• Industrial Engineering and Management Systems
• /
• v.3 no.1
• /
• pp.38-51
• /
• 2004

Over the years, most or many companies have focused their attention to the effectiveness and efficiency of their business units. As a new way of doing business, these companies have begun to realize the strategic importance of planning, controlling, and designing their own supply chain system. This paper analyzes the coordination issues in supply chains that consist of one manufacturer and multiple retailers operating under uncertain end customer demand and delivery lead-time. We use the Genetic Algorithm (GA) to determine the appropriate ordering and inventory level at which the manufacturer and multiple retailers can maximize the profit of the chain. This is performed under three controlling policies: the traditionally centralized controlling policy under the manufacturer's perspective, the entire chain’s perspective, and lastly the coordinating controlling policy with an incentive scheme. The outcome from the study reveals that the coordinating controlling policy with an incentive scheme can outperform the traditional centralized controlling policies by creating a win-win situation in which all members of the chain benefit from higher profit, thus resulting in more willingness from all members to join the chain.

• Proceedings of the KIPE Conference
• /
• 2008.06a
• /
• pp.360-362
• /
• 2008

In this paper, an improved full bridge inverter is presented to get multiple output for UV lamp and barrier discharge. It has a structure of two equivalent half bridge inverters and one full bridge inverter. The outputs of the proposed circuit can be controlled using frequency and PWM independently. To verify the proposed circuit, theoretical analysis and experimental results has been done using a prototype power supply.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.4 no.6
• /
• pp.589-600
• /
• 1999

Audible noise of UPS(uninterruptible power supply) with small rated [Xlwer is usually generattxl by the c cooling fan‘ For active noise control for radiated noise of UPS, it is adequate to apply multiple-channel F FXLMS algorithm based on Filten어 x LM~longrightarrow algorithm. In this paper, to reduce the audible noise of UPS‘ Its m noise characteristics of UPS are an띠yzed and active noise control by using 이ffiMOClVlultiple- Reference/ M Multiple-Output) FXLMS algorithm is perf‘onned. Also, noise reduction characteristics are shown by computer S simulation and experimental results.

• Journal of Korean Society of Water and Wastewater
• /
• v.21 no.5
• /
• pp.609-619
• /
• 2007

The objective of this paper is to evaluate the feasibility of conjunctive Operation between Multi-regional water supply networks from multiple source as a effective way to meet two conditions: to minimize the electric cost for providing water demanded and meet the water flow rate for satisfying customers. EPAnet Model is used to calculate a hydraulic water distribution condition based on an integrated operation of water supply systems located in short distance. The modeling was conducted on several simulation cases including the individual operation by existing inter-regional water supply networks within short distance, the conjunctive operation of more than two existing networks with valve fully closed and full open constraint. As a study distribution system, water supplying systems of the Geojae-city in the Geongsang Namdo Province was selected and investigated. It was found that a well-allocated water supply scheme based on a conjunctive operation promises to save the electric cost and satisfy all operational goals such as stability and revenues during the period. The result such as unit district costs, pareto optimum pump combination sets will be applied to the optimization for a conjunctive operation of existing inter-regional water supply networks within short distance.

• Proceedings of the KIPE Conference
• /
• 2000.07a
• /
• pp.501-504
• /
• 2000

In this paper the PC power supply is studied from the point of system stability. The power stage model of a multiple output forward converter with weighted voltage mode control is derived including all the major parasitic components and the small signal model is also derived. Determination of the weighting factors and a design procedure for the loop compensation are presented. Finally the model is verified through the simulation of three output forward converter with SABER.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.22 no.5
• /
• pp.31-40
• /
• 2008

Recently, Contactless Power Supply(CPS) system has been broadly studied as a power supply system for Flat Panel Display(FPD) material transfer equipments. In mass production line, CPS systems on material transfer equipment are applied only in the straight sections with single operating vehicle. The formal CPS system was not adequate for curved section nor multiple operating vehicles. Therefore, this paper presents CPS system that consists of straight and curved section with multiple operation vehicles. The circuit topology of CPS system consists of full bridge configured serial-parallel resonant DC/DC converter. The control method for CPS system consists of duty control method on the primary power supply system to maintain constant resonant current. And the secondary power supply systems of multiple vehicles are self controled to maintain constant output voltage. Practically, the test result of dual vehicles on straight and curved section of material transfer equipments were satisfactory, and proved it's applicability on commercial use.

• Management Science and Financial Engineering
• /
• v.6 no.2
• /
• pp.1-28
• /
• 2000

Supply chain management issues faced by a manufacturing company are considered in this paper. The supply chain consists of a manufacturing company and its suppliers. The manufacturer produces multiple products with inputs (e.g., raw materials) from the suppliers, but each product needs a different mix of these inputs. The market demand for the products is uncertain. We develop a mathematical model and algorithm, which can help the manufacturer to solve its procurement decision problem: how much of raw material to order from which supplier. The model incorporates such factors as market demand uncertainty, product's input requirement, supplier's as well as manufacturer's capacity, plus other costs comparable with those in a typical newsboy problem. Numerical examples are presented to see the interacting effects among critical parameters and variables.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.34 no.4
• /
• pp.25-34
• /
• 2011

In this paper, we investigate an inventory system where a single manufacturer purchases and processes raw materials in order to deliver finished goods to multiple retailers. Earlier study in this type of supply chain only consider a single raw material in order to produce finished goods, but we consider multi-raw materials in order to produce finished goods. Also, we develop an iterative solution procedure to find the order quantity for the finished goods and raw materials, and the number of shipments between manufacturer and retailers that minimizes the total cost per unit time of the raw materials ordering and holding, manufacture's setup and finished goods holding, the retailer's ordering and inventory holding. Numerical examples are presented to illustrate that jointly considering the total cost results in less total cost than that of considering them separately.

• Journal of Electrical Engineering and Technology
• /
• v.9 no.3
• /
• pp.1132-1136
• /
• 2014

In the context of increasing electric energy consumption in a data center, energy efficiency improvement is strongly emphasized. In a data center, electric energy is largely consumed by DC power supply system, which is based on a rectifier composed by multiple parallel converters. Therefore, rectifier efficiency must be improved for minimizing loss of DC power supply system. Rectifier efficiency can be modulated by load allocation to converters because converter efficiency depends on input AC power. In this paper, we propose a new control method to maximize rectifier efficiency. The method can control load allocation to converters by introducing active power converter control scheme and start-and-stop of converters. In order to illustrate optimal load allocations in a rectifier, a maximization problem of rectifier efficiency is formulated as a nonlinear optimization one. The problem is solved by Lagrangian relaxation method and the computation results provide the validity of proposed method.

• IE interfaces
• /
• v.24 no.1
• /
• pp.51-57
• /
• 2011

The traveling purchaser problem (TPP) is a generalization of the well-known traveling salesman problem (TSP), which has many real-world applications such as purchasing the required raw materials for the manufacturing factories and the scheduling of a set of jobs over some machines, and many others. In the last decade, TPP has received some attention of the researchers in the operational research area. However, all of the past researches for TPP are restricted on a single purchaser (vehicle). It could be the limitation to solve the real world problem. The purpose of this paper is to suggest the capacitated multiple TPP (CMTPP). It could be used in inbound logistics optimization in supply chain management area and many others. Since TPP is known as NP-hard, we also developed the heuristic algorithm to solve the CMTPP.