• Restorative Dentistry and Endodontics
• /
• v.24 no.4
• /
• pp.560-569
• /
• 1999

Blood supply rather than nerve supply implies pulp vitality. To evaluate pulp vitality clinically, electric pulp test and thermal test which are based on sensory nerve response have been used in addition to many auxiliary data such as past dental history, visual inspection, radiographic examination, percussion, palpation and transillumination test. However, reactivity of the nerves to the stimulation is not synonymous with normalcy. Therefore measurement of pulpal blood flow using a laser Doppler flowmeter became a new trial to test the pulp vitality. The purpose of the present study was to evaluate normal pulpal blood flow level of maxillary teeth in adult to provide a guideline in determining the vitality of dental pulp. Pulpal blood flow was measured in maxillary central and lateral incisors, canines, first and second premolars and first molars of seventy nine adults of 22 - 30 years old using a laser Doppler flowmeter (PeriFlux 4001, Perimed Co., Stockholm, Sweden, 780 nm infrared laser, 1mW). For directly-made splints, silicone rubber impressions were taken directly from the mouth. For indirectly-made splints, alginate impressions were taken from the mouth and stone cast were made. After making depressions on the buccal surfaces of the cast teeth to indicate the hole positions, second impressions with vinyl polysyloxane putty were taken from the cast. Holes for the laser probes were made at the putty impressions 4mm above the gingival level. Laser probe (PF416 dental probe, 1.5mm) was inserted in the prepared hole and the splint was set in the mouth. After 10 minutes of patient relaxing, pulpal blood flow was recorded for 5 minutes on each tooth. The recorded flow was saved in the computer and calculated with a software 'Perisoft' version 5.1. Pulpal blood flow was also recorded in six teeth of five individuals with no response to electric pulp test and cold test, with periapical radiolucency, or with history of root canal treatment to compare with nonvital teeth. The difference between the mean flow values of each group of teeth were analyzed using one-way ANOVA and Duncan's Multiple Range test. The results were as follows: 1. The average pulpal blood flow values of all the tested teeth of each location were between 9 - 16 Perfusion Unit. Pulpal blood flow value was highest in maxillary lateral incisors, followed by first premolars, second premolars, canines, central incisors, and then first molars (p<0.01). 2. In six anterior teeth, indirectly-made splint group showed higher pulpal blood flow values than directly-made splint group (p<0.01). In posterior teeth, however, there was no significant flow value difference between directly-made splint group and indirectly-made splint one (p>0.05). 3. Teeth with vital pulps showed higher signal values than teeth with nonvital pulps (p<0.01), and the flow photographs showed heartbeat-synchronous fluctuations and vasomotions, while those were absent in non vital tooth.

• The Journal of Advanced Prosthodontics
• /
• v.1 no.3
• /
• pp.140-144
• /
• 2009

STATEMENT OF PROBLEM. Little information is available about the buccal gingival level of multiple implant restorations. PURPOSE. This study was aimed to evaluate the relationship between width and height of buccal soft tissue around single and 2 adjacent implant restorations. MATERIAL AND METHODS. Four implant restoration groups (first and second molars, single second molars, posterior single restorations between teeth, and anterior single restorations between teeth) were randomly chosen from one dental institute. Each group comprised of 6 patients. After 6 months of function, silicone impressions were taken and stone models were fabricated for each restoration group. The stone models were cut in bucco-lingual direction at the most apical point of buccal gingival margin. The height and width of buccal supra-implant soft tissue were measured. One way ANOVA and Tukey HSD post hoc tests were performed to analyze the data obtained (P < .05). RESULTS. The most unfavorable width-height ratio was noted for the group, which was comprised of the second molar in the multiple adjacent (first and second molar) implant-supported restorations. The group also resulted in the shorter height of buccal supra-implant mucosa rather than that of anterior single implant restorations between natural teeth. CONCLUSION. To achieve a favorable level of buccal gingival margin, greater thickness of buccal supra-implant mucosa is required for the implant restorations without a neighboring natural tooth compared to the implant restorations next to a natural tooth.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2003.11a
• /
• pp.523-526
• /
• 2003

생체정보를 이용한 보안 솔루션이 활발하게 연구되고 있는 가운데, 지문은 가장 널리 사용되고 또한 중점적으로 연구되고 있는 생체특징의 하나로 자리잡았다. 지문인식 시스템에 사용되는 지문 입력기는 광학식, 반도체식 등 다양하나 입력방식은 주로 압착날인식으로 회전식과 달리 손가락 끝을 입력창에 대어 그 순간 접촉된 면의 지문만을 입력받게 된다. 그러므로 입력된 지문영상은 전체지문과 비교했을 때 극히 일부분에 불과하여, 이러한 제한된 영역으로부터 획득된 지문영상들을 비교한다면 비록 동일 지문이라 할지라도 획득 위치의 상이함으로 인해 타인 지문으로 오인식할 소지가 있다. 또한 특징점에 기반한 지문인증 알고리즘의 경우에는 두 지문으로부터 추출된 특징점의 위치 및 상태 정보의 신뢰성에 전적으로 의존하게되므로 특징점의 오추출 및 누락이 전체 시스템 성능을 좌우하게된다. 그러므로 가능한한 넓은 영역의 지문을 사용하고 신뢰할 만한 특징 추출 결과를 얻는 것이 에러율을 개선하는데 필수적이라 하겠다. 이에, 본 논문에서는 사용자 등록시 한 지문에서 획득한 복수의 지문영상을 이용하여 정렬 및 정합 과정을 거친 후 지문영상의 영역을 확장하고 해당 지문영상에서 추출된 특징점을 비교하여 유효하지 않은 특징점을 제거하는 과정을 통하여 등록시 저장되는 특징점 템플릿의 신뢰도를 높여주는 방법을 제안하였다. 제안된 알고리즘은 결과의 객관성을 확보하기 위하여 FVC 2002에서 제공하는 데이터베이스로 테스트한 결과 2.12%의 EER(Equal Error Rate)을 얻을 수 있었다.

• Imaging Science in Dentistry
• /
• v.49 no.1
• /
• pp.35-43
• /
• 2019

Purpose: The goal of this study was to assess the accuracy and reliability of a low-cost portable scanner (Scanify) for imaging facial casts compared to a previously validated portable digital stereophotogrammetry device (Vectra H1). This in vitro study was performed using 2 facial casts obtained by recording impressions of the authors, at King's College London Academic Centre of Reconstructive Science. Materials and Methods: The casts were marked with anthropometric landmarks, then digitised using Scanify and Vectra H1. Computed tomography (CT) scans of the same casts were performed to verify the validation of Vectra H1. The 3-dimensional (3D) images acquired with each device were compared using linear measurements and 3D surface analysis software. Results: Overall, 91% of the linear Scanify measurements were within 1 mm of the corresponding reference values. The mean overall surface difference between the Scanify and Vectra images was <0.3mm. Significant differences were detected in depth measurements. Merging multiple Scanify images produced significantly greater registration error. Conclusion: Scanify is a very low-cost device that could have clinical applications for facial imaging if imaging errors could be corrected by a future software update or hardware revision.

• International Journal of Internet, Broadcasting and Communication
• /
• v.13 no.2
• /
• pp.127-135
• /
• 2021

The goal of this study was to explore the use of multiple SNS platforms and determine whether the number of used platforms affects one's online self-presentations across the said platforms and if there is any difference in one's online and offline self-presentations based on how many SNS platforms are used. This work studied online self-presentations, compared the on/offline ones and tried to find out if the inconsistencies of one's own (observer's) self-presentations both online (across platforms) and on/offline affected the observer's impression formation (likability, trustworthiness and hypocrisy) of others. The study also aimed to find out if the impression of the others' inconsistency both online and offline would differ based on the level of intimacy between the observer and the discussant. Three levels of intimacy were studied in order to do this: friends, acquaintances and strangers (online-only friends). The results showed that the more platforms people used the more inconsistent their online self-presentations got. Even though the results of the study showed barely significant relationship between the number of SNS accounts and one's online and offline self-presentation, and partial connection between observer's inconsistent self-presentations and impression formation of others, interestingly enough, the results managed to find significant differences between the impressions based on the level of intimacy between the observer and the discussants.

• The Journal of Korean Academy of Prosthodontics
• /
• v.60 no.4
• /
• pp.313-319
• /
• 2022

Complete dentures are one of the most basic treatment methods for the treatment of edentulous patients. The manufacturing process of traditional complete dentures goes through the steps of taking primary impressions, secondary impressions, jaw relation record, trying in wax denture, and final denture insertion. Multiple visits and complex manufacturing procedures are required, and errors may occur in each step. With the development of digital technology, manufacturing steps have been reduced by introducing digital technology to the denture treatment process. In the process of manufacturing dentures by introducing a digital process, a more precise work is possible using Computer-Aided Design, and it is possible to shorten the period of labor and reduce the number of visits. In this case, the anterior teeth arrangement of the patient's existing dentures was transferred to the final dentures using a digital method. After taking impression, try-in dentures were digitally fabricated and tried in the oral cavity to evaluate their retention in the oral cavity. Final dentures were manufactured by milling process. The number of visits was reduced, satisfactory retention and stability of dentures were obtained, and aesthetic recovery was achieved.

• The Journal of Korean Academy of Prosthodontics
• /
• v.48 no.4
• /
• pp.280-286
• /
• 2010

Purpose: This study evaluated the detorque values of screws in a multiple implant-supported superstructure using stone casts made with 2 different impression techniques. Material and methods: A fully edentulous mandibular master model and a metal framework directly connected to four implants (Br${\aa}$nemark $System^{(R)}$; Nobel Biocare AB) with a passive fit to each other were fabricated. Six experimental stone casts (Group 1) were made with 6 non-splinted impressions on a master cast and another 6 experimental casts (Group 2) were made with 6 acrylic resin splinted impressions. The detorque values of screws ($TorqTite^{(R)}$ GoldAdapt Abutment Screw; Nobel Biocare AB) were measured twice after the metal framework was fastened onto each experimental stone cast with 20 Ncm torque. Detorque values were analyzed using the mixed model with the fixed effect of screw and reading and the random effect of model for the repeated measured data at a .05 level of ignificance. Results: The mean detorque values were 7.9 Ncm (Group 1) and 8.1 Ncm (Group 2), and the mean of minimum detorque values were 6.1 Ncm (Group 1) and 6.5 Ncm (Group 2). No statistically significant differences between 2 groups were found and no statistically significant differences among 4 screws were found for detorque values. No statistically significant differences between 2 groups were also found for minimum detorque values. Conclusion: In a multiple external hexagon implant-supported prosthesis, no significant differences between 2 groups were found for detorque values and for minimum detorque values. There seems to be no significant differences in screw joint stability between 2 stone cast groups made with 2 different impression techniques.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.26 no.3
• /
• pp.273-283
• /
• 2010

This study evaluated the effect of 3 different compatible screws on the detorque values in a multiple implant-supported superstructure and single implant abutments. An implant superstructure directly connected to 4 implants was screwed to 6 experimental dental stone casts made by acrylic resin splinted impressions, using 20 Ncm. The detorque values of screws were measured twice. Three compatible abutment screws used in this study were TorqTite screw, Gold-Tite screw, and, Titanium screw. And, using single implant abutments (GoldAdapt Engaging abutments), the detorque values of 3 different screws were measured twice on 2 implants of 5 experimental casts. According to statistical analysis of detorque values using mixed model at a .05 level of significance, no statistically significant differences among 3 different compatible screws were found in a multiple implant-supported superstructure (p>0.05). But, in single implant abutments, statistically significant differences among 3 different compatible screws were found (p=0.0175). The detorque values of TorqTite(p=0.0462) and Titanium(p=0.0348) screws were significantly higher than those of Gold-Tite screw, but no statisticantly significantlydifferences were found between TorqTite and Titanium screws(p>0.05). Therefore, various compatible screws showed significant effects on the detorque values for single implant abutment, but, showed no significant effects for a multiple implant-supported superstructure.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.19 no.5
• /
• pp.747-764
• /
• 1995

The purpose of the present study were 1) to identify the dimensional structure of impression formed of a female figure, 2) to analyze effects of several elements of apparel design on impression formation of the figure in suit. The experimental materials developed for this study were a set of stimuli and a response scale. The stimuli consisted of 60 drawings made by identical manipulations of 3 indepndent variables in 3 clothing styles(suit, dress and pants with blouse). The independent variables were (1) five clothing colors (red, blue, yellow, white and black), (2) two lengths(short/long) of suit skirt, dress, and pants (3) two types of blouse and dress collars (shirt collar/ribbon collar). The 7-point semantic differential response scale to measure the dependent variables (formed impressions of the female figure) was composed of 37 bipolar adjectives. Further- more, two open-ended questions were used for interpretation of the reponses. The study proceeded in three independent experimental part was based on the 3 clothing styles using a 5(color)$\times$2(length)$\times$2(collar) factorial design. Subject were 200 female undergraduate students reandomly assigned to one of 20 combinations in each part of the experiment. The data were analyzed by factor analysis, 3-way ANOVA and Multiple Classification Analysis. Five factors emerged to account for the dimensional structure of impression of the female figure in specific attire. These factors included three basic dimensions of impression identified as potency, activity and evaluation, confirming the results of previous studies. Result from open-ended questionaire supported the theoretical perspective of Schneider, Hastorf and Ellsworth on the procedure of impression formation.

• The Journal of Advanced Prosthodontics
• /
• v.9 no.4
• /
• pp.287-293
• /
• 2017

PURPOSE. To compare the dimensional accuracy of three impression techniques- a separating foil impression, a custom tray impression, and a stock tray impression. MATERIALS AND METHODS. A machined mandibular complete-arch metal model with special modifications served as a master cast. Three different impression techniques (n = 6 in each group) were performed with addition-cured silicon materials: i) putty-wash technique with a prefabricated metal tray (MET) using putty and regular body, ii) single-phase impression with custom tray (CUS) using regular body material, and iii) two-stage technique with stock metal tray (SEP) using putty with a separating foil and regular body material. All impressions were poured with epoxy resin. Six different distances (four intra-abutment and two inter-abutment distances) were gauged on the metal master model and on the casts with a microscope in combination with calibrated measuring software. The differences of the evaluated distances between the reference and the three test groups were calculated and expressed as mean (${\pm}SD$). Additionally, the 95% confidence intervals were calculated and significant differences between the experimental groups were assumed when confidence intervals did not overlap. RESULTS. Dimensional changes compared to reference values varied between -74.01 and $32.57{\mu}m$ (MET), -78.86 and 30.84 (CUS), and between -92.20 and 30.98 (SEP). For the intra-abutment distances, no significant differences among the experimental groups were detected. CUS showed a significantly higher dimensional accuracy for the inter-abutment distances with -0.02 and -0.08 percentage deviation compared to MET and SEP. CONCLUSION. The separation foil technique is a simple alternative to the custom tray technique for single tooth restorations, while limitations may exist for extended restorations with multiple abutment teeth.