• Korean Institute of Interior Design Journal
• /
• no.33
• /
• pp.90-98
• /
• 2002

The purpose of this study is total analysis which is satisfied factors to users to object of inservice training institute in large enterprise. Common factors are inservice training building, outer space and unit of abode. Those are deduced in the planing stage by important degree. Methods of statistical analysis are enforced by analysis of primary factor, correlation and multiple regression. The result of this shows a difference between important orders to users according to character of influenced factors of the inservice training building and abode.

• Journal of Power Electronics
• /
• v.16 no.3
• /
• pp.1236-1243
• /
• 2016

This paper presents the analysis and design of an active electromagnetic interference (EMI) filter (AEF) for the common-mode (CM) noise reduction of switching power converters. The features of the several types of AEFs are discussed and compared in terms of implementation. The feed-forward AEF with a voltage-sensing and voltage-cancellation (VSVC) structure is implemented for an LLC resonant converter to replace a multiple-stage passive EMI filter and thereby reduce CM noise. The characteristics and performance of the VSVC-type AEF are investigated through theoretical and experimental works.

• International Journal of Concrete Structures and Materials
• /
• v.4 no.2
• /
• pp.77-87
• /
• 2010

Prestressed concrete (PSC) I-type girders have been used for span length around up to 40 m in domestic region. PSC girders are very cost effective girder type and extending their lengths more than 50 m will bring large benefit in cost. A new design method was proposed by combining two notable design concept in order to extend the applicable span length in this study. First of all, several numbers of openings was introduced in the girder web, and half of the anchorage devices were moved into the openings. In this way, large compressive stress developed at end zone was reduced, and the portion of design load coming from self-weight was reduced as well. Secondly, prestressing force was introduced in the girder not once at the initial stage, but through multiple loading stages. A full scale girder with the length of 50 m with the girder depth of 2 m was fabricated, and a flexural test was conducted in order to verify the performance of newly developed girder. Test results showed that the new holed web design concept can provide a way to design girders longer than 50 meters with the girder height of 2 m.

• Proceedings of the KIEE Conference
• /
• 1988.11a
• /
• pp.210-213
• /
• 1988

A new and accurate expression to derive a window area is presented with a sequence for daylighting design using Daylight Factor Method process not in its classical point--by-point method but in lumen method as in artificial lighting design process to consider daylight in the early stage of a building design process. Accepting CIE Overcast Sky as the worst state with the lowest sky luminance, a user of a room can have more available daylight in his or her room. In the design process uniformity is checked to ensure reasonably even daylighting by comparing the depth of the room with the computed limiting depth. After these steps the shape and position of window is altered, of which the Sky Component of Daylight Factor under an Overcast Sky, SCo, is investigated and computed in Composite Simpson Multiple Integral so that a building designer or an analyst can choose the best shape and location that satisfies his/her taste and purpose of the room.

• Journal of the Korean Society of Costume
• /
• v.35
• /
• pp.305-324
• /
• 1997

The purpose of this study was to examine aesthetic effects of face type and necklines of one piece dress one of details in clothes on visual evaluation. For this study two set of stages were processed. At first stage data were collected from female college students in Kwang Ju.Chonnam. Subjects between the aged of 18-26 were took pictured of their faces then they were classified into 7 groups That is egg ob-long round square inverted triangle triangle and diamond shapes. At second stage two sets of experimental design were utilized based on the classified face types. A set of design was 5$\times$4 design which involved 5 levels (egg oblong round inverted triangle and diamong shape) of face type and 4 levels(round boat vee and square neckline) of basic neckline. Another set of de-sign also was 5$\times$4 design which involved 5 levels of face type and 4 levels of modified neckline. As experimental treatment the stimulus materials and questionnaires were employed. The qustionnaires were consisted of visual evaluations on the stimulus materials by using semantic differential scale,. The experiments were proceeded through 2 week by 30 subjects composed of gaduate students and staffs in some departments of Clothing and Textiles at college. Data were analyzed by Frequencies Mean Factor Analysis TTest ANOVA and Ducan's Multiple Range Test. The major results were as followed: 1. There were significant aesthetic effects of face type on visual evaluations, Especially egg and inverted triangle shape among the face types were evaluated more aesthetic than the other face shapes. 2. There were signifiant aesthetic effects of the neckline types on visual evaluations, Es-pecially vee neckline among necklines were more aesthetic than the other necklines,. 3. As compared with the basic neckline types and the modified neckline types the modified necklines were assessed more aes-thetically than the basic necklines. 4, The face type and he neckline type were influenced interactively on visual evauations Specifically it showed that oblong round and diamond shape of face type were matched to vee neckline more than the other necklines, Also it showed that the egg and inverted tri-angle shape wee matched to round vee and squre neckline more than boat neckline.

• Proceedings of the KIEE Conference
• /
• 2004.11c
• /
• pp.196-199
• /
• 2004

This paper presents a structure of the searcher using the space diversity in array antenna system operating in the DS/CDMA signal environments. The new technique exploits the fact that the In-phase and Quadrature components of interferers can respectively be viewed as independent Gaussian noise at each antenna element in most practical CDMA (Code Division Multiple Access) signal environments. The proposed PN acquisition scheme is a single dwell serial PN acquisition system consisting of two stage, that is, the searching stage and the verification stage. The searching stage correlates the received signals with the local PN oscilator for obtaining the synchronous energy at the entire uncertainty region. The verification stage compares the searching energy with the optimal threshold, which is pre-designed in the Lock-Detector, and decides whether the acquisition is successful or fail. In this paper, we analyzed the relationship of both diversity order and the mean acquisition time. In general, It is known that the mean acquisition time decreases significantly as the number of antenna elements increases. But, the enhancement of the performance is saturated in terms of PN acquisition scheme. Therefore, to decrease the mean acquisition time, we must design the optimal array antenna system by considering the operating SNR range of the receiver, the detection probability, and the false alarm probability. The performance of the proposed acquisition scheme is analyzed in frequency-selective Rayleigh fading channels. In this paper, the effect of the number of antenna elements on acquisition scheme is considered in terms of the detection probability, false alarm probability. and the mean acquisition time.

• Journal of KIISE:Computer Systems and Theory
• /
• v.30 no.3_4
• /
• pp.130-137
• /
• 2003

This paper presents the problem of partitioning the Single-Stage Shuffle-Exchange Network(SSEN). An algorithm, named SSEN_to_PSEN, is devised to transform an SSEN into a Partitionable Shuffle-Exchange Network (PSEN). The proposed algorithm presents that the SSEN can be partitioned into independent sub-networks without additional links for N $\leq$ 8. Additional links are needed in order to partition an SSEN, but only when N $\geq$ 16. The running time of the algorithm SSEN_to_PSEN is $\theta$(NlogN). By comparing with a hypercube network, the PSEN is less expensive than a hypercube network even when some additional links are added. By partitioning, a large PSEN in a massively parallel machine can compute various problems for multiple users simultaneously, thereby the processing efficiency of the machine is improved.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2000.04a
• /
• pp.46-50
• /
• 2000

The progressive die are multiple operations performed by means of a die having above two stages, on the each of stages performs a different operation as the sheet metal passes through the die hole. In the field of design and making tool for press working, the progressive die for sheet metal (STS 304, thickness : 0.5mm) is a specific division. In order to prevent the defects, the optimum design of the production part, strip layout, die design, die making and tryout etc. are necessary. They require analysis of many kinds of important factors, I. e. theory and practice of metal press working and its phenomena, die structure, machining condition for die making, die materials, heat treatment of die components, know-how and so on. In this study, we designed and constructed a progressive die of multi-stage and performed try out. Out of these processes the die development could be taken for advance. Especially the result of tryout and its analysis become the characteristics of this paper (part 1 and part 2) that nothing might be ever seen before such as this type of research method on all the processes. In the part 1 of this study we treated die design mostly.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2000.10a
• /
• pp.228-230
• /
• 2000

The multiforming progressive die are multiple operations performed by means of a die having above two stages, jon the each of stages performs a different operation as the sheet metal passes through the die hole. In the field of design and making tool for press working, the progressive die for sheet metal (SPC, thickness :2mm) is a specific division. In order to prevent the defects, the optimum design of the production part, strip layout, die design, die making and tryout etc. are necessary. They require analysis of many kinds of important factors, i.e. theory an practice of metal press working and its phenomena, die structure, machining condition for die making, die materials, heat treatment of die components, know-how and so on. In this study, we designed and constructed a multiforming progressive die as a U-bending working of multi-stage and performed try out. out of these processes the die development could be taken for advance. Especially the result of tryout and its analysis become the characteristics of this paper (part 1 and part 2) that nothing might be ever seen before such as this type of research method on all the processes. In the par 1 of this study we treated die design mostly.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2000.04a
• /
• pp.213-217
• /
• 2000

The progressive die are multiple operations performed by means of a die having above two stages, on the each of stages performs a different operation as the sheet metal passes through the die hole. In the field of design and making tool for press working, the progressive die for sheet metal (STS 304, thickness : 0.5mm) is a specific division. in order to prevent the defects, the optimum design of the production part, strip layout, die design, die making and tryout etc. are necessary. They require analysis of many kinds of important factors, i.e. theory and practice of metal press working and its phenomena, die structure, machining condition for die making, die materials, heat treatment of die components, know-how and so on. In this study, we designed and constructed a progressive die of multi-stage and performed try out. Out of these processes the die development could be taken for advance. Especially the result of tryout and its analysis become the characteristics of this paper (part 1 and part 2) that nothing might be ever seen before such as this type of research method on all the processes. In the part 1 of this study we treated die design mostly.