• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.4
• /
• pp.667-672
• /
• 2003

Smart antennas will be used mon widely for the higher data rate and the larger number of users as the demand of wireless multimedia service is increased. Therefore, the BER performance is analyzed in this paper for DS-CDMA and MC-CDMA systems using smart antennas. A reverse link channel is simulated assuming the frequency selective Rayleigh fading. The simulation results are presented based on the characteristics of DS-CDMA and MC-CDMA systems according to the signal spectrum bandwidth and the method of adaptive beamforming. The BER performances of both systems are improved as the beam width of smart antennas is decreased. Also, it is shown that the performance of MC-CDMA system is much better than that of DS-CDMA system as the number of users is increased.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.2
• /
• pp.491-496
• /
• 2010

This paper describes an analysis of the effectiveness for an anti-ARM technique to protect a radar system. We investigate the optimum deployment of decoy antennas which are widely using for anti-ARM and the electromagnetic field at the ARM receiver. To verify the effect of decoy antennas, we analyze the field intensity and phase at the receiver and develop a numerical simulation program using Matlab. We conduct an analysis of ARM attack in case of using multiple decoy antennas and these results can be used to decide the optimum positions of the decoys for anti-ARM.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.21 no.1
• /
• pp.73-80
• /
• 2022

Sensors are applied to small aviation platforms for various purposes. Radio frequency (RF) antennas, which are representative sensors, are available in many forms but require the application of slot array RF antennas to ensure high performance and designation. Slot RF array antennas are applied to dip brazing techniques, but the yield and production time are determined by the proficiency of production personnel in a labor-intensive form. Unmanned aerial vehicles or drones, which are representative small aviation platforms, are continuously exposed to various random vibrations because propellers and multiple power sources are used in them. In this study, the fatigue life of slot array RF antennas applied with additive manufacturing was evaluated through the cumulative damage method (Miner's rule) in a vibration environment with a small aviation platform. For the evaluation, an S N curve obtained from a fatigue strength test was used.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.24 no.12
• /
• pp.1113-1119
• /
• 2013

In this letter, a new approach is proposed for the design of a multi antenna for MIMO wireless devices. The proposed antenna covers various LTE(Long Term Evolution) service bands: band 17(704~746 MHz), band 13(746~787 MHz), band 5(824~894 MHz), and band 8(880~960 MHz). The proposed main antenna consists of a conventional monopole antenna with an inverted L-shaped slit for wideband operation. The proposed the LTE sub antenna is based on a switch loaded loop antenna structure, with a resonance frequency that can be controlled by capacitance of a logic circuit. The tuning technique for the LTE Rx antenna uses a RF MEMS(Micro-Electro mechanical system) to match the impedances to realize the bands of interest. Because the two proposed antennas are polarized orthogonally to each other, the ECC(Envelope Correlation Coefficient) characteristic between two antennas was measured to be very low (below 0.06) with an isolation characteristic below -20 dB between the two antennas in the operating overall LTE bands. The proposed antenna is particularly attractive for mobile devices that integrate LTE multiple systems.

• ETRI Journal
• /
• v.36 no.1
• /
• pp.62-68
• /
• 2014

This paper presents a novel user selection method based on the signal-to-interference-plus-noise ratio (SINR), which is approximated using limited feedback data at the base stations (BSs) of multiple user multiple-input multiple-output (MU-MIMO) systems. In the proposed system, the codebook vector index, the quantization error obtained from the correlation between the measured channel and the codebook vector, and the measured value of the largest singular value are fed back from each user to the BS. The proposed method not only generates precoding vectors that are orthogonal to the precoding vectors of the previously selected users and are highly correlated with the codebook vector of each user but also adopts the quantization error in approximating the SINR, which eventually provides a significantly more accurate SINR than the conventional SINR-based user selection techniques. Computer simulations show that the proposed method enhances the sum rate of the conventional SINR-based methods by at least 2.4 (2.62) bps/Hz when the number of transmit antennas and number of receive antennas per user terminal is 4 and 1(2), respectively, with 100 candidate users and an SNR of 30 dB.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.10
• /
• pp.11-20
• /
• 2014

In this paper, a novel transmission scheme is proposed to improve the data rates of spatial modulation (SM) which has low complexity and improves the spectral efficiency in correlated channel environments. The conventional SM scheme utilizes partial multiple antennas to transmit signal constellations and additional bits using antenna combinations. Therefore the channel capacity of SM is less than that of the conventional multiple input-multiple output (MIMO) scheme which uses all the available antennas. In this paper, an SM transmission scheme is proposed to improve the channel capacity using a tight frame pre-coder. The improvement in channel capacity of the SM scheme will be shown using computer simulations.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.5
• /
• pp.520-530
• /
• 2016

Since FDD massive MIMO (multiple-input multiple-output) system deploys hundreds of transmit antennas at base station (BS) compared to conventional MIMO system, the overhead of transmitting channel state information reference signal (CSI-RS) increases proportionally to the number of transmit-antennas. To overcome these disadvantages, we proposed beamforming based CSI-RS transmission technique for FDD massive MIMO system which transmit CSI-RS by limited amount of downlink resources.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.6A
• /
• pp.624-631
• /
• 2007

This paper presents inter-cell cooperation methods with two transmit antennas for broadcast services in a coded OFDM cellular system. In the method, cells are divided into multiple cell groups and a coded packet is partitioned into the subparts. Then, a different cell group and antenna combination is assigned to each subpart for transmission of two orthogonal branches of the diversity code. For the method, we derive the bound on the pairwise error probability to predict the coded performance and verify the performance gain of the proposed method through the simulation using turbo code and analytically derived bound.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37A no.12
• /
• pp.1065-1075
• /
• 2012

For the purpose of providing high data rate real-time services, radio transmission technologies (RTT) for ship ad-hoc network (SANET) based on the Recommendation ITU-R 1842-1 are designed. Physical layer parameters of SANET are contrived to meet the requirements of the specification. In order to improve the link reliability for SANET, in this paper, we investigate the performance of the SANET with the multiple antennas, where receive combining (RC), transmit diversity (TD), and beamforming (BF) are employed, respectively. Based on the analysis of the packet error rate (PER) under the highly correlated maritime wireless channel model, we select the efficient multiple antenna schemes for SANET to improve the link reliability. In addition, the optimal MCS levels for the single-carrier (SC) SANET with the bandwidth of 25 kHz, and the multi-carrier (MC) SANET with the bandwidth of 50 kHz and 100 kHz are finalized.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.13 no.1
• /
• pp.237-253
• /
• 2019

For massive multiple-input multiple-output (MIMO) circumstances with time division duplex (TDD) protocol, pilot contamination becomes one of main system performance bottlenecks. This paper proposes an uplink pilot sequence assignment to alleviate this problem for spatially correlated massive MIMO circumstances. Firstly, a single-cell TDD massive MIMO model with multiple terminals in the cell is established. Then a spatial correlation between two channel response vectors is established by the large-scale fading variables and the angle of arrival (AOA) span with an infinite number of base station (BS) antennas. With this spatially correlated channel model, the expression for the achievable system capacity is derived. To optimize the achievable system capacity, a problem regarding uplink pilot assignment is proposed. In view of the exponential complexity of the exhaustive search approach, a pilot assignment algorithm corresponding to the distinct channel AOA intervals is proposed to approach the optimization solution. In addition, simulation results prove that the main pilot assignment algorithm in this paper can obtain a noticeable performance gain with limited BS antennas.