded a good result. In this paper, a similar IHS-like method with least squares for WorldView-2 pan-sharpening is presented. In particular, unlike the previous methods with three or four-band multispectral images for pan-sharpening, six bands of WorldView-2 multispectral image located within the range of panchromatic spectral radiance responses are considered in order to reduce the spectral distortion during the merging process. As a result, the new approach provides a satisfactory result, both visually and quantitatively. Furthermore, this shows great value in spectral fidelity of WorldView-2 eight-band multispectral imagery.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.216-218
• /
• 2003

QuickBird satellite is quickly becoming the best choice for high-resolution mapping using satellite images. In this paper, we will describe the followings: (1) how to correct QuickBird data using different geometric correction methods, (2) data fusion using QuickBird panchromatic and multispectral data, and (3) automatic DEM extraction using QuickBird stereo data.

• Korean Journal of Remote Sensing
• /
• v.35 no.6_2
• /
• pp.1095-1106
• /
• 2019

Damage of forest fire should be investigated quickly and accurately for recovery, compensation and prevention of secondary disaster. Using remotely sensed data, burn severity is investigated based on the difference of reflectance or spectral indices before and after forest fire. Recently, the use of high resolution satellite and UAV imagery is increasing, but it is not easy to obtain an image before forest fire that cannot be predicted where and when. This study tried to analyze availability of high-resolution images and supervised classifiers on the burn severity classification. Two supervised classifiers were applied to the KOMPSAT-3A image and the UAV multispectral image acquired after the forest fire. The maximum likelihood (MLH) classifier use absolute value of spectral reflectance and the spectral angle mapper (SAM) classifier use pattern of spectra. As a result, in terms of spatial resolution, the classification accuracy of the UAV image was higher than that of the satellite image. However, both images shown very high classification accuracy, which means that they can be used for classification of burn severity. In terms of the classifier, the maximum likelihood method showed higher classification accuracy than the spectral angle mapper because some classes have similar spectral pattern although they have different absolute reflectance. Therefore, burn severity can be classified using the high resolution multispectral images after the fire, but an appropriate classifier should be selected to get high accuracy.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.724-726
• /
• 2003

Currently available image fusion methods are not efficient for fusing the Landsat 7 images. Significant color distortion is one of the major problems. In this paper, using the well-known wavelet based method for data fusion between high-resolution panchromatic and low-resolution multispectral satellite images, we performed Landsat 7 image fusion. Based on the experimental results obtained from this study, we analyzed some reasons for color distortion. A new approach using the biorthogonal wavelets based method for data fusion is presented. This new method has reached an optimum fusion result - with the same spectral resolution as the multispectral image and the same spatial resolution as the panchromatic image with minimum artifacts.