• Journal of Satellite, Information and Communications
• /
• v.5 no.1
• /
• pp.32-37
• /
• 2010

The algorithm of multiple channel signal processing requires the flexibility of variable frequency band, efficient allocation of transmission power, and flexible frequency band reallocation to satisfy various service types which requires different transmission rates and frequency band. There are three methods including per-channel approach, multiple tree approach, and block approach performing frequency band reallocation method by channelization and dechannelization in the multiple-channel signal. This paper proposes an improved per-channel approach for converting the frequency band of multiple carrier signals efficiently. The proposed algorithm performs decimation and interpolation using CIC(cascaded integrator comb filter), half-band filter, and FIR filter. In addition, it performs filtering of each sub-channel, and reallocates channel band through FIR low-pass filter in the multiple-channel signal. The computer simulation result shows that the perfect reconstruction of output signal and the flexible frequency band reallocation is performed efficiently by the proposed algorithm.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.2
• /
• pp.277-282
• /
• 2005

The arrangement of I-picture starting times of multiplexed variable bit .ate (VBR) MPEG videos may significantly affect the cell loss ratio (CLR) characteristics of the multiplexed traffic. This paper presents an efficient I-picture arrangement method which can minimize the CLR of the multiplexed traffic when multiple VBR MPEG videos are multiplexed onto a single constant bit rate link. In the proposed method, we use the probability that the arrival rate exceeds the link capacity as the measure for the CLR of the multiplexed traffic. Simulation results show that the proposed method can find more optimal arrangement than existing methods in respect of the CLR.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.39 no.3
• /
• pp.191-200
• /
• 2002

In this paper, we present the method transforming the interval functions into the truncated difference functions for multi-variable multi-valued functions and implementing the truncated difference functions to the multiple valued logic circuits with uniform patterns using the current mirror circuits and the inhibit circuits by current-mode CMOS. Also, we apply the presented methods to the implementation of circuits for additive truth table of 2-variable 4-valued MOD(4) and multiplicative truth table of 2-variable 4-valued finite fields GF(4). These circuits are simulated under 2${\mu}{\textrm}{m}$ CMOS standard technology, 15$mutextrm{A}$ unit current, and 3.3V power supply voltage using PSpice. The simulation results have shown the satisfying current characteristics. Both implemented circuits using current-mode CMOS have the uniform Patterns and the regularity of interconnection. Also, it is expansible for the variables of multiple valued logic functions and are suitable for VLSI implementation.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.62-62
• /
• 2010

Photonic quasi-crystals(PQCs) have been fabricated by a multiple-exposure nanosphere lithography (MENSL) method using the self-assembled nanospheres as lens-mask patterns. The multiple-exposing source is collimated laser beam and rotation, tilting system. The arrays of the PQCs exhibited variable lattice structures and shape the control of ratating angle ($\theta$), tilting angle ($\gamma$) and the exposure conditions. The used nanosphere size is upto the $1\;{\mu}m$. Images of prepared 2D PQCs were observed by SEM. We believe that the MENSL method is a suitable useful tool to realize the PQCs arrays of large area.

• Industrial Engineering and Management Systems
• /
• v.9 no.2
• /
• pp.107-120
• /
• 2010

In today's uncertain economic environment, the evaluation of safety for investment alternatives is of practical importance in manufacturing companies. This paper examines a method of quantitatively evaluating profitability and risk for multiple alternatives using the total-cost unit-cost domain. The paper assumes such factors as unit sales price, sales and production volume, unit variable cost, fixed cost, and yield for each alternative. The paper incorporates the relationship between production capacity and demand, distinguishing between cases of production capacity surplus and shortage for each year over the entire planning horizon. The paper investigates the case in which the values of each factor independently move in the direction of decreasing profit each year, and clarifies the procedure of comparing safety among multiple investment alternatives on a single consolidated total-cost unit-cost domain. The difficulty of the problem lies in the method of consolidating multiple total-cost unit-cost domains into a single domain since the combination of years of capacity surplus and shortage depends upon the change values in each factor under consideration. A systematic method of evaluating profitability as well as risk is presented, and the validity of the proposed method is verified using a numerical example.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.17 no.6
• /
• pp.589-594
• /
• 1992

This paper offers the simplification method of Multiple-Valued logic function based on M-AND,M-OR, NOT operation presented by Lukasiewicz. First in performing the simplification the result is different by the method to arrange Cube, the method to find the most effective adjacent term if, most of all, important in simplification. According to this method, the two-variable multiple-valued logic function given by truth table is decomposed. The simplification method in this paper proves that the number of devices and cost is considerably reduced comparing with the existing method 141 to realize the same logic functions.

• Korean Journal of Mathematics
• /
• v.19 no.1
• /
• pp.101-109
• /
• 2011

We get a theorem which shows that there exist at least two or three nontrivial weak solutions for the nonlinear parabolic boundary value problem with the variable coefficient jumping nonlinearity. We prove this theorem by restricting ourselves to the real Hilbert space. We obtain this result by approaching the topological method. We use the Leray-Schauder degree theory on the real Hilbert space.

• Journal of applied mathematics & informatics
• /
• v.5 no.1
• /
• pp.1-12
• /
• 1998

We consider G/M/1 queues with multiple vacation disci-pline where at the end of every busy period the server stays idle in the system for a period of time called changeover time and then follows a vacation if there is no arrival during the changeover time. The vaca-tion time has a hyperexponential distribution. By using the methods of the shift operator and supplementary variable we explicitly obtain the queue length probabilities at arrival time points and arbitrary time points simultaneously.

• Journal of Institute of Control, Robotics and Systems
• /
• v.9 no.2
• /
• pp.159-167
• /
• 2003

This study suggests the hybrid fault diagnosis method of signed digraph (SDG) and partial least squares (PLS). SDG offers a simple and graphical representation for the causal relationships between process variables. The proposed method is based on SDG to utilize the advantage that the model building needs less information than other methods and can be performed automatically. PLS model is built on local cause-effect relationships of each variable in SDG. In addition to the current values of cause variables, the past values of cause and effect variables are inputted to PLS model to represent the Process armies. The measured value and predicted one by dynamic PLS are compared to diagnose the fault. The diagnosis example of CSTR shows the proposed method improves diagnosis resolution and facilitates diagnosis of masked multiple-fault.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.66 no.7
• /
• pp.1053-1058
• /
• 2017

In this paper, the design of iron loss minimization of 600W was performed by using Quasi-Newton method. Stator shoe, the width of stator teeth and yoke, and the length of d-axis flux path were selected as design parameters, and the output characteristics according to each design variable were considered. The objective function was set to minimize iron loss. Using the Quasi-Newton method, the variables converged to the target value while changing simultaneously and multiple times. As the algorithm advanced optimization, the correlation with the behavior of each variable was compared and analyzed.