• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.6A
• /
• pp.640-650
• /
• 2004

Channel estimation schemes are proposed for Multiple Input-Multiple output Orthogonal Frequency Division Multiplexing(MIMO-OFDM) systems based on the physical layer specification of the IEEE 802.1 la. By combining the space-time block coding(STBC)/ space-frequency block coding(SFBC) techniques with the transform domain interpolation, the proposed algorithms achieve more accurate channel coefficients for the MIMO channels such that improve the BER performance. The performance improvements of the proposed algorithms are evaluated by simulations under the various multipath fading channel environments and various transmission rates.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.6A
• /
• pp.660-666
• /
• 2004

Transmitted data may be compensated by using estimated channel values that are obtained with pilot symbols in OFDM-CDMA systems. Generally, a USE (Minimum Mean-Squared Error) estimator using correlations between pilot symbols gives good results, but its structure is so complicated. Starting with a modification of PA (Pilot-Aided) algorithm using pilot symbols and PADD (Pilot-Aided Decision-Directed) algorithm using both pilot and data symbols, a new channel estimation algorithm with more simpler structure is proposed. The performance of this algorithm is evaluated with varying mobile speed in a Ralyleigh multipath fading environment through computer simulations. The simulation results show that the proposed channel estimation algorithm outperforms a conventional PA algorithm.

• Journal of Digital Contents Society
• /
• v.5 no.2
• /
• pp.121-127
• /
• 2004

In this paper, we have analyzed the error performance of OFDM (Orthogonal Frequency Division Multiplexing 16 QAM (Quadrature Amplitude Modulation) Signal in a multipath fading environment modeled as frequency selective Rician fading. We have used a three-path model as frequency selective Rician fading used Rician parameter K. A BCH channel coding is used in order to improve the performance. From the result of this analysis, we have known the improvement of the error performance improvement and the error correcting capability by the BCH channel coding. From the results, the error performance, about $10^{-6},$ required in wireless multimedia communications can not be achieved by using only the BCH channel coding technique so that it should be adopted a new technique together.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.28 no.11
• /
• pp.920-923
• /
• 2017

In this paper, we design the internal parameters of the SIMO channel sounder suitable for the measurement of the high-speed travel environment channel, and measure the characteristics of the wide-band channel by applying the proposed measurement method to the Yeoju Smart Highway piloted at 5.89 GHz C-ITS. Based on the design of the receiving array structure suitable for the real environment, the linear slope compensation method for the Doppler phase shift is applied to provide a reliable result on the Doppler effect due to the incoming angle information and the surrounding environment in the multipath environment.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.7 no.1
• /
• pp.33-38
• /
• 2012

As underwater channel is very complex and time-varying, don't supports good-quality for communication service. In this paper, a multi-carrier CDMA(MC-CDMA) system for the reliability and robust service in the underwater acoustic channel is proposed and analyzed for its performance. Applied variable rate algorithm to the proposed system gets a channel state information from relationship between SINR and user data-rate. Using channel state information make spectrum usage more efficient and overall system performance improved. In this paper, the performance of proposed system analyzed by simulation. And Pseudo-Random spread codes used in the system are discussed.

• Journal of Satellite, Information and Communications
• /
• v.12 no.2
• /
• pp.104-111
• /
• 2017

Pre-Rake CDMA system using multiple transmit antenna provides a good system performance without equipping a complicated RAKE combiner at the mobile receiver. However, the performance of the Pre-Rake systems are significantly affected by channel estimation error so that the effect of the channel estimation error should be considered and analyzed for evaluating the system performance. In this paper, MISO(Multi-Input Multi-output) Pre-Rake CDMA system with channel estimation error is analyzed by numerical analysis and the results are compared with that of the computer simulation. From the numerical results, it is found that the performance of the Pre-Rake system is more affected by the phase error than the amplitude error.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.2C
• /
• pp.192-199
• /
• 2008

In ultra-wideband (UWB) systems, conventionally, the synchronization is to align time phases of a locally generated template and any of multipath components to within an allowable range. However, the synchronization with a low-power multipath component could incur significant performance degradation in receiver operation (e.g., detection) after the synchronization. On the other hand, the synchronization with a high-power multipath component can improve the performance in receiver operation after the synchronization. Generally, the first one among multipath components has the largest power. Thus, the synchronization with the first path component can make better performance than that with low-power component in receiver operation after the synchronization, Based on which, we first propose an optimal decision rule based on a maximum likelihood (ML) approach, and then, develope a simpler suboptimal decision rule for selecting the first path component. Simulation results show that the system has good demodulation performance, which uses new synchronization definition and the proposed decision rules have better performance than that of the conventional decision rule in UWB multipath channels. Between macroblocks in the previous and the current frame. On video samples with high motion and scene change cases, experimental results show that (1) the proposed algorithm adapts the encoded bitstream to limited channel capacity, while existing algorithms abruptly excess the limit bit rate; (2) the proposed algorithm improves picture quality with $0.4{\sim}0.9$dB in average.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.5A
• /
• pp.475-483
• /
• 2006

If channel coefficients errors exist in MIMO-OFDM systems, the performance degradation of systems will occurs. In order to improve the performance of MIMO-OFDM systems, the technique of obtaining accurate channel estimation in multipath fading channel is necessary. In this paper, we introduce and propose new channel estimation-modified ICA algorithm. Simulation results shows from BER and SER curves which compare the proposed algorithm under time-varying Rayleigh fading with perfect known channel. The result of channel estimation by the proposed algorithm in this simulation, it shows that PDF(amplitude of channel) are close to the case with perfect known channel at the receiver with respect to uncoded QPSK/16-QAM/64-QAM modulation. Also, we can see that BER and SER curves are very close to the case with perfect known channel. Therefore, we see that the proposed algorithm have a good performance in MIMO-OFDM systems.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.42 no.9 s.339
• /
• pp.19-28
• /
• 2005

We establish a statistical model for the ultra-wide bandwidth (UMB) indoor channel based on over 2000 frequency response measurements campaign in a Practical apartment. The approach is based on the investigation of the statistical properties of the multipath profiles measured in different place with different rooms. Based on the experimental results, a characterization of the propagation channel from theoretic view point is described. Also we describe a method for measurement of the channel impulse response and channel transfer function. Using the measured data, the authors compares channel impulse responses obtained from time-domain and channel transfer functions obtained from frequency-domain with statistical path loss model. The bandwidth of the signal used in this experiment is from 10MHz to 8.01 GHz. The time-domain results such as maximum excess delay, men excess delay and ms delay spread are presented. As well as, omni-directional biconical antenna were used for transmitter and receiver In addition, measurements presented here support m channel model including the antenna characteristics.

• Proceedings of the IEEK Conference
• /
• 2000.06a
• /
• pp.25-28
• /
• 2000

In this paper, we assume various number of multipaths in one chip duration according to spreading bandwidth. And we take into account of the effects of autocorrelation and relative phases among multipath components within one chip duration, and analyze fading effects. We derive the average error probability for different number of users. Then, we compare the performance of W-CDMA systems with different bandwidths. From the simulation results for different band-widths, wideband CDMA systems show better performance than narrowband CDMA systems in vehicular and pedestrian environments.