• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.2
• /
• pp.202-207
• /
• 2010

In this paper, a novel voltage-controlled oscillator(VCO) using the open loop multiple split ring resonator(OLMSRR) is presented for improving the phase noise, implemented in 130 nm CMOS technology. Compared with the conventional CMOS LC resonator, the proposed CMOS OLMSRR has the larger coupling coefficient value, which makes a higher Q-factor, and has improved the phase noise of the VCO. The proposed CMOS VCO based OLMSRR has the phase noise of -99.67 dBc/Hz @ 1 MHz in the oscillation frequency. Compared with the VCO using the conventional CMOS LC resonator and the proposed VCO using the CMOS OLMSRR structure has been improved in 7 dB. The prototype 24 GHz CMOS VCO is implemented in 130 nm CMOS and occupies a compact die area of $0.7\;mm{\times}0.9\;mm$.

• The Journal of the Korea Contents Association
• /
• v.12 no.5
• /
• pp.1-9
• /
• 2012

The popularity of digital music and smart phones led to develope noise-robust real-time audio fingerprinting system in various ways. In particular, The Multiple Hashing(MLH) of fingerprint algorithms is robust to noise and has an elaborate structure. In this paper, we propose a filter engine based on MLH to achieve better performance. In this approach, we compose a energy-intensive filter to improve the accuracy of Q/R from music database and a statistic filter to remove continuity and redundancy. The energy-intensive filter uses the Discrite Cosine Transform(DCT)'s feature gathering energy to low-order bits and the statistic filters use the correlation between searched fingerprint's information. Experimental results show that the superiority of proposed algorithm consists of the energy and statistical filtering in noise environment. It is found that the proposed filter engine achieves more robust to noise than Philips Robust Hash(PRH), and a more compact way than MLH.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.8
• /
• pp.3053-3059
• /
• 2010

In DS-CDMA method, Mobile Stations own jointly one radio channel and are made to use a PN code (Pseudo-Noise Code) for the purpose of minimize interference. However, corelation value of PN code is one when time delay is zero but the corelation value is 1 / N when time delay is not 0. Therefore corelation characteristic does not fully attained. As a result, when the user increase, the performance degradation and system capacity problem will be able to occur by interference among users. In this paper, the PN code has ideally self corelation. It was proved that PN code could depress interference from other users in multiple access system.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.2C
• /
• pp.187-198
• /
• 2004

In this paper, we analyze the performance of BPM (Bi-Phase Modulation) UWB (Ultra Wide Band) multiple access system using PN (Pseudo Noise) code based time hopping sequence in indoor wireless channels. In particular, we compare BPM UWB multiple access system with PPM (Pulse Position Modulation) UWB multiple access system in terms of signalling and demodulation schemes. Moreover, we analytically evaluate the performance of these UWB systems by deriving the bit error rate expressions under the assumption that pulse energy and data transmission rate are identical for both systems. Simulation results in additive white Gaussian noise and realistic indoor multipath wireless channels show that the performance of BPM scheme is approximately 1 dB better than that of PPM scheme. However, the performance discrepancy becomes negligible as the number of users increases.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.39 no.9
• /
• pp.28-36
• /
• 2002

As cross-coupling capacitance generated in transmission line has been an important issue in VLSI world, a couple of ATPG algorithms has been proposed. However they were studied only for a simple single-line effect problem, so it cost so much time for an unsatisfying test generation efficiency. In this paper, we studied a noise model for multiple affected lines and generated test patterns in a short time. This paper proposes a crosstalk model affected by multiple tranmission lines and implemented an ATPG algorithm for detection of crosstalk noise faults. We modeled the crosstalk noise by multiple transmission line and made a truth table for this. We implemented an ATPG algorithm based on PODEM and revealed the results.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.49 no.6
• /
• pp.489-496
• /
• 2021

The X-band frequencies for transmitting the data from earth observation satellites are limited, so a number of satellites share the frequency bands. In order for multiple satellites to utilize same or adjacent frequency bands, International Telecommunication Union - Radiocommunication (ITU-R) limits power flux density (PFD), which overcomes the interferences among multiple satellites. However, even under the regulation, the interference effect needs to be analyzed when multiple satellites are connected to communicate with multiple ground stations (GSs) located close to each other. In this paper, the interference effect is analyzed based on signal to interference plus noise ratio (SINR) when two low earth orbit (LEO) satellites operating in different orbits are connected to communicate with randomly located two GSs in Korean peninsula. From the analysis results, it is confirmed that there can be interferences during 365 days operation even if the satellites meet PFD requirement, but the periods under interference effects are short and the interference can be foreseen.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.36 no.4
• /
• pp.233-242
• /
• 2023

The unscented Kalman filter (UKF), which is widely used to estimate the states of nonlinear dynamic systems, can be improved to realize robust system identification by using multiple sigma-point sets. When using Kalman filter methods for system identification, artificial noises must be appropriately selected to achieve optimal estimation performance. Additionally, an appropriate scaling factor for the sigma-points must be selected to capture the nonlinearity of the state-space model. This study entailed the use of Bouc-Wen hysteresis model to examine the nonlinear behavior of a single-degree-of-freedom oscillator. On the basis of the effects of the selected artificial noises and scaling factor, a new UKF method using multiple sigma-point sets was devised for improved robustness of the estimation over various signal-to-noise-ratio values. The results demonstrate that the proposed method can accurately track nonlinear system states even when the measurement noise levels are high, while being robust to the selection of artificial noise levels.

• Proceedings of the IEEK Conference
• /
• 2000.11d
• /
• pp.17-20
• /
• 2000

This paper describes a shape-based object recognition algorithm using multiple distance images. For the images containing dense edge points and noise, previous Hausdorff distance (HD) measures yield a high ms error for object position and many false matchings for recognition. Extended version of HD measure considering edge position and orientation simultaneously is proposed for accurate matching. Multiple distance images are used to calculate proposed matching measure efficiently. Results are presented for visual images and infrared images.

• ETRI Journal
• /
• v.28 no.4
• /
• pp.513-516
• /
• 2006

Experimental demonstration of bipolar spectral encoding code-division multiple-access with modified pseudorandom noise codes is presented. Bipolar spectral encoding is achieved with an erbium-doped fiber amplifier amplified spontaneous emission source and arrayed waveguide gratings. The bit-error rate performance of 1.25 Gbps signal transmission over 80 km single mode fiber is measured in a multiple-user environment.

• Journal of the Korean Data and Information Science Society
• /
• v.14 no.3
• /
• pp.545-551
• /
• 2003

Robust design is to identify appropriate settings of control factors that make the system's performance robust to changes in the noise factors that represent the source of variation. In this paper we propose how to simultaneously optimize multiple quality characteristics using the principal component analysis of multivariate statistical analysis. An example is illustrated to compare it with already proposed method.