• The Bulletin of The Korean Astronomical Society
• /
• v.36 no.2
• /
• pp.84.1-84.1
• /
• 2011

In this study, we intend to inquire of how the temporal variation and spatial distribution of magnetic helicity injection in a CME-producing solar active region are related to the CME occurrence. We therefore investigate long-term (a few days) variation of magnetic helicity injection in the active region NOAA 9236 which produced multiple CME events. As a result, it is found that a noticeable increase in helicity of negative sign was first made for the first ~1.5 days and then 6 CMEs occurred while the relatively more injection of oppositely signed (positive) helicity was taking place for the next ~2 days. Afterwards, 2 CMEs in the region occurred while a more negative helicity is being injected again compared to a positive helicity. In addition, from helicity flux density maps, we found that the CMEs originated from this active region seem to be involved with the interaction of two magnetic field systems characterized by opposite signs of helicity.

• Journal of the Semiconductor & Display Technology
• /
• v.6 no.1 s.18
• /
• pp.59-64
• /
• 2007

Non-contact transportation of a large-sized glass plate using air cushion for the vertical sputtering system of liquid crystal display (LCD) panel was considered. The objective of the study was to design an air pad unit which was composed of multiple injection and exhaust holes and mass flow supplying pipe. The gas was injected through multiple small holes to maintain the force for levitating glass plate. After hitting the plate, the air was vented through exhaust holes. Complex flow field and resulting pressure distribution on the glass surface were numerically studied to design the air injection pad. The exhaust hole size was varied to obtain evenly distributed pressure distribution at fixed diameter of the injection hole. Considering the force for levitating glass plate, the diameter of the exhaust hole of 30 to 40 times of the gas injection hole was recommended.

• Journal of Broadcast Engineering
• /
• v.27 no.1
• /
• pp.146-149
• /
• 2022

In this letter, we propose low-complexity Hybrid-Partial-Gaussian-Approximation (HPGA) decoding methods for core-layer signal of Layered-Division-Multiplexing Multiple-Inputs-Multiple- Outputs ATSC 3.0 broadcasting systems. The proposed HPGA decoding methods have an advantage of being able to greatly reduce decoding complexity without significant performance degradation compared to a conventional PGA method, by selectively using existing GA and PGA methods according to a received injection-level at an each receive antenna.

• Journal of Korea Water Resources Association
• /
• v.48 no.10
• /
• pp.869-877
• /
• 2015

Freshwater may be injected into aquifers to combat sea water intrusion in groundwater or to store water for later retrieval. For these cases to achieve the desired goal groundwater modeling is commonly used to determine locations and rates of injection wells. When these wells are connected to a pipe network, a flow control valve is installed for each well to regulate the injection rate. When a valve opening is modified, pressure changes in the entire pipe network and thereby changes flow rates in other wells. Therefore, desired valve openings must be determined for all injection wells. The pipe flow analysis allows estimation of the minimum pump power in addition to valve openings. Methods are developed to identify valve openings for multiple wells and the minimum pump power. The methodology developed in this work can contribute to precise operation of multiple injection wells.

• Journal of Aerospace System Engineering
• /
• v.7 no.2
• /
• pp.55-59
• /
• 2013

Before avionics equipment are installed in aircraft, several environmental tests such as temperature, vibration, lightning, fire etc. must be conducted. One of the environmental tests is to substantiate protection designs of lightning indirect effect. It can be showed through RTCA DO-160G, section22 "Lightning Induced Transient Susceptibility" test. An additional test of aircraft level is required as well after installation of avionics equipment.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2004.05a
• /
• pp.66-69
• /
• 2004

We have investigated the spectral characteristics of semiconductor lasers locked to the external light injected from a modulated laser. The numerical model for semiconductor lasers under the external optical injection is based on the Lang's equation and has been extended in order to take into account the simultaneous injection of the multiple sidebands of the current-modulated laser. In this paper, we have analyzed characteristics of semiconductor laser using optical injection locking

• Journal of the Korean Society of Laryngology, Phoniatrics and Logopedics
• /
• v.12 no.1
• /
• pp.5-10
• /
• 2001

Glottal incompetence is one of the causative condition of hoarseness. There have been various methods to improve the glottal conditions. Vocal fold augmentation by injection under direct visual control is a quick and simple operation. Various vocal fold augmentation procedures have developed in recent years. Phonosurgical vocal fold injection can be classified as superficial or deep, by the location of the injection. The choice of material fir vocal fold injection is critical and should be determined by the injection location, technique, and the pathologic condition. There are multiple approaches or methods for vocal f31d injection ; the most widely used are presented in detail in this article.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1999.03b
• /
• pp.213-217
• /
• 1999

An expert system is developed for rational and efficient design of multi-component injection molding which is a fairly new manufacturing technique to produce plastic parts by injecting two or more materials sequentially using multiple injection units in a single machine into a single rotary mold. The knowledge base used in the present design system is primarily composed of two parts ; knowledge from domain expert and knowledge from CAE analysis. The present expert system has hour main modules ; general design guidelines for injection molding specific guidelines for multi-component injection molding redesign guidelines from the result of the CAE analysis and finally troubleshooting for multi-component injection molding. To show the validity of the present design methodology two shop floor design problems were tested ; design and fabrication of timing belt cover and power window's assist knob by using multi-component injection molding.

• Transactions of Materials Processing
• /
• v.12 no.5
• /
• pp.465-472
• /
• 2003

Engineering design can be viewed as a decision making process, which involves the nonlinear tradeoffs task among the multiple conflicting attributes and considers the robustness of design. In order to obtain best engineering design, methodology for accurate assessment of his/her preference about the multiple attributes is required. Conventionally, intuitive procedures based on lottery questions are used to elicit the designer's preference structure: however, they can lead to inconsistent and inexact preference results due to the rank reversal problems derived from the designer's big cognitive burden. In this paper, alternatively, a design methodology based on multiattribute utility function through the pairwise comparison among alternatives is presented. The proposed procedure is applied to an actual injection mold design with the aid of the CAE simulation and the result is discussed.

• Journal of ILASS-Korea
• /
• v.17 no.2
• /
• pp.57-63
• /
• 2012

For reduction of CO, NOx and soot emission emitted by diesel diffusion combustion, the authors focused on injection actuator to improve fuel availability inside combustion chamber. In this study, it was investigated the internal dynamic characteristics of two-stage injection with diesel injectors with different driving type for the common rail direct injection by using the AMESim simulation code. The analysis parameter defined such as fuel pressure, injection hole's diameter and driven voltage. As the results, it was shown that the piezo-driven injector had a faster response and had better control capability than the solenoid-driven injector. It was found the piezo-driven injector can be utilized effectively as multiple injector than solenoid-driven injector.