• 한국분무공학회지
• /
• 제9권4호
• /
• pp.67-76
• /
• 2004

Diode laser absorption sensors are advantageous because they may provide fast, sensitive, absolute, and selective measurements of species concentration. These systems are very attractive for practical applications owing to its compactness, reasonable cost, robustness, and ease of use. In addition, diode lasers we fiber-optic compatible and thus enable simultaneous measurements of multiple species along a line-of-sight. Recent advances of room-temperature, near-IR and visible diode laser sources for telecommunication, optical data storage applications make it possible to be applied for combustion diagnostics based on diode laser absorption spectroscopy. Therefore, combined with fiber-optics and high sensitive detection strategies, compact and portable sensor systems are now appearing for variety of applications. The objectives of this research are to develop new gas sensing system and to verify feasibility of this system. Wavelength modulation spectroscopy has been demonstrated in these experiments and has a bright prospect to this diode laser system.

• Journal of the Optical Society of Korea
• /
• 제16권3호
• /
• pp.210-214
• /
• 2012

We propose and experimentally demonstrate a method for extension of measurement range in a Brillouin optical correlation domain analysis sensor system without resolution deterioration. In the experiment, a 300 m measurement range with about 8 cm spatial resolution was successfully obtained by cascading three different kinds of fibers as a sensing element.

• 한국시뮬레이션학회:학술대회논문집
• /
• 한국시뮬레이션학회 2005년도 춘계학술대회 논문집
• /
• pp.10-14
• /
• 2005

IEEE 802.15.4 low-rate Wireless Personal Area Networks(WPAN) are expected to provide ubiquitous networking between small personal/home devices and sensors with low power consumption and low cost features. The technology employs special CSMA/CA (Carrier Sense Multiple Access/collision Avoidance) to save power consumption for small or portable WPAN-enabled devices. In this paper, we simulation the slotted CSMA/CA of IEEE 802.15.4 MAC and evaluate its performance limit in order to grasp the characteristics of Medium Access Control (MAC) of IEEE 802.15.4 WPAN.

• 한국초전도ㆍ저온공학회논문지
• /
• 제14권4호
• /
• pp.46-49
• /
• 2012

The selection of the temperature sensor in the cryogenic system depends on the temperature range, shape and accuracy. The accuracy of the temperature sensor is essential to improve the reliability of experiment. We have developed the variable temperature cryostat using a two-stage cryocooler. In order to reduce heat load, thermal shield is installed at the first stage with MLI (Multiple layer insulation). We have also developed the sensor holder calibrating more than twenty sensors at the same time for saving time and money. The system can calibrate sensor at variable temperature by controlling electric heater. In this paper, we present design and fabrication of variable temperature cryostat and representative result of Cernox sensor calibration.

• 센서학회지
• /
• 제14권5호
• /
• pp.357-361
• /
• 2005

Low-stress silicon nitride (LSN) thin films with embedded metal line have been developed as free standing structures to keep microspheres in proper locations and localized heat source for application to a chip-based sensor array for the simultaneous and near-real-time detection of multiple analytes in solution. The LSN film has been utilized as a structural material as well as a hard mask layer for wet anisotropic etching of silicon. The LSN was deposited by LPCVD (Low Pressure Chemical Vapor Deposition) process by varing the ratio of source gas flows. The residual stress of the LSN film was measured by laser curvature method. The residual stress of the LSN film is 6 times lower than that of the stoichiometric silicon nitride film. The test results showed that not only the LSN film but also the stack of LSN layers with embedded metal line could stand without notable deflection.

• 센서학회지
• /
• 제24권5호
• /
• pp.342-347
• /
• 2015

We introduce an indoor broadcasting system using light-emitting diode (LED) lamps coupled with a 220 V power line. Two couplers connected to the power line constitute a power line communication (PLC) link. The transmission path from an LED lamp to a photodetector forms a visible light communication (VLC) link in free space. When the LED lamp is coupled to the power line, a composite PLC-VLC link is formed, making it possible to transmit a VLC signal beyond line-of-sight. In experiments, a 4 kHz analog signal modulated with a 100 kHz carrier was sent to the power line by a PLC coupler, and LED lamps coupled to the power line detected the signal and radiated it to multiple VLC receivers in the room. This configuration is useful in expanding an indoor VLC sensor network to adjacent rooms or constructing a voice broadcasting system in a building or apartments with existing power lines.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2017년도 추계학술대회
• /
• pp.94-95
• /
• 2017

지정된 경로에서 6축 센서의 가속도와 각속도를 이용하여 물체의 이동거리를 계산하는 경우 가속도 센서에서 나오는 데이터는 중력을 사용하여 값을 보내주는데, 평평한 상태에서는 중력가속도만 나오므로 영향이 없지만 물체가 움직이면서 기울어지거나 흔들리는 경우 중력가속도와 운동가속도가 더해지고 이에 따라 이동거리 계산에 오차가 발생한다. 이 논문에서는 가속도와 각속도만으로 보정이 힘들다고 판단하여 적외선 센서를 사용하여 이동거리를 산출하는 방법을 제안하고 시스템을 개발한다. 제안한 시스템은 지정된 경로를 따라 이동할 때 적외선 센서를 이용하여 궤도의 구분선을 인식하여 기존 6축 센서로 계산된 이동거리를 보정한다.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2012년도 추계학술발표대회
• /
• pp.373-376
• /
• 2012

본 논문은 진공을 이용한 흡착방식과 바퀴형 이동방식을 이용하고 환경 탐지용 센서를 부착한 벽면 이동형 로봇의 구현에 관한 연구로서, 대형 구조물의 안전 검사 및 위험한 시설물의 보수 작업등을 보조하기 위한 목적이 있다. 로봇의 무게에 따른 중력을 견딜 수 있도록 강력한 진공흡착방식을 고안하여 다양한 벽면재질에도 견딜 수 있도록 설계하였으며, 바퀴형 이동방식을 택하여 높은 이동성과 제어 능력을 고려하였다. 또한 환경 감지를 위한 센서와 카메라를 부착하여 시각정보 등 유용한 정보를 관리자와 통신을 통해 교환할 수 있도록 하여 지능능력과 활용성을 갖추었다.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2012년도 춘계학술발표대회
• /
• pp.417-420
• /
• 2012

본 논문은 진공을 이용한 흡착방식과 바퀴형 이동방식을 이용하고 환경 탐지용 센서를 부착한 벽면 이동형 로봇의 구현에 관한 연구로서, 대형 구조물의 안전 검사 및 위험한 시설물의 보수 작업등을 보조하기 위한 목적이 있다. 로봇의 무게에 따른 중력을 견딜 수 있도록 강력한 진공흡착방식을 고안하여 다양한 벽면재질에도 견딜 수 있도록 설계하였으며, 바퀴형 이동방식을 택하여 높은 이동성과 제어 능력을 고려하였다. 또한 환경 감지를 위한 센서와 카메라를 부착하여 시각정보 등 유용한 정보를 관리자와 통신을 통해 교환할 수 있도록 하여 지능능력과 활용성을 갖추었다.

• 대한임베디드공학회논문지
• /
• 제14권1호
• /
• pp.43-49
• /
• 2019

Recently, the importance of industrial fieldbus has been highlighted since the emergence of Industry 4.0. In particular, the Ethernet-based fieldbus protocol is actively used in automation systems. This paper proposes a safety fence system based on EtherCAT, a type of Ethernet-based fieldbus, to measure external loads. In order to measure the external loads, a force sensor was connected to an EtherCAT slave that transmits the sensor data to an EtherCAT master in real-time. The master ultimately controls the angle of the safety fence when it detects danger based on the given data. In the future, more effiecient safety fence system will be developed by using a HMI system to communicate with the EtherCAT master to manage safety and by employing multiple sensors to increase the accuracy of the fence system.