• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2010년 춘계학술대회논문집
• /
• pp.320-325
• /
• 2010

A multiphase CFD analysis is performed to investigate the effect of near-wall grid for simulating a subcooled boiling flow in vertical tube. The multiphase flow model used in this CFD analysis is the two-fluid model in which liquid(water) and vapor(steam) are considered as continuous and dispersed fluids, respectively. A wall boiling model is also used to simulate the subcooled boiling heat transfer at the heated wall boundary. The diameter and heated length of tube are 0.0154 m and 2 m, respectively. The system pressure in tube is 4.5 MPa and the inlet subcooling is 60 K. The near-wall grid size in the non-dimensional wall unit ($y_{w}^{+}$) was examined from 64 to 172 at the outlet boundary. The CFD calculations predicted the void distributions as well as the liquid and wall temperatures in tube. The predicted axial variations of the void fraction and the wall temperature are compared with the measured ones. The CFD prediction of the wall temperature is shown to slightly depend on the near-wall grid size but the axial void prediction has somewhat large dependency. The CFD prediction was found to show a better agreement with the measured one for the large near-wall grid, e.g., $y_{w}^{+}$ > 100.

• 한국유체기계학회 논문집
• /
• 제20권2호
• /
• pp.75-81
• /
• 2017

This paper presents a numerical investigation on the local hydraulic cavitation phenomena of water resulting from the rotor with high rotational speed in the hydraulic cavitation heat generator. The numerical simulation utilizes the standard k-epsilon turbulence model, the mixture multiphase model and the Schnerr-Sauer cavitation model to simulate the complex cavitation phenomena in the generator. For exploring the efficient shape of the dimples on the rotor to causing cavitation phenomena artificially, the pressure distributions and the volume fractions of the vapor on the rotor are investigated respectively about different shapes of the rotor in the generator. The optimum shape of the dimple to causing cavitation phenomena in the selected shapes is obtained by the means of the numerical simulation.

• 청정기술
• /
• 제25권3호
• /
• pp.206-222
• /
• 2019

최근에는 다양한 다상오염물 거동 흐름 모델들이 개발되었고 일부는 상용화되기도 하였으나, 대부분이 압력기저접근방식을 갖고 개발된 프로그램들이므로 다양한 수치적 어려움을 내재하고 있다. 이러한 수치적 어려움을 극복하기 위해서는 분율흐름접근방식을 따르는 기존 다상흐름거동 수치모델로 개발된 MultiPhaSe flow (MPS) 모델에 계면활성제에 의한 용해 현상을 모사할 수 있는 오염물 거동 모듈을 결합해서 MultiPhaSe flow and TranSport (MPSTS) 프로그램을 본 연구에서 개발하였다. 개발된 모델은 Clement의 해석 해를 사용하여 검증하였다. 여기서 MPSTS프로그램은 입자추적법과 결합한 라그랑지안-율러리안 기법을 이용해서 상간물질전달 효과와 다상내 오염물 거동 기능을 결합한 계면활성제 활용 복원과정을 모사할 수 있는 프로그램이다. 본 연구에서는 개발된 모델을 이용해서 소수성 액체(non aqueous phase liquid, NAPL)로 오염된 지역의 계면활성제에 의한 오염 정화 시 층상구조를 가지는 수리지질학적 불 균질성이 복원효율에 미치는 영향을 수치 모의 하였다. 수치모의 결과, 하부 층의 수리전도도가 상부 층의 수리전도도보다 10배, 20배, 50배로 큰 경우에 대해서 하부에서 물속에 용해된 디젤의 농도가 높게 나타난다. 왜냐하면 계면활성제가 하부 층을 따라서 좀 더 빨리 움직여서 하부 층에서 잔류 소수성 액체를 좀 더 많이 용해시켰기 때문이다.

• 한국가시화정보학회지
• /
• 제18권3호
• /
• pp.35-41
• /
• 2020

We conduct numerical simulations of the interaction of a deformable structure with two-phase compressible flow. The finite volume method (FVM) is used to simulate fluid phenomena including a shock wave, a gas bubble, and the deformation of free surface. The deformation of a floating structure is computed with the finite element method (FEM). The compressible two-phase volume of fluid (VOF) method is used for the generation and development of a cavitation bubble, and the immersed boundary method (IBM) is used to impose the effect of the structure on the fluid domain. The result of the simulation shows the generation of a shock wave, and the expansion of the bubble. Also, the deformation of the structure due to the hydrodynamic loading by the explosion is identified.

• 한국해양공학회지
• /
• 제35권2호
• /
• pp.121-130
• /
• 2021

In this study, a computational fluid dynamics (CFD) simulation based on an Eulerian-Eulerian approach was used to evaluate the mixing performance of a mud agitator through the distribution of bulk particles. Firstly, the commercial CFD software Star-CCM+ was verified by performing numerical simulations of single-phase water mixing problems in an agitator with various turbulence models, and the simulation results were compared with an experiment. The standard model was selected as an appropriate turbulence model, and a grid convergence test was performed. Then, a simulation of the liquid-solid multi-phase mixing in an agitator was simulated with different multi-phase interaction models, and lift and drag models were selected. In the case of the lift model, the results were not significantly affected, but Syamlal and O'Brien's drag model showed more reasonable results with respect to the experiment. Finally, with the properly determined simulation conditions, a multi-phase flow simulation of a mud agitator was performed to predict the mixing time and spatial distribution of solid particles. The applicability of the CFD multi-phase simulation for the practical design of a mud agitator was confirmed.

• Structural Engineering and Mechanics
• /
• 제66권4호
• /
• pp.505-513
• /
• 2018

Steam flooding is widely used in heavy oil reservoir with coupling effects among the formation temperature change, fluid flow and solid deformation. The effective stress, porosity and permeability in this process can be affected by the multi-physical coupling of thermal, hydraulic and mechanical processes (THM), resulting in a complex interaction of geomechanical effects and multiphase flow in the porous media. Quantification of the state of deformation and stress in the reservoir is therefore essential for the correct prediction of reservoir efficiency and productivity. This paper presents a coupled fluid flow, thermal and geomechanical model employing a program (MATLAB interface code), which was developed to couple conventional reservoir (ECLIPSE) and geomechanical (ABAQUS) simulators for coupled THM processes in multiphase reservoir modeling. In each simulation cycle, time dependent reservoir pressure and temperature fields obtained from three dimensional compositional reservoir models were transferred into finite element reservoir geomechanical models in ABAQUS as multi-phase flow in deforming reservoirs cannot be performed within ABAQUS and new porosity and permeability are obtained using volumetric strains for the next analysis step. Finally, the proposed approach is illustrated on a complex coupled problem related to steam flooding in an oil reservoir. The reservoir coupled study showed that permeability and porosity increase during the injection scenario and increasing rate around injection wells exceed those of other similar comparable cases. Also, during injection, the uplift occurred very fast just above the injection wells resulting in plastic deformation.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2005년도 학술발표회 논문집
• /
• pp.245-249
• /
• 2005

The numerical simulation of a two-phase flow In a discrete fracture network model is presented in this paper, The purpose of this work is to consider density-driven flows induced by the density difference between hot autochthonous heavy brines and injected cold water. Mechanical consequences of high pressure waves on the fracture permeability and heat exchanges between fluids and rock matrix are neglected in this study. The finite volume method is employed to discretize spatially and the system is solved by using an IMPES(Implicit Pressure-Explicit Saturation) scheme. In order to solve the strong non-linearity of the system, the Newton-Raphson algorithm is used. The well-known Buckeley-Leverett problem is adapted to validate results calculated from the model and a relatively good agreement is obtained.

• 한국해양환경ㆍ에너지학회지
• /
• 제19권2호
• /
• pp.111-119
• /
• 2016

기체-액체 이상유동의 거동 시뮬레이션을 위해 Lattice Boltzmann방법(LBM)을 이용하였다. 기체-액체사이의 경계면에서 상호포텐셜 모델인 Shen-Chan방식과 Carnahan-Starling 상태방정식을 도입하였다. 또한 외력항의 처리는 Exact Difference Method를 사용하였다. 개발된 코드를 통하여 상태방정식 특성파악, 기체-액체의 상분리, 표면장력 및 기체 액체 경계면 거동 특성, Homogeneous와 Heterogeneous 캐비테이션, 기포 붕괴등의 시뮬레이션을 수행하였다.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2008년도 춘계학술대회논문집
• /
• pp.436-439
• /
• 2008

Computer simulation of multiphase flows has grown dramatically in the last two decades. In this work, we have studied the flow characteristics of immiscible two fluids in a 2-D micro channel driven by pressure gradient using multi-phase lattice Boltzmann method suggested by Shan and Chen(1993) considering the fluid-surface interaction. we tried to examine the effects of parameters related to the two phase flow characteristics and pressure drop in the micro channel like contact angle and channel configuration by changing their value. The results of current study could show the lattice Boltzmann method can simulate the behaviors of two phase flow in the region of micro fluidics well.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2004년도 제22회 춘계학술대회논문집
• /
• pp.341-346
• /
• 2004

Motion of a bubble inside narrow tube is numerically studied. The numerical code assumes axi-symmetric incompressible flow field. The surface of the bubble is captured by VOF (Volume Of Fluid) method, and it is advected by MARS (Multiphase Advection and Reconstruction Scheme). Air bubble inside water is first studied, and it was found that a strong vortex, which is induced by the pressure difference caused by the surface tension, is formed at the rear part of the bubble. Then flow parameters are parametrically varied to understand the correlation between the bubble shape, the bubble velocity, and the flow parameters. The parametric study revealed that the aspect ratio of the bubble mainly depends on We number, and the oscillation of the bubble speeds is dependent on Re number.