• Korean Journal of Soil Science and Fertilizer
• /
• v.23 no.3
• /
• pp.173-179
• /
• 1990

The effect of a highly water absorbing polyacrylate polymer, commonly called K-sorb, at rates of 0.0, 0.05, 0.2, and 0.5% by weight on the water retention properties of three soils, and the longevities of these treatment effects were evaluated. Water retentions were measured for all the treatments by use of a pressure-plate extractor in the laboratory. Available water and three-phase distributions at moisture tensions of 0.01, 0.3, and 15b were calculated from water retentivity data. A randomized block experiment of Chinese cabbages was conducted to examine the effects and the longevities of the treatments(0.0, 0.05, 0.1, and 0.2%) on water retention of Jungdong sandy loam soil in the field. Water retentions for a loamy sand, sandy loam, and loam soil, treated with 0.2 and 0.5% K-sorb, were increased. K-sorb treatments were more effective in sandy soil than in loamy soils. Water contents for the 0.5% treatment were markedly greater than those for the 0.2% treatment at earth moisture tension. K-sorb only at a rate of 0.5% remained effective in water retention of each soil through repeated drying and wetting for 12 months. Duncan's multiple range showed 0.2% treatment was effective(at the level of 0.05) after 2 months but not after 10 months under field condition.

• Journal of Animal Science and Technology
• /
• v.44 no.5
• /
• pp.507-518
• /
• 2002

A multiple-trait stochastic computer simulation model was constructed to predict the breeding schemes and selection methods on Hanwoo(Korean cattle). The model could be used four kinds of selection criteria (random, phenotype and true or estimated breeding values). At the test run in various population size for 20 years, all estimated parameters of the each simulated populations were resulted similar to input parameters. The deviations between input and output values of parameter in the large population were smaller than in the small population. The simulated results obtained from ten small populations consisted with one sire and ten dams in each population for 500 years were as follows; Inbreeding coefficients of population were similar to theoretical estimating function. Mean values of each traits selected were randomly drifted by generation, but they were converged into a value when inbreeding coefficients came close to one. Additive genetic variances within each population were reduced by generation, and they were converged into zero when inbreeding coefficients came close to one. These results indicated that the simulated populations hold to statistical properties of input parameters.

• Journal of Biomedical Engineering Research
• /
• v.38 no.1
• /
• pp.43-48
• /
• 2017

Chemotherapy, radiation therapy, and surgery are major methods to treat cancer. However, current cancer treatments report severe side effects and high recurrences. Recent studies about engineering nanoparticles as a drug carrier suggest possibilities in terms of specific targeting and spatiotemporal release of drugs. While many nanoparticles demonstrate lower toxicity and better targeting results than free drugs, they still need to improve their performance dramatically in terms of targeting accuracy, immune responses, and non-specific accumulation at organs. One possible way to overcome the challenges is to make precisely controlled nanoparticles with respect to size, shape, surface properties, and mechanical stiffness. Here, we demonstrate $500{\times}200nm$ discoidal polymeric nanoconstructs (DPNs) as a drug delivery carrier. DPNs were prepared by using a top-down fabrication method that we previously reported to control shape as well as size. Moreover, DPNs have multiple payloads, poly lactic-co-glycolic acid (PLGA), polyethylene glycol (PEG), lipid-Rhodamine B dye (RhB) and Salinomycin. In this study, we demonstrated a potential of DPNs as a drug carrier to treat cancer.

• Journal of KIISE:Computer Systems and Theory
• /
• v.35 no.5
• /
• pp.213-222
• /
• 2008

This paper is related to color image segmentation and textile texture mapping for the 2D virtual wearing system. The proposed system is characterized as virtually wearing a new textile pattern selected by user to the clothing shape section, based on its intensity difference map, segmented from a 2D clothes model image using color image segmentation technique. Regardless of color or intensity of model clothes, the proposed system is possible to virtually change the textile pattern or color with holding the illumination and shading properties of the selected clothing shape section, and also to quickly and easily simulate, compare, and select multiple textile pattern combinations for individual styles or entire outfits. The proposed system can provide higher practicality and easy-to-use interface, as it makes real-time processing possible in various digital environment, and creates comparatively natural and realistic virtual wearing styles, and also makes semi-automatic processing possible to reduce the manual works to a minimum. According to the proposed system, it can motivate the creative activity of the designers with simulation results on the effect of textile pattern design on the appearance of clothes without manufacturing physical clothes and, as it can help the purchasers for decision-making with them, promote B2B or B2C e-commerce.

• Steel and Composite Structures
• /
• v.35 no.6
• /
• pp.799-813
• /
• 2020

Fatigue cracks of rib-to-deck (RD) joints have been frequently observed in the orthotropic steel decks (OSD) using conventional U-ribs (CU). Thickened edge U-rib (TEU) is proposed to enhance the fatigue strength of RD joints, and its effectiveness has been proved through fatigue tests. In-depth full-scale tests are further carried out to investigate both the fatigue strength and fractography of RD joints. Based on the test result, the mean fatigue strength of TEU specimens is 21% and 17% higher than that of CU specimens in terms of nominal and hot spot stress, respectively. Meanwhile, the development of fatigue cracks has been measured using the strain gauges installed along the welded joint. It is found that such the crack remains almost in semi-elliptical shape during the initiation and propagation. For the further application of TEUs, the design curve under the specific survival rate is required for the RD joints using TEUs. Since the fatigue strength of welded joints is highly scattered, the design curves derived by using the limited test data only are not reliable enough to be used as the reference. On this ground, an experiment-numerical hybrid approach is employed. Basing on the fatigue test, a probabilistic assessment model has been established to predict the fatigue strength of RD joints. In the model, the randomness in material properties, initial flaws and local geometries has been taken into consideration. The multiple-site initiation and coalescence of fatigue cracks are also considered to improve the accuracy. Validation of the model has been rigorously conducted using the test data. By extending the validated model, large-scale databases of fatigue life could be generated in a short period. Through the regression analysis on the generated database, design curves of the RD joint have been derived under the 95% survival rate. As the result, FAT 85 and FAT 110 curves with the power index m of 2.89 are recommended in the fatigue evaluation on the RD joint using TEUs in terms of nominal stress and hot spot stress respectively. Meanwhile, FAT 70 and FAT 90 curves with m of 2.92 are suggested in the evaluation on the RD joint using CUs in terms of nominal stress and hot spot stress, respectively.

• Journal of Korean Society of Environmental Engineers
• /
• v.32 no.1
• /
• pp.47-52
• /
• 2010

Physical, chemical and biological properties of soils and cadmium(Cd) content of Artemisia princeps var. orientalis collected from 10 metalliferous mines were analysed. Cd contents of unplanted soils and rhizosphere soils were not significantly different(p < 0.05), and mean values were 5.92 and 5.91 mg/kg, respectively. In addition, Cd content of rhizosphere soils were correlated with Cd content of Artemisia princeps (p < 0.05, ${R^2}_{shoot}$ = 0.3120, ${R^2}_{root}$ = 0.4177). Minimum data set(MDS) of soil quality parameters for statistical assessment of Cd uptake was established by principal component analysis, and it was identified as organic matter(OM), dehydrogenase activity(DHA), pH, exchangeable Mg. According to multiple regression analysis using the MDS, coefficients of determination ($R^2$) for Cd uptake of shoot and root of Artemisia princeps were found to be 0.3418 and 0.5121, respectively. This suggests that statistical soil quality assessment using the MDS seems a useful tool to interpret heavy metal uptake of plant.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.8 no.4
• /
• pp.67-74
• /
• 2008

Because the fire service demands are increasing and forms are diversified, the first thing you must do is to make up the fire service budget to keep fire service power sufficiently. Such budget allocation leads to supply enough fire service people want and results in social welfare satisfaction. If the budget of fire service is not enough to meet with its power, sufficient security of the fire fighters would be impossible. Also, when the urgent disasters occur, the government cannot cope with them effectively. In fact, loss of many lives and properties took place in some cities and kuns because of that. The purpose of this study is to investigate the influence of fire service budget for fire service force. To do this, this study reviews fire service budget, fire service force. And this study sets up three hypotheses based on the theoretical backgrounds and the past research. The statistical method used for the verification of hypotheses is multiple regression analysis. The analysis showed that fire service budget per head variable was positive significant, fire service budget ratio variable was not significant. Also, public facilities tax variable was negative significant. Therefore, the analysis showed that public facilities tax couldn't fill the role as a earmarked tax.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.4
• /
• pp.161-166
• /
• 2018

In this paper, we propose a method for the random selection of pooling operations for the regularization and reduction of cross validation in convolutional neural networks. The pooling operation in convolutional neural networks is used to reduce the size of the feature map and for its shift invariant properties. In the existing pooling method, one pooling operation is applied in each pooling layer. Because this method fixes the convolution network, the network suffers from overfitting, which means that it excessively fits the models to the training samples. In addition, to find the best combination of pooling operations to maximize the performance, cross validation must be performed. To solve these problems, we introduce the probability concept into the pooling layers. The proposed method does not select one pooling operation in each pooling layer. Instead, we randomly select one pooling operation among multiple pooling operations in each pooling region during training, and for testing purposes, we use probabilistic weighting to produce the expected output. The proposed method can be seen as a technique in which many networks are approximately averaged using a different pooling operation in each pooling region. Therefore, this method avoids the overfitting problem, as well as reducing the amount of cross validation. The experimental results show that the proposed method can achieve better generalization performance and reduce the need for cross validation.

• Journal of Global Scholars of Marketing Science
• /
• v.17 no.1
• /
• pp.23-49
• /
• 2007

The purpose of this study is to investigate the relationships among customer satisfaction, trust, and loyalty and examine the differences and similarities between specialized and general merchandise internet shopping malls concerning the relationships of these key success factors. The structural model is tested with each of the sub-samples(i.e., specialized and general merchandise shopping customers taken separately) and the data from entire data samples(i.e., specialized and general merchandise shopping customers pooled together). The same research model was used in analysing general merchandise, specialized, and integrated internet shopping mall to reveal and compare the casual path constructs. In the analysis of path coefficients composed of separated taken sample, all research hypothesis is accepted and the model's goodness of fit also shows all high. In the basis of the previous empirical test, multiple sample method was used. Properties of the causal paths, including standardized path coefficients, the significance of difference, latent correlations and variance explained for satisfaction, trust and loyalty in the hypothesized model, have similarities in general. This means that the proper structural management concerned with customer satisfaction, trust and loyalty is very crucial for the success of all kinds of internet shopping malls. Following the model test, I conduct a test of integrated model's path coefficients. Statistical results show that all the hypothesis concerned with internet shopping malls were accepted like the separated sample test. Click and mortar companies should clearly understand and articulate the key requirements of shopping mall satisfaction, trust and loyalty and encourage to establish linkage and interactive relationship among the research variables. In addition, internet marketers are required to customize the interaction considering and adapting the patterns of internet shopping malls. Other interesting results concerning the strategies in internet shopping malls strategy are also presented.

• Publications of The Korean Astronomical Society
• /
• v.30 no.3
• /
• pp.821-832
• /
• 2015

As a part of the short-period variability survey (SPVS) at Bohyunsan Optical Astronomy Observatory, we obtained time-series BV CCD images in the region of the open cluster NGC 1039 (M34). The observations were performed for 22 nights from July 29, 2008 to September 26, 2010. We also made LOAO observations for 10 days from September 18, 2009 to October 30, 2010 to confirm the small variabilties of ${\delta}$ Scuti-type variable stars. In this paper we presented the observational properties of 28 variable stars found in the region. They are seven ${\delta}$ Scuti-type variable stars, two ${\gamma}$ Doradus-type variable stars, four-teen eclipsing binary stars and five semi-long periodic or slow irregular variables, respectively. Only three variables were listed in the GCVS and the rest are newly discovered ones. We have performed multiple-frequency analysis to determine pulsation frequencies of the ${\delta}$ Scuti-type and ${\gamma}$ Doradus-type variable stars, using the discrete Fourier transform and linear least-square fitting methods. We also have derived the periods and amplitudes of 12 eclipsing binaries from the phase fitting method, and presented the light curves of all variable stars.