• 한국전자통신학회논문지
• /
• 제17권1호
• /
• pp.59-70
• /
• 2022

본 논문에서는 쿼드로터의 모터 하나가 완전히 고장이 발생한 경우 쿼드로터의 위치 제어를 위한 능동 결함 허용 제어 방법을 제안한다. 소각의 가정 없이 라그랑지 방정식을 사용하여 쿼드로터의 동적 방정식을 구한다. 제안한 방법에서는 모터의 결함 검출을 위해 고장 검출 및 진단(FDD) 모듈과 고장 검출 및 분리(FDI) 모듈로 구성되는 고장 검출모듈을 설계한다. FDD 모듈에서는 구해진 동력학에 기반하여 쿼드로터의 상태를 관측하는 비선형 관측기를 설계한다. 관측된 쿼드로터의 상태들를 이용하여, 유수 신호를 설계하고 결함을 검출하기 위한 유수 신호의 적절한 문턱 값을 설정한다. 또한 설계된 추가 조건을 사용하여 결함 위치를 알아내기 위한 FDI 모듈을 설계한다. 모터의 결함을 검출한 후 쿼드로터가 원하는 경로로 비행하기 위해 다중 슬라이딩 표면 제어 기법에 기반한 결함 허용 제어기를 설계한다. 마지막으로, 모의실험을 통해 제안한 능동 결함 허용 제어 방법이 효용성을 검증한다.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제55권3호
• /
• pp.91-97
• /
• 2006

A major difficulty with the practical application of the multiple observer based IFDI schemes is the computational burden of the residual generation. In this paper, a new residual generator that employs function observers is proposed to reduce the computational burden, and the design methods of the IFDIS, equipped with the residual generator, are presented. The function observers employed in the residual generator can be considered as a dual of the unknown input (function) observer And it can be designed to estimate the measurement errors that are due to sensor faults. The error estimates are further processed to generate the residuals by which reliable fault detection/isolation result car be obtained. The proposed scheme is more useful, in real-time application, than any other multiple state observer based IFDISs. It can be effectively applied to fault tolerant control because the failure effects can be compensated by the use of the estimates of measurement errors. The proposed IFDI scheme is applied to an inverted pendulum control system for the IFDI of failed sensor and fault compensation.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 추계학술대회 논문집
• /
• pp.44-44
• /
• 2009

Fault detection is necessary for yield enhancement and cost reduction in semiconductor manufacturing. Sensory data acquired from the semiconductor processing tool is too large to analyze for the purpose of fault detection and classification(FDC). We studied the techniques of fault detection using statistical method. Multiple regression analysis smoothly detected faults and can be easy made a model. For real-time and fast computing time, the huge data was analyzed by each step. We also considered interaction and critical factors in tool parameters and process.

• 한국정밀공학회지
• /
• 제17권4호
• /
• pp.135-141
• /
• 2000

The major role of temperature sensors in thermal error compensation system of machine tools is improving machining accuracy by supplying reliable temperature data on the machine structure. This paper presents a new method for fault diagnosis of temperature sensors and recovery of faulted data to establish the reliability of thermal error compensation system. The detection of fault and its location is based on the correlation coefficients among temperature data from the sensors. The multiple linear regression model which is prepared using complete normal data is also used fur the recovery of faulted data. The effectiveness of this method was tested by comparing the computer simulation results and measured data in a CNC machining center.

• 정보처리학회논문지A
• /
• 제12A권5호
• /
• pp.421-426
• /
• 2005

대규모 병렬 연산에 있어서, 계산 노드 혹은 이들을 연결한 통신 네트워크의 장애는 연산 실패로 끝나며, 소중한 계산 시간이 낭비된다. 그러나 현재의 MPI 표준은 이에 대한 대안을 제시하지 않고 있다. 본 논문에서는, 비표준의 무정지형 MPI 라이브러리가 아닌 MPI 표준 함수들만을 사용하여, MPMD 방식의 비동기 연산을 도입한 응용 수준의 무정지형 선형 시스템의 해법을 제안한다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1994년도 추계학술대회 논문집
• /
• pp.790-795
• /
• 1994

This paper describes multiple fault diagnosis method in complex system with hierarchical structure. Complex system is divided into subsystem, item, component. For diagnosing this hierarchical complex system, it is necessary to implement special neural network. We introducd to Hierarchical Artificial Neural Network(HANN) for this purpose. HANN consists of four level neural network, first level for symptom classification, second level for item fault diagnosis, third level for component symptom classification,forth level for component fault diagnosis. Each network is multi layer perceptron with 7 inputs, 30 hidden node and 7 outputs trainined by backpropagation. UNIX IPC(Inter Process Communication) is used for implementing HANN with multitasking and message transfer between processes in SUN workstation. We tested HANN in reactor system.

• 전기학회논문지
• /
• 제67권12호
• /
• pp.1648-1656
• /
• 2018

The configuration of redundant inertial sensors are very important when considering navigation performance and fault detection and isolation (FDI) performance. By constructing a redundant sensor system using multiple inertial sensors, it is possible to improve the navigation performance and fault detection and isolation performance, which are highly related to the sensor configuration and allocation. In order to deploy multiple MEMS inertial measurement units effectively, a configuration and allocation methods considering navigation performance, fault detection and isolation performance, and lever arm effect in one plane are presented, and the performance is analyzed through simulation in this research. From the results, it is confirmed that the proposed configuration and allocation method can improve navigation, FDI, and lever arm effect rejection performances more effectively by more than 70%.

• 한국군사과학기술학회지
• /
• 제7권3호
• /
• pp.140-148
• /
• 2004

Fault detection and isolation(FDI) and reconfigurable flight control system provide better survivability even though actuator faults occur. In this study, a new fault detection and isolation algorithm is proposed using fuzzy logic. When the FDI system detects the actuator fault, the fuzzy logic investigates the state variables to find which actuator has fault. Proposed fuzzy detection algorithm detect not only a single fault but also multiple faults. After detecting the fault, the reconfigurable flight control system begins operating for compensating the effects of the fault. A numerical simulation using six degree-of-freedom nonlinear aircraft model is performed to verity the performance of the proposed fault detection and isolation scheme.

• Structural Engineering and Mechanics
• /
• 제86권5호
• /
• pp.589-605
• /
• 2023

This paper investigates the ductility demands of steel frames equipped with self-centring fuses under near-fault earthquake motions considering multiple yielding stages. The study is commenced by verifying a trilinear self-centring hysteretic model accounting for multiple yielding stages of steel frames equipped with self-centring fuses. Then, the seismic response of single-degree-of-freedom (SDOF) systems following the validated trilinear self-centring hysteretic law is examined by a parametric study using a near-fault earthquake ground motion database composed of 200 earthquake records as input excitations. Based on a statistical investigation of more than fifty-two (52) million inelastic spectral analyses, the effect of the post-yield stiffness ratios, energy dissipation coefficient and yielding displacement ratio on the mean ductility demand of the system is examined in detail. The analysis results indicate that the increase of post-yield stiffness ratios, energy dissipation coefficient and yielding displacement ratio reduces the ductility demands of the self-centring oscillators responding in multiple yielding stages. A set of empirical expressions for quantifying the ductility demands of trilinear self-centring hysteretic oscillators are developed using nonlinear regression analysis of the analysis result database. The proposed regression model may offer a practical tool for designers to estimate the ductility demand of a low-to-medium rise self-centring steel frame equipped with self-centring fuses progressing in the ultimate stage under near-fault earthquake motions in design and evaluation.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 하계종합학술대회 논문집(3)
• /
• pp.75-78
• /
• 2002

In this paper, we present the design and implementation of a Fault Tolerant VOD system. The system uses the double striping policy that a original file is sequentially striped to multiple streaming server with constant data block size and the data block of one streaming server is re-striped to the other streaming server. When a fault occurs in one streaming server, automatically the other streaming server will service.