• Journal of the Korean Society for Railway
• /
• v.13 no.1
• /
• pp.119-124
• /
• 2010

Light rail is an electric railway system, characterized by its ability to operate single or multiple car consists (trains) along exclusive rights-of-way at ground level, on aerial structures, in subways or in streets, able to board and discharge passengers at station platforms or at street, track, or car-floor level and normally powered by overhead electrical wires. Depending upon the specific system, the light rail lends some major advantages to urban settings. The evaluation of light rail technology as a potential component of regional transit systems has been the subject of extensive studies throughout the country in the past decade. For the study, feasibility was defined as "the ability of an LRT system to achieve certain level of transportation market in comparison with other transportation alternatives." This paper describes the feasibility study to evaluate a proposed light rail development project. The minimum are those LRT systems that would met to make a project feasible for further evaluation.

• Journal of Navigation and Port Research
• /
• v.44 no.2
• /
• pp.119-127
• /
• 2020

In this study, the current state of management efficiency of ocean carriers in Korea and the factors affecting them were analyzed. The purpose of this research is to enhance global competitiveness of ocean carriers by presenting suggestions that can improve management efficiency based on the analysis results. The measurement of management efficiency was made using the DEA model. The results of testing the adequacy of the input and output variables used are as follows. Appropriate inputs are total assets, cost of goods sold, charter expenses, sales and general management expenses, and interest expenses. Appropriate variables are sales, operating income, and operating cash flow. According to the analysis results of the DEA model by these variables, inefficient carriers (78%) are nearly four times more than efficient carriers(22%). However, container carriers have the most improved management efficiency compared to 2016 and 2017. According to the panel regression analysis, the charter rate has the greatest negative impact on efficiency (CRS), and the debt rate has a significant negative impact. Thus, it appears that reducing the charter size and the debt-to-sale rate facilitate improvement of the management efficiency of ocean carriers. Additionally, the pre-sales tax return rate, value added rate, total asset turnover rate, and the scale variable and interest coverage rate have a positive (+) effect. Thus ocean carriers should restore their global competitiveness by improving management efficiency by securing stable cargoes increasing sales profitability from the cost management perspective, increasing productivity, and enhancing the efficiency of their total assets through efficient fleet management.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.12 no.1
• /
• pp.101-108
• /
• 2017

As the quantum gate matrix is a $r^{n+1}{\times}r^{n+1}$ dimension when the radix is r, the number of control state vectors is n, and the number of target state vectors is one, the matrix dimension with increasing n is exponentially increasing. If the number of control state vectors is $2^n$, then the number of $2^n-1$ unit matrix operations preserves the output from the input, and only one can be performed the unitary operation to the target state vector. Therefore, this paper proposes a new method of function embedding that can replace $2^n-1$ times of unit matrix operations with deterministic contribution to matrix dimension by arithmetic power switch of the unitary gate. The proposed function embedding method uses a binary literal switch with a multivalued threshold, so that a general purpose hybrid MCU gate can be realized in a $r{\times}r$ unitary matrix.

• The Journal of Society for e-Business Studies
• /
• v.7 no.1
• /
• pp.87-106
• /
• 2002

The behavioral and dynamic implications of an ERP implementation/installation are, to say the least, not well understood. Getting the switches set to enable the ERP software to go live is becoming straightforward. The really difficult part is understanding all of the dynamic interactions that accrue as a consequence. Dynamic causal and connectionist models are employed to facilitate an understanding of the dynamics and to enable control of the information-enhanced processes to take place. The connectionist model ran be analyzing (behind the scenes) the information accesses and transfers and coming If some conclusions about strong linkages that are getting established and what the behavioral implications of those new linkages and information accesses we. Ultimately, the connectionist model will come to an understanding of the dynamic, behavioral implications of the larger ERP implementation/installation per se. The underlying connectionist model will determine information transfers and workflow. Once a map of these two infrastructures is determined by the model, it becomes a relatively easy job for an analyst to suggest improvements in both. Connectionist models start with analog object structures and then use learning to produce mechanisms for managerial problem diagnoses. These mechanisms are neural models with multiple-layer structures that support continuous input/output. Based on earlier work performed and published by the author[10][11], a Connectionist ReasOning and LEarning System(CROLES) is developed that mimics the real-world reasoning infrastructure. Coupled with an explanation subsystem, this system can provide explanations as to why a particular reasoning structure behaved the way it did. Such a system operates in the backgmund, observing what is happening as every information access, every information response coming from each and every intelligent node (whether natural or artificial) operating within the ERP infrastructure is recorded and encoded. The CROLES is also able to transfer all workflows and map these onto the decision-making nodes of the organization.

• Journal of IKEEE
• /
• v.3 no.2 s.5
• /
• pp.268-275
• /
• 1999

In this paper, a new type of linearization technique proposed, in which the predistortor was added to the feedforward linearizer. As the input power level is applied to HPA, the gain and phase characteristics of the amplifier are also varied. By using of the predistorter the amplitude imbalance and phase imbalance is kept constant. Experimental results are present for Korea PCS frequency band. The center frequency of the feedforward amplifier is 1.843.75 MHz with 1.23 MHz bandwidth. The 2-tone intermodulation distortion at 37dBm output power is about -50dBc, and spurious emission are -46dBc at $fc{\pm}\;885KHz\;and\;-52dBc\;at\;fc\;{\pm}1.98MHz$, respectively.

• Korean Journal of Remote Sensing
• /
• v.36 no.5_2
• /
• pp.949-959
• /
• 2020

In this paper, as a prior study related to the generation of topographic information using the CAS500-1/2 satellite, we propose a method of extraction DSM for each 1:5000 scaled map in North Korea using KOMPSAT-3A strip images. This technique is designed to set the processing area by receiving shape file, only to generate output for every 1:5000 scaled map. In addition, dense point clouds and the DSM were extracted by applying MDR, a robust stereo image matching technique. Considering that the strip images are input in the units of scenes, we attempted to extract a DSM by processing and merging multiple image pairs in one 1:5000 map area. As a result, it was possible to confirm the generation of an integrated DSM with minimal separation at the junction, and as a result of the accuracy analysis, it was confirmed that the accuracy was within 5m compared to GCP.

• Journal of Advanced Navigation Technology
• /
• v.16 no.2
• /
• pp.351-359
• /
• 2012

This paper deals with the design and development of the remote control and measurement systems using CDMA(Code Division Multiple Access) data modem. We propose a bi-directional data communication link without the public IP address in CDMA modem device by the TCP/IP packet and SMS(Short Message Service) communication. The remote control and measurement systems are implemented by a Telit WM-800 modem as DCE(Data Communication Equipment), and Atmel AT89C51 microcontroller as DTE(Data Terminal Equipment). The user application software for the control and measurement system user, and the firmware software of device drivers for peripherals such as a digital input/output device, AD/DAC(Analog to Digital/Digital to Analog Converter), LCD, and temperature/humidity sensor are written in Microsoft C and Keil C language respectively for further various applications. The experimental result of the proposed control and measurement systems implemented in this paper is evaluated via real-time experiments, which works well as designed.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.3 no.4
• /
• pp.365-374
• /
• 1998

The SHE(Selected Harmonic Elimination) PWM scheme which eliminates specific lower order harmonics can generate h high quality output waveforms in 3-level PWM inverters. However. its application has limited since SHE switching a angles cannot be calculated on-line by a microprocessor-implemented control system. Based on off-line optimization. in which multiple SHE solutions were found and analysed for 2 to 5 switching angles per quarter in the 3-level SHE PWM pattern. this paper presents an algebraic algorithm for an ordinary microprocessor to calculate approximate SHE S switching angles on-line with such high resolution that it makes no practical difference between the accurate and the a approximate SHE switching angles. By employing the variable of the dc-link voltage Vdc' the proposed SHE PWM p pattern can ideally compensate the dc input fluctuation together with selected harmonics eliminated.

• Journal of KIISE:Information Networking
• /
• v.31 no.3
• /
• pp.335-346
• /
• 2004

In this paper, we present a high-performance fault-tolerant switching networks using a deflection self-routing scheme, and present fault-diagnosis method for the network. We use the facts: 1) Each stage of the Banyan network is arrayed as the sequences of a Cyclic group of SEs. 2) There is the homomorphism between adjacent stages from a view of self-routing, so that all of each Cyclic group is the subgroup of the Cyclic group in the next stage, and there are factor groups due to such subgroup and homomorphism. We provide high-performance fault-tolerant switching networks of which the all links including augmented links are used as the alternate links detouring faulty links. We also present the fault diagnosis scheme for the proposed switching network that provide multiple paths for each input-output pair.

• The Journal of Asian Finance, Economics and Business
• /
• v.7 no.7
• /
• pp.293-302
• /
• 2020

Capital mobilization is a traditional business of commercial banks and is one of the core foundations for the development of a bank. Capital mobilization is the main input in the operation of a bank, and this is also the basis for generating output for credit activities as well as other banking activities. This study aims to determine the main factors that affect the decisions of individual customers to put savings deposit in Vietnamese commercial banks. Survey data collected from 403 individual customers were analyzed to provide evidence. The results from the multiple regression analysis by using SPSS software revealed that all scales in this study were reliable, and there were six components impacting the savings deposit decision of individual customers from the strongest to the weakest in the following order: the form of promotion, bank brand, service quality, interest rate policy, and employee knowledge and attitude. Besides, the finding showed customers who have high income tend to have a stronger decision on savings deposits in commercial banks. The main findings of this article provide some empirical implications for marketers in banks and serve as a suggestion to improve these factors in order to retain and attract individual customers' savings deposit decisions.