• ETRI Journal
• /
• v.38 no.1
• /
• pp.81-89
• /
• 2016

In this paper, a beam ID preamble (BIDP) technique, where a beam ID is transmitted in the physical layer, is proposed for efficient beam training in millimeter-wave cellular communication systems. To facilitate beam ID detection in a multicell environment with multiple beams, a BIDP is designed such that a beam ID is mapped onto a Zadoff-Chu sequence in association with its cell ID. By analyzing the correlation property of the BIDP, it is shown that multiple beams can be transmitted simultaneously with the proposed technique with minimal interbeam interference in a multicell environment, where beams have different time delays due to propagation delay or multipath channel delay. Through simulation with a spatial channel model, it is shown that the best beam pairs can be found with a significantly reduced processing time of beam training in the proposed technique.

• Proceedings of the IEEK Conference
• /
• 2007.07a
• /
• pp.343-344
• /
• 2007

In this paper, we study the signed-DLMS adaptive algorithm of wireless repeater for solving shadow region due to propagation between base station and mobile station. The the signed-DLMS algorithm reduces interference signals from multipath and solves the oscillation problem of repeater by estimation and cancellation. To efficiently reject interference signal, the signed-DLMS adaptive algorithm is applied. The computational complexities of the signed-DLMS are reduced verse standard LMS algorithm. Wireless ICS repeater based on signed-DLMS reduces the cost and is able to increase channel capacities.

• Proceedings of the IEEK Conference
• /
• 2007.07a
• /
• pp.177-178
• /
• 2007

WiBro system provides reliable broadband communication services for mobile and portable subcribers. It allows interference-free reception under the conditions of multipath propagation and transmission errors. Thus, powerful channel-error correction ability Is required. CC/CTC Decoder which Is mandatory for WiBro system needs lots of computations for real-time operation. So, it is desired to design a CC/CTC Decoder having highly optimized hardware scheme for low latency operation under high data rates. This paper proposes an efficient CC/CTC Decoder structure for high data rate WiBro system. Particularly, the proposed CTC Decoder architecture reduces decoding delay by applying pipelining and multiple decoding blocks. Simulation results show that reduction of about 80% of processing time is enabled with the proposed CC/CTC Decoder despite of increase in are.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.8 no.5
• /
• pp.114-120
• /
• 2009

In outdoor visible light communication channels and LED road illumination communications for the intelligent transport systems (ITS), inter symbol interference (ISI) due to multipath propagation prevents high data rate transmission. Indoor wireless optical communication systems utilizing white LED lights and on the road illumination have been studying about it. Generally, plural lights are installed in room and considered to the traffic information system using existing LED traffic lights. Therefore, their optical path difference must be considered. In this paper, the influence of an optical path difference has been investigated and two approaches against this problem are introduced. One uses on-off keying, return-to-zero (OOK-RZ) coding and the other uses optical orthogonal frequency division multiplexing(OFDM).

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2004.05b
• /
• pp.486-488
• /
• 2004

Rayleigh signal fading phenomena due to multipath propagation in wireless communication can be simulated using the sum-of-sinusoids channel model. Jakes' fading model is very simple simulator based on the sum-of-sinusoids and has been widely used. However, It has some short-comings. Its time correlation properties based on the simulated waveform do not correspond to the statistical ones. In this paper, the difference between statistical and time properties of Jakes' fading channel model is examined and new simulator is proposed.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.58-58
• /
• 2001

This paper shows a practical approach that is robust to the errors causing path-delay in mobile wireless location, and analyzes its performance by comparing with other methods. NLOS(non-line-of-sight) error and multipath are two big sources of positioning error in wireless location. Contrary to GPS(global positioning system), they result from the terrestrial propagation of a signal. Especially, since LOS(line-of-sight) path between a transceiver and a receiver is blocked by intermediate buildings and topography, NLOS causes a signal to be reflected and diffracted. This path-delay error is very localized, and so, it is not easy to be estimated and mitigated. To treat such localized error, therefore ...

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2020.07a
• /
• pp.717-720
• /
• 2020

An indoor localization system that uses Wi-Fi RSSI signals for localization gives accurate user position results. The conventional Wi-Fi RSSI signal based localization system uses raw RSSI signals from access points (APs) to estimate the user position. However, the RSSI values of a particular location are usually not stable due to the signal propagation in the indoor environments. To reduce the RSSI signal fluctuations, shadow fading, multipath effects and the blockage of Wi-Fi RSSI signals, we propose a Wi-Fi localization system that utilizes the advantages of Wi-Fi RSSI heat maps. The proposed localization system uses a regression model with deep convolutional neural networks (DCNNs) and gives accurate user position results for indoor localization. The experiment results demonstrate the superior performance of the proposed localization system for indoor localization.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.7A
• /
• pp.762-769
• /
• 2007

Adaptive MIMO-OFDM (Orthogonal Frequency Division Multiplexing) system adaptively changes modulation scheme depending on feedback channel state information (CSI). The CSI feedback channel which is the reverse link channel has multiple symbol delays including propagation delay, processing delay, frame delay, etc. The unreliable CSI due to feedback delay degrades adaptive modulation system performance. This paper compares the MSE and data capacity with respect to delay and channel signal to noise ratio for the two multi-step channel prediction schemes, CTSBP and BTSBP, such that robust adaptive SISO-OFDM/MIMO-OFDM is designed over severe mobile multipath channel conditions. This paper presents an interpolation method to reduce feedback overhead for adaptive MIMO-OFDM and shows MSE with respect to interpolation interval.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.1654-1659
• /
• 2003

In this paper, the performance evaluation of the JADE-MUSIC estimation based on the indoor channel is presented. By means of the JADE-MUSIC algorithm, DOA and time delay can be obtained simultaneously. In the JADE-MUSIC method, the channel impulse response is first estimated from the received samples and then this impulse response is employed to estimate DOAs and time delays of multipath waves. Moreover, according to the JADE-MUSIC characteristics, it can work in cases when the number of impinging waves is more than the number of antenna elements, unlike the traditional parametric subspace-based method, such a case is not true. Therefore, we employ the JADE-MUSIC algorithm applying for the real indoor environment where is rich of the multipath propagation waves and can imply that the number of waves is very possibly higher than that of the array element. The experiment is carried out in our laboratory considered to be the real indoor environment. The performance of the JADE-MUSIC algorithm is evaluated in terms of the comparison between the simulation and experiment results by using the simulated channel model and the real indoor channel model, respectively. It is clear that the joint angle and delay estimation using the simulated channel model are in good agreement with the estimation using the real indoor channel model. Therefore, we can say that the JADE-MUSIC algorithm accomplishes the high performance to jointly estimate the angle and delay of the arriving signal for the indoor environment.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.14 no.5
• /
• pp.30-37
• /
• 2015

The study for enhancing the data transmission rate of the next generation wireless communication system using MIMO system operating in the frequency selective fading environment is currently actively conducted. Mixed signal from each transmitted antennas are received at antennas. The training signal with orthogonal property is needed to separate the mixed signal and enable to estimate channel and time synchronization. In this paper we introduce several training sequences used in MIMO communication system and proposed the modified WeCAN sequence with good auto-correlation property in interested area. We compared auto-correlation property of each sequence via simulation and compared the performance of sequences in doppler shift and multipath fading channel.