• 제목/요약/키워드: Multiplication

검색결과 1,873건 처리시간 0.046초

상추잎 즙액과 표면에서 Escherichia coli O157:H7의 생장 가능성 (Growth Potential of Escherichia coli O157:H7 in Lettuce Leaf Extract and on Lettuce Leaf Surface)

  • 김원일;정향미;김세리;박경훈;김병석;윤혜정;윤종철;류경열
    • 한국식품위생안전성학회지
    • /
    • 제26권4호
    • /
    • pp.296-301
    • /
    • 2011
  • 본 연구에서는 식중독을 일으키는 병원균인 Escherichia coli O157:H7이 주요 소비 엽채류인 상추에서의 생장 가능성과 온도대별 생장변화를 구명하기 위하여 상추잎 즙액 에서 E. coli O157:H7의 생장, 상추잎 표면에서의 생장, 여러 가지 온도조건하의 상추잎 즙액 및 표면에서 E. coli O157:H7의 생장, 초기 접종 농도별 생장패턴을 조사하였다. E. coli O157:H7은 상추잎 즙액에서 20시간 이내에 밀도가 증가하였고 상추잎 즙액의 농도에 따라 병원균의 생장률은 다르게 나타났다. 조사기간 동안 $4^{\circ}C$ 조건에서는 E. coli Ol57:H7 밀도가 크게 변하지 않았고 $15^{\circ}C$ 이상의 조건에서는 10시간 이내에 밀도가 증가승하는 것을 확인할 수 있었다. 상추잎 표면에서도 E. coli Ol57:H7의 밀도는 초기 접종 밀도에 비해 증가하였고, 증가되는 정도는 온도가 높아질수록 증가율이 높은 것으로 나타났다. 상추의 E coli O157:H7 초기 오염 농도가 병원균의 최대 생장 밀도 에 큰 영향을 미치는 것으로 확인되었다. 따라서 본 연구 결과로부터 상추잎에서 식중독세균인 E. coli O157:H7의 생장이 일어나는 것을 확인하였고, 이는 온도의 영향을 많이 받는 것으로 나타났다. 위의 결과에 따라 농식품 안전성 확보를 위해서는 신선 엽채류는 생산 유통 소비 단계 에서 유해미생물의 오염을 예방하는 것이 중요하고 특히 유통과 소비단계에서 저온도 유지가 철저히 이루어져야 할 것으로 사료된다.

가변 시간 뉴톤-랍손 부동소수점 역수 제곱근 계산기 (A Variable Latency Newton-Raphson's Floating Point Number Reciprocal Square Root Computation)

  • 김성기;조경연
    • 정보처리학회논문지A
    • /
    • 제12A권5호
    • /
    • pp.413-420
    • /
    • 2005
  • 부동소수점 제곱근 계산에 많이 사용하는 뉴톤-랍손 부동소수점 역수 제곱근 알고리즘은 일정한 횟수의 곱셈을 반복하여 역수 제곱근을 계산한다. 본 논문에서는 뉴톤-랍손 역수 제곱근 알고리즘의 반복 과정의 오차를 예측하여 오차가 정해진 값보다 작아지는 시점까지 반복 연산하는 알고리즘을 제안한다. `F`의 역수 제곱근 계산은 초기값 '$X_0={\frac{1}{\sqrt{F}}}{\pm}e_0$'에 대하여, '$X_{i+1}=\frac{{X_i}(3-e_r-{FX_i}^2)}{2}$, $i\in{0,1,2,{\ldots}n-1}$'을 반복한다. 중간 곱셈 결과는 소수점 이하 p 비트 미만을 절삭하며, 절삭 오차는 '$e_r=2^{-p}$' 보다 작다. p는 단정도실수에서 28, 배정도실수에서 58이다. '$X_i={\frac{1}{\sqrt{F}}}{\pm}e_i$'라고 하면 '$X_{i+1}={\frac{1}{\sqrt{F}}}-e_{i+1}$, $e_{i+1}{<}{\frac{3{\sqrt{F}}{{e_i}^2}}{2}}{\mp}{\frac{{Fe_i}^3}{2}}+2e_r$이 된다. '$|{\frac{\sqrt{3-e_r-{FX_i}^2}}{2}}-1|<2^{\frac{\sqrt{-p}{2}}}$'이면,'$e_{i+1}<8e_r$이 부동소수점으로 표현 가능한 최소값보다 작아지며, '$X_{i+1}\fallingdotseq{\frac{1}{\sqrt{F}}}$'이다. 본 논문에서 제안한 알고리즘은 입력 값에 따라서 곱셈 횟수가 다르므로, 평균 곱셈 횟수를 계산하는 방식을 도출하고, 여러 크기의 근사 역수 제곱근 테이블($X_0={\frac{1}{\sqrt{F}}}{\pm}e_0$)에서 단정도실수 및 배정도실수의 역수 제곱근 계산에 필요한 평균 곱셈 횟수를 계산한다 이들 평균 곱셈 횟수를 종래 알고리즘과 비교하여 본 논문에서 제안한 알고리즘의 우수성을 증명한다. 본 논문에서 제안한 알고리즘은 오차가 일정한 값보다 작아질 때까지만 반복하므로 역수 제곱근 계산기의 성능을 높일 수 있다. 또한 최적의 근사 역수 제곱근 테이블을 구성할 수 있다. 본 논문의 연구 결과는 디지털 신호처리, 컴퓨터 그라픽스, 멀티미디어, 과학 기술 연산 등 부동소수점 계산기가 사용되는 분야에서 폭 넓게 사용될 수 있다.

펄닭새우 생식세포형성과정 및 초기발생 (GAMETOGENESIS AND EARLY DEVELOPMENT OF LINUPARUS TRIGONUS(VON SIEBOLD))

  • 김창현
    • 한국수산과학회지
    • /
    • 제10권2호
    • /
    • pp.71-96
    • /
    • 1977
  • 제주도 수림리 해역에서 어획된 펄닭새우, Linuparus trigonus를 재료로 1976년 2월부터 1977년 1월까지 생식세포형성과정 및 생식주기의 변화과정과 산란후 난내배발생과정 등을 조직학적 방법에 의하여 조사하였고, 초기부화 유생의 특징을 형태학적 면으로 고찰하였다. 1. 정소는 세장된 맹관상구조로서 좌우 대칭이며 중앙전부에서 융합되어 H자형을 나타낸다. 외측은 결제성직물모에 의해 싸여 있고, 내부에는 단관상인 정세관이 간곡되어 존재하며 소량이 간질이 분포한다. 난소는 1쌍이 맹관상엽으로 구성되어 정소와 마찬가지로 중앙전부에서 양엽이 융합되어 있다. 난소는 이중결제성조직모에 의하여 구분된 몇 개의 난낭으로 구성되어 있다. 2. 정세관의 생식상피상에서 정원세포의 분열상은 연중 관찰되고 있으며, 부분적으로는 계절과 관계없이 점진적으로 정자형성과정이 진행되고 있다. 따라서 소수이긴 하나 정자 역시 연중 관찰된다. 3. 초기난원세포들은 난낭내에 풍부히 분포하는 조직성간충직으로부터 영양공급을 받으며, 난모세포는 세포질이 풍부한 여포세포에 의하여 성장된다. 산란은 난소내에서 완전히 성숙분열을 마치고 반감된 염색체를 가진 완숙난자가 된 후 산란된다. 4. 생식주기는 9월부터 12월까지의 분열증식기, 1월부터 3월까지의 성장기, 4월부터 5월까지의 성숙분열기 및 6월부터 8월까지의 완숙기로 구분할 수 있으며 산란기는 5월부터 시작하여 8월말까지초 그 성기는 7월말부터 8월초순으로 간주된다. 5. 배발생은 표할로서 배반역의 세포밀집구로부터 원구가 형성되며, 이곳에서 배엽의 분화가 시작된다. 중배엽형성은 배반역에서 분화된 중내배엽모세포로부터 기원된다. 6. 내배엽형성은 중내배엽모세포 이외 난황낭 상방에서 엽열법으로 분화되어 온 것이 있고 이들내배엽이 중장형성에 관여하는 것 같다. 7. 펄닭새우의 제1기 유생은 체장 및 각 부속피의 형태학적 특징면에서 Scyllaridae과의 유생과는 물론이고, 같은 Palinuridae과의 Panulirus 속의 제1기 Phyllosoma 유생과도 많은 형태적 상이점이 있어 본종의 분류학적 재검토가 필요하다고 생각된다.

  • PDF

둥근마(Dioscorea opposita Thunb.) 기내 소괴경 생산을 위한 배양환경과 배지의 교체효과 (Effects of Media Replacement and Environmental Control for in vitro Microtuber Production of Yam (Dioscorea opposita Thunb.))

  • 정은아;정정학;권순태
    • 한국자원식물학회지
    • /
    • 제25권2호
    • /
    • pp.225-231
    • /
    • 2012
  • 둥근마 액체배양에서 소괴경의 생산을 위하여 배양온도와 일장의 전환과 배양 배지의 교체 효과를 조사하였다. 둥근마 액체배양에서 식물체의 증식을 위한 일장시간은 6주의 배양기간 동안 $25^{\circ}C$에서 16시간보다는 24시간이 효과적이었다. 기내소괴경의 생산을 위하여 배양기간을 12주로 연장하여 배양하였으며, 배지교체의 효과를 검토하기 위하여, 배양 중기인 배양 후 6주째에 새로운 배지로 교체하였더니, 배지를 교체하지 않은 것보다 소괴경의 형성수가 평균 5개씩 더 많았고, 소괴경무게도 70% 이상 증가하였다. 배양환경의 전환이 소괴경 형성에 미치는 효과를 알아보기 위하여, 12주의 배양기간 중에 식물체 생장이 활발한 초기 6주간은 $25^{\circ}C$에서 24시간의 일장환경에서 배양하고, 이후 6주간의 배양온도와 일장시간을 전환하였다. 배양온도는 $25^{\circ}C$$15^{\circ}C$보다 효과적이었고, $25^{\circ}C$에서 일장시간은 24시간이 암처리 또는 8시간 일장처리보다 효과가 있었다. 12주간의 배양기간중에 배지 교체의 적절한 시기는 배양 후 2, 4, 6, 8, 10주째 또는 배지 무교체 처리구중에서, 생체중, 마디수, 소괴경수에서는 2주 또는 6주째에 교체하는 것이 좋았고, 소괴경중은 8주째 교체 처리구에서 가장 무거웠으나 소괴경의 수와 무게를 모두 고려하였을 때, 초기 배양 후 6주째에 배지 교체하는 것이 가장 효율적이었다. 12주간의 배양기간 중 배양 후 6주째에 교체할 배지의 성분은 sucrose 30, 60 $g{\cdot}L^{-1}$ 또는 sucrose 60 g + BA 0.1 $mg{\cdot}L^{-1}$ 함유 배지 중에서 sucrose 60 $g{\cdot}L^{-1}$이 함유된 배지로 교체하였을 때, 소괴경의 총무게가 가장 무거워 소괴경의 비대에 가장 효과적이었다. 따라서, 둥근마의 액체배양시 $25{\pm}1^{\circ}C$, 24시간 광조건으로, 마디접종 후 6주째에 sucrose 60 $g{\cdot}L^{-1}$를 함유한 배지로 교체하여 6주간 추가 배양하는 방법이 기내 식물체와 소괴경의 생장과 형성에 가장 효과적이었다.

고감도 형광판을 이용한 실시간 선량측정 가능성 연구 (Feasibility Study of the Real-Time IMRT Dosimetry Using a Scintillation Screen)

  • 임상욱;이병용;고영은;지영훈;김종훈;안승도;이상욱;신성수;권수일;최은경
    • Radiation Oncology Journal
    • /
    • 제22권1호
    • /
    • pp.64-68
    • /
    • 2004
  • 목적 : 고감도형광판을 이용하여 2차원적인 선량분포를 실시간으로 얻을 수 있는 quality assurance (QA) 장치의 개발 가능성을 알아보고자 한다. 대상 및 방법 : 고감도형광판을 삽입한 직경 25 cm의 물 팬톰을 제작하였으며 여기에 charge-coupled device (CCD) 카메라를 부착하여 방사선조사 시 형광판에서 발생되는 가시광선에 의한 영상을 얻었고 영상이 가지고 있는 세기정보를 계산하여 픽셀값에 따른 선량분포를 실시간으로 확인하였다. 회전치료 및 세기조절방사선치료를 각각 수행하여 형광판으로부터 얻은 등선량곡선을 치료계획장치에서 계산된 등선량곡선과 비교하였다 결과 : 선량당 빛의 세기의 관계그래프를 이용하여 형광판과 CCD의 감도 보정을 위한 커널(kernel)을 구하였는데 두 개의 에러함수 곱으로 표현할 수 있었다. 회전치료(Arc Therapy)와 intensity modulated radiation therapy (IMRT)에서 형광판으로 측정한 등선량곡선과 치료계획장치에서 계산된 등선량분포 비교에서 고선량에서 최대 8 mm 이내의 오차를 보였다. 결론 : 본 연구에서 개발한 2차원 선량계를 이용하여 물팬톰에서 선량과 빛의 세기와의 관계 및 방사선 조사시간과 빛의 양의 관계를 찾을 수가 있었고 세기조절방사선치료 QA를 위한 실시간 평면선량계로서의 사용 가능성을 보였다.

Chitosan-ascorbate 처리 과메기에 있어서 오염미생물에 대한 저해효과 (Antibacterial effects of Chitosanon-ascorbate Treated Kwamaegi Prepared on Microorganism Contamination)

  • 김영숙;오승희;김순동
    • KSBB Journal
    • /
    • 제24권2호
    • /
    • pp.156-162
    • /
    • 2009
  • 과메기를 표준화하는 일환으로 감압건조기 (vacuum drying)를 사용하여 CA (chitosan-ascorbate)로 표면을 coating한 것과 시중에서 판매되고 있는 일반 과메기와 미생물오염도를 비교분석 하였다. Total aerobacter에서 SCA (CA 처리한 꽁치 과메기)는 1.41, SGRW (ginseng steamed red, wine으로 처리한 꽁치 과메기)에서 1.63, SNT (CA 비처리한 시중판매 과메기) 에서는 1.9 log cycle 오염된 것을 비교하면 SCA가 0.22-0.49 log cycle 항균효과를 보인다. HCA (CA 처리한 청어과메기)에서는 2.27, HDW (심층수로 처리한 청어과메기) 2.32, HNT (비처리한 청어과메기) 2.72로서 오염도를 비교하면 HCA는 0.05-0.45 log cycle을 억제시켰다. GCA (CA 처리한 전어과메기)에서는 0.95, GDW (심층수로 처리한 전어과메기)와 GNT (비처리한 전어과메기)가 1.4의 수치를 나타내어서, GCA는 비처리한 GNT와 비교할 때 0.45 log cycle을 저해시켰다. Coliform과 E. coli에서는 오염미생물이 검출되지 않았다. S. aureus는 SCA 에서 0.47, SGRW 1.15, SNT 1.27로 조사되어 미생물 오염도를 비교하면 SCA는 0.68-0.8 log cycle의 오염미생물을 억제시킨다. HCA는 1.15, HDW 1.11, HNT 1.36과 비교하면 HCA는 오염미생물 0.21 log cycle을 저해시켰다. GCA는 0.47, GDW와 GNT가 1.08과 1.34로 검출되었다. 즉 GCA에서는 오염된 미생물 0.26-0.61 log cycle 오염미생물을 억제시킨다. 수분함량 측정의 결과는 GDW 29%, HCA 31%, HNT 32%로 조사되어서 적당한 수분함량을 보유하고 있으나, SGW, GCA, HDW, SCA는 7-15%가 부족하며, SNT 와 GNT는 과메기 표준수분함량 (30%) 보다 10%가 더 많아서 미생물의 오염과 과산화물 증가 및 산패를 더 빨리 초래 한다. CA를 첨가하였을 때 과산화물은 SCA 41, HCA 45, GCA 49 meq로 조사되었으며, 항균성을 첨가하지 않은 시중과메기 (SNT, HNT, GNT)와 비교할 때 과산화물이 12 meq 더 낮게 조사되었다. SEM 관찰에서는 SCA, HCA가 조직표면이 선명하고 과산화물이 낮게 검출되었으며, 반면 항균성을 처리하지 않은 SGRW, HDW는 과산화물이 많으며 조직표면이 불투명하였다. 관능평가에서는 SCA, SGW 등의 순으로 꽁치 과메기 선호도가 가장 높았으며, 다음으로 청어, 전어 과메기 순으로 조사되었다.

Microprogation And Environment Conditions Affecting On Growth Of In Vitro And Ex Vitro Of A. Formosanus Hay

  • Ket, Nguyen-Van;Paek, Kee-Yoeup
    • 한국자원식물학회:학술대회논문집
    • /
    • 한국자원식물학회 2002년도 심포지엄
    • /
    • pp.29-30
    • /
    • 2002
  • The goal of this research was to develop the effectiveness of in vitro culture method for A. formosanus and study the environment in vitro conditions affecting on growth. The first series of experiments were examined to investigate the response of three different basal media, MS (Murashige and Skoog, 1962), Knudson (KC; Knudson, 1946) and modified hyponex on growth and multiplication during in vitro culture. Multiple shoot proliferation was induced in shoot tip explants on Hyponex (H3) media supplemented with BA (1 mg1$\^$-1/) or TDZ (1-2 mg1$\^$-1/). Addition of activated charcoal (1%) to the TDZ containing medium promoted rapid shoot tip proliferation (11.1 shoots per explant) but the same medium had an opposite effect resulting in poor proliferation in the nodal explants. However, the regenerated shoots had slow growth rate and failed to elongate. This problem was overcome by transferring the shoot clumps to a hormone free H3 media supplemented with 2% sucrose and 0.5% activated charcoal. Using bioreactor culture for scaling up was also shown the best way for multiple shoot induction and growth of this plant. The second series of experiments was studied to investigate the effect of physical environment factors on growth of in vitro plantlets. The Anoectochilus formosanus plantlets were cultured under different air exchange rate (0.1, 0.9, 1.2h$\^$-1/), without sucrose or supplement 20g.1$\^$-1/ (photoautotrophic or photomixotrophic, respectively), and different photosynthesis photon flux (40, 80, 120 ,${\mu}$mol.m$^2$.s$\^$-1/- PPF). Under non-enrichment CO$_2$ treatment, slow growth was observed in photoautotrophical condition as compared with photomixotrophical condition on shoot height, fresh weigh and dry weight parameters; High air exchange (1.2.h-l) was found to be inadequate for plant growth in photomixotrophical condition. On the contrary, under CO$_2$, enrichment treatment, the plant growth parameters were sharply (visibly) improved on photoautotrophic treatments, especially on the treatment with air exchange rate of 0.9.h-1. The growth of plant in photoautotrophic condition was not inferior compared with photomixotrophic, and the best growth of plantlet was observed in treatment with low air exchange rate (0.9.h-1). Raising the PPF level from 80 to 120${\mu}$mol.m$\^$-2/.s$\^$-1/ decreased the plant height, particularly at 120${\mu}$mol.m$\^$-2/.s$\^$-1/ in photoautotrophic condition, fresh weight and dry weight declined noticeably. At the PPF of 120${\mu}$mol.m$\^$-2/,s$\^$-1/, chlorophyll contents lowed compared to those grown under low PPF but time courses of net photosynthesis rate was decreased noticeably. Light quality mainly affected morphological variables, changes of light quality also positively affected biomass production via changes in leaf area, stem elongation, chlorophyll content. Plant biomass was reduced when A. formosanus were grown under red LEDs in the absence of blue wavelengths compare to plants grown under supplemental blue light or under fluorescent light. Stem elongation was observed under red and blue light in the present experiment. Smaller leaf area has found under blue light than with other lighting treatments. Chlorophyll degradation was more pronounced in red and blue light compared with white light or red plus blue light which consequent affected the photosynthetic capacity of the plant. The third series of experiment were studied to investigate the effect of physical environment factors on growth of ex vitro plants including photosynthesis photon flux (PPF), light quality, growing substrates, electrical conductivity (EC) and humidity conditions. In the present experiments, response of plant on PPF and light quality was similar in vitro plants under photosynthesis photon flux 40${\mu}$mol.m,$\^$-2/.s$\^$-1/ and white light or blue plus red lights were the best growth. Substrates testing results were indicated cocopeat or peat moss were good substrates for A. formosanus growth under the greenhouse conditions. In case of A. formosanus plants, EC is generally maintained in the range 0.7 to 1.5 dS.m-1 was shown best results in growth of this plant. Keeping high humidity over 70% under low radiation enhanced growth rate and mass production.

  • PDF

한국산 개불, Urechis unicinctus (von Drasche)의 생식주기 (Reproductive Cycle of the Echiuroid Worm Urechis unicinctus(von Drasche) in Southern Korea)

  • 최상덕;김호진;이원교;곽은주;윤호섭;라성주;이인곤
    • 한국양식학회지
    • /
    • 제13권2호
    • /
    • pp.169-174
    • /
    • 2000
  • 한국산 개불의 명확한 생식주기를 밝히고 종묘생산을 위한 기초 자료를 얻기 위하여 1998년 9월부터 1999년 8월까지 주로 조직학적 방법에 의해 생식소의 발달양상과 산란시기를 조사하였다. 생식소중량지수(GSI)는 11월에 암, 수 각각 7.01, 6.24로 연중 최고 값을 도였으며, 이후 급격히 감소하여 2월에 암수 각각 0.52, 1.04로 연중 최소 값을 보였다. 그 후 GSI는 급격히 증가하여 3~4월에 높은 값을 나타내었고, 5월부터 다시 감소하기 시작하여 8월까지 특이한 변화가 없었다. 그리고 GSI는 10~ll월에 다시 증가하였다. GSI의 연중 변화를 종합해 볼 때 한국산 개불은 연 2회 산란한 것으로 판단된다. 개불의 난경 변화는 산란기인 12월에 평균난경은 96.16 ${\mu}$m였으며, 이후 급격히 감소하나 3월부터 서서히 증가하기 시작하여 4월에 평균난경 81.52${\mu}$m, 5월에 105.20~29.60${\mu}$m의 높은 변화를 보였다. 암컷의 생식주기는 분열증식기91~2월, 6~9월), 성숙기(3~4월, 11월), 방출기(5월, 12월), 퇴화 및 휴지기(1월, 6월) 로 나눌 수 있고, 수컷의 생식주기는 분열증식기(1~2월, 6~9월), 성숙기(3~4월, 10~11월), 방출기(5월, 12월) 그리고 퇴화 및 휴지기(1월, 6월)로 나눌 수 있다. 개불의 난소에 있어 조직학적인 가장 큰 변화는 GSI가 가장 높은 11월과 3월에 주변인기의 난모세포가 관찰되었고, 생식소내 난모세포들의 성숙은 일괄적으로 일어난다. 정소는 정소내벽에서 분화.성숙되어 정소 내부로 떨어져 나오며 완숙시의 정소 조직은 초기의 정소와 비교하여 얇은 막으로만 이루어졌다.imer를 사용했을 경우 RAPD분석 결과 종간 및 종 내의 지역적 유전적 변이를 확인 할 수 있었다. 그러나 K16/17과 K20/21 primer를 이용한 경우 종 내의 지역별 유전적 변이는 확인할 수 없었다. K13 primer의 경우 유사도 (similarity)는 보라성게 종 내의 지역적 차이가 0.67-0.92, 말똥성게의 경우 종 내의 지역적 변이 폭이 0.60-0.73으로 나타났으며 보라성게와 말똥성게의 종간 유사도는 17-44%로 낮게 나타났다. 제주 연안에 있어 지역에 따른 보라성게와 말똥성게의 크기, GSI등의 변이는 유전적 차이보다는 수온과 먹이 등 과 같은 생태학적 요인에 기인한 것으로 판단되었다.ngto contains relatively high amount of trace elements, P, S, Zr, Sr, Ba, Rb, and Ce including considerable amount of Li, V, Cr, Zn, Co, Ni, Cu, Y, Nb, La, Nd, Pb, Th in excess of 10 ppm. Relatively high amount of most trace elements were detected in the Hwangto. The major and minor chemical compositions of the Hwangto were different depending on the types of host rocks. However, their difference was in the similar range compared with the compositions of host rocks. electron acceptor triggers sensory transduction processes

  • PDF

Improving Corsican pine somatic embryo maturation: comparison of somatic and zygotic embryo morphology and germination

  • Wtpsk, Senarath;Shaw, D.S.;Lee, Kui-Jae;Lee, Wang-Hyu
    • 한국자원식물학회:학술대회논문집
    • /
    • 한국자원식물학회 2003년도 춘계 학술발표대회
    • /
    • pp.61-62
    • /
    • 2003
  • Clonal propagation of high-value forest trees through somatic embryogenesis (SE) has the potential to rapidly capture the benefits of breeding or genetic engineering programs and to improve raw material uniformity and quality. A major barrier to the commercialization of this technology is the low quality of the resulting embryos. Several factors limit commercialization of SE for Corsican pine, including low initiation rates, low culture survival, culture decline causing low or no embryo production, and inability of somatic embryos to fully mature, resulting in low germination and reduced vigour of somatic seedlings. The objective was to develop a Corsican pine maturation medium that would produce cotyledonary embryos capable of germination. Treatments were arranged in a completely randomized design. Data were analyzed by analysis of variance, and significant differences between treatments determined by multiple range test at P=0.05. Corsican pine (Pinus nigra var. maritima) cultures were initiated on modified !P6 medium. Modifications of the same media were used for culture multiplication and maintenance. Embryogenic cultures were maintained on the same medium semi solidified with 2.5 g/l Gelrite. A maturation medium, capable of promoting the development of Corsican pine somatic embryos that can germinate, is a combination of iP6 modified salts, 2% maltose, 13% polyethylene glycol (PEG), 5 mg!l abscisic acid (ABA), and 2.5 g/l Gelrite. After initiation and once enough tissue developed they were grown in liquid medium. Embryogenic cell suspensions were established by adding 0.951.05 g of 10- to 14-day-old semisolid-grown embryogenic tissue to 9 ml of liquid maintenance media in a 250ml Erlenmeyer flask. Cultures were then incubated in the dark at 2022$^{\circ}$C and rotated at 120 rpm. After 2.53 months on maturation medium, somatic embryos were selected that exhibited normal embryo shape. Ten embryos were placed horizontally on 20 ml of either germination medium ($\frac{2}{1}$strength Murashige and Skoog (1962) salts with 2.5 g/l activated charcoal) or same medium with copper sulphate adjusted to 0.25 mg/1 to compensate for copper adsorption by activated carbon. 2% and 4% maltose was substituted by 7.5% and 13% PEG respectively to improve the yield of the embryos. Substitution of' maltose with PEG was clearly beneficial to embryo development. When 2% of the maltose was replaced with 7.5% PEG, many embryos developed to large bullet-shaped embryos. At latter stages of development most embryos callused and stopped development. A few short, barrel-shaped cotyledonary embryos formed that were covered by callus on the sides and base. When 4% of the maltose was removed and substituted with 13% PEG, the embryos developed further, emerging from the callus and increasing yield slightly. Microscopic examination of the cultures showed differing morphologies, varying from mostly single cells or clumps to well-formed somatic embryos that resembled early zygotic embryos only liquid cultures with organized early-stag. A procedure for converting and acclimating germinants to growth in soil and greenhouse conditions is also tested. Seedling conversion and growth were highly related to the quality of the germinant at the time of planting. Germinants with larger shoots, longer, straighter hypocotyls and longer roots performed best. When mature zygotic embryos germinate the root emerges, before or coincident with the shoot. In contrast, somatic embryos germinate in reverse sequence, with the cotyledons greening first, then shoot emergence and then, much later, if at all, the appearance of the root. Somatic seedlings, produced from the maturation medium, showed 100% survival when planted in a field setting. Somatic seedlings showed normal yearly growth relative to standard seedlings from natural seed.

  • PDF

가변 시간 뉴톤-랍손 부동소수점 역수 계산기 (A Variable Latency Newton-Raphson's Floating Point Number Reciprocal Computation)

  • 김성기;조경연
    • 정보처리학회논문지A
    • /
    • 제12A권2호
    • /
    • pp.95-102
    • /
    • 2005
  • 부동소수점 나눗셈에서 많이 사용하는 뉴톤-랍손 부동소수점 역수 알고리즘은 일정한 횟수의 곱셈을 반복하여 역수를 계산한다. 본 논문에서는 오차가 정해진 값보다 작아질 때까지 곱셈을 반복해서 역수를 계산하는 가변 시간 뉴톤-랍손 부동소수점 역수 알고리즘을 제안한다. 'F'의 역수 계산은 초기값 $'X_0=\frac{1}{F}{\pm}e_0'$에 대하여, $'X_{i+1}=X=X_i*(2-e_r-F*X_i),\;i\in\{0,\;1,\;2,...n-1\}'$을 반복한다. 중간 곱셈 견과는 소수점 이하 p비트 미만을 절삭하며, 절삭 오차는 $'e_r=2^{-p}'$보다 작다. p는 단정도실수에서 27, 배정도실수에서 57이다. $'X_i=\frac{1}{F}+e_i{'}$라 하면 $'X_{i+1}=\frac{1}{F}-e_{i+1},\;e_{i+1}이 된다. $'\mid(2-e_r-F*X_i)-1\mid<2^{\frac{-p+2}{2}}{'}이면, $'e_{i+1}<4e_r{'}$이 부동산소수점으로 표현 가능한 최소값보다 작이지며, $'X_{i+1}\fallingdotseq\frac{1}{F}'$이다. 본 논문에서 제안한 알고리즘은 입력 값에 따라서 곱셈 횟수가 다르므로, 평균 곱셈 횟수를 계산하는 방식을 유도하고, 여러 크기의 근사 역수 테이블$(X_0=\frac{1}{F}{\pm}e_0)$에서 단정도실수 및 배정도실수의 역수 계산에 필요한 평균 곱셈 횟수를 계산한다. 이들 평균 곱셈 횟수를 종래 알고리즘과 비교하여 본 논문에서 제안한 알고리즘의 우수성을 증명한다. 본 논문에서 제안한 알고리즘은 오차가 일정한 값보다 작아질 때까지만 반복 연산을 수행하므로 역수 계산기의 성능을 높일 수 있다. 또한 최적의 근사 역수 테이블을 구성할 수 있다. 본 논문의 연구 결과는 디지털 신호처리, 컴퓨터 그라픽스, 멀티미디어, 과학 기술 연산 등 부동소수점 계산기가 사용되는 분야에서 폭 넓게 사용될 수 있다.