• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.29A no.11
• /
• pp.57-61
• /
• 1992

In this paper, the shielding characteristics of a cylindrical multilayered dielectric are analyzed. In order to evaluate shielding effects, we consider the case that plane waves are incident upon an infinitely long cylindrical multilayered dielectric which surrounds a conductor core. For perfect and lossy dielectric distributions, total induced currents at the conductor surface are computed. It was found from those results that electromagnetic characteristics of the multilayered dielectric are largely dependent on dielectric distribution.

• Interaction and multiscale mechanics
• /
• v.5 no.4
• /
• pp.369-383
• /
• 2012

In this paper, soil-structure interaction analysis has been presented for beams resting on multilayered geosynthetic-reinforced granular fill-soft soil system. The soft soil and geosynthetic reinforcements are idealized as nonlinear springs and elastic membranes, respectively. The governing differential equations are solved by finite difference technique and the results are presented in non-dimensional form. It is observed from the study that use of geosynthetic reinforcement is not very effective for maximum settlement reduction in case of very rigid beam. Similarly the reinforcements are not effective for shear force reduction if the granular fill has very high shear modulus value. However, multilayered reinforced system is very effective for bending moment and differential settlement reduction.

• Proceedings of the KIEE Conference
• /
• 2004.11a
• /
• pp.180-182
• /
• 2004

Polycrystalline $BaTiO_3/SrTiO_3$ powder was prepared by sol-gel process and the multilayered thick films were prepared on the $Al_2O_3$ substrates by screen printing method. The films were sintered at $1400^{\circ}C$ for 2 hours in the air. The structural and dielectric properties were investigated, The X-ray diffraction (XRD) patterns indicate that the BST phase and porocity were formed in the interface of $BaTiO_3/SrTiO_3$ multilayered thick films. The dielectric constant and the dielectric loss of the BT/ST/BT/ST multilayered thick films were about 247 and 0.84% at 1MHz.

• Composites Research
• /
• v.13 no.6
• /
• pp.23-29
• /
• 2000

The internal residual stresses within the multilayered structure with sharp interface induced by the difference in thermal expansion coefficient between the materials of adjacent layers often provide the source of failure such as delamination of interfaces etc. Recent development of the multilayered structure with functionally graded interface would be the solution to prevent this kind of failure. However a systematic thermo-mechanical analysis is needed for the customized structural design of multilayered structure. In this study, theoretical model for the thermo-mechanical analysis is developed for multilayered structures of the $Al-SiC_p$ functionally graded composite for electronic packaging. The evolution of curvature and internal stresses in response to temperature variations is presented for the different combinations of geometry. The resultant analytical solutions are used for the optimal design of the multilayered structures with functionally graded interface as well as with sharp interface.

• ETRI Journal
• /
• v.39 no.6
• /
• pp.866-873
• /
• 2017

We propose a multilayered-substrate-based power semiconductor discrete device package for a low switching loss and high heat dissipation. To verify the proposed package, cost-effective, low-temperature co-fired ceramic, multilayered substrates are used. A bare die is attached to an embedded cavity of the multilayered substrate. Because the height of the pad on the top plane of the die and the signal line on the substrate are the same, the length of the bond wires can be shortened. A large number of thermal vias with a high thermal conductivity are embedded in the multilayered substrate to increase the heat dissipation rate of the package. The packaged silicon carbide Schottky barrier diode satisfies the reliability testing of a high-temperature storage life and temperature humidity bias. At $175^{\circ}C$, the forward current is 7 A at a forward voltage of 1.13 V, and the reverse leakage current is below 100 lA up to a reverse voltage of 980 V. The measured maximum reverse current ($I_{RM}$), reverse recovery time ($T_{rr}$), and reverse recovery charge ($Q_{rr}$) are 2.4 A, 16.6 ns, and 19.92 nC, respectively, at a reverse voltage of 300 V and di/dt equal to $300A/{\mu}s$.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.859-864
• /
• 2003

This paper presents a design for the novel suspension mechanism of a two-wheeled mobile robot having two casters which is used for indoor environment. Although the indoor environment is less rough than the outdoor one, the fixed caster mechanism has some problems such as causing the robot to be immovable because robot's driving wheels do not have contact with the ground. Therefore, we tried installing a spring-damper suspension mechanism to keep driving capability and to remove pitching phenomenon. However, this suspension mechanism also has the problem, which the robot body inclined by disturbances does not return to the initial position. To deal with above problems and to accomplish desired performances, we designed the Multilayered Suspension Mechanism, which has springs and dampers working partially according to the inclined angle and angular velocity of robot body concerned with pitching. To analyze design, the equations of motion describing their dynamics were developed. Using the equations, simulation results show the improved performance. We confirm the usefulness of the Multilayered Suspension Mechanism by construction and test of a actual prototype.

• The Journal of the Acoustical Society of Korea
• /
• v.9 no.2
• /
• pp.5-13
• /
• 1990

In this paper, 50MHz reflection ultrasonic microscope system with small aperture acoustic lens has been constructed in order to study the defects which lay deep in thick specimens, and acoustic images of multilayered media have been analyzed. Output characteristics of this system for multilayered media have been influenced by acoustic attenuation, aberration in specimen, type of lens and the properties of a defect, and it has been used for image processing of the multilayered I.C. and the bonding layer. In experimental results, it has been shown that small aperture ultrasonic microscope system was powerful tool for inspection of thick specimens such as electronic device, bonding layer, quality of ceramic materials.

• Archives of Plastic Surgery
• /
• v.32 no.4
• /
• pp.516-520
• /
• 2005

Multilayered cartilage graft has been clinically used at tip plasty, total ear reconstruction, and cleft lip nasal deformities. Perichondrial flap or a free perichondrium has been also commonly used for induction of neocartilage. However, the influence of perichondrium on multilayered cartilage graft to strength and growth rate is still unknown. The purpose of this study was to compare the strength and growth rate of different multilayered cartilage graft and to present the most ideal model of multilayered cartilage graft. Twenty New-zealand white rabbit were used. Triple layers of cartilage grafts with various perichondrium were inserted into six separate pockets in paravertebral region of rabbits. The grafts were grossly and microscopically observed on 8 and 16 weeks after grafting. On gross observation, the grafts showed marked enlargement of three layers of cartilage grafts with perichondrium compare with three layers of cartilage grafts without perichondrium In histologic examination, the number of PCNA-labelled cells were significantly high on three layers of cartilage grafts with perichondrium. In conclusion, this study suggested that triple-layer graft of cartilage grafts with perichondrium on the outside of triple-layer graft has strength and an effect on chondrogenetic induction by the perichondrium.

• Carbon letters
• /
• v.7 no.3
• /
• pp.180-187
• /
• 2006

The treatment of piggery wastes was carried out at pilot scale using a multilayered metal-activated carbon system followed by carbon bed filtration. The physicochemical properties were obtained from treated samples with aqueous solutions containing metallic ions such as $Ag^+$, $Cu^{2+}$, $Na^+$, $K^+$ and $Mn^{2+}$, which main obsevations are subjected to inspect surface properties, color removal properties by Uv/Vis and EDX. Multilayered metal-activated carbons were contacted with waste water to investigation of the simultaneous catalytic effect for the COD, BOD, T-N and T-P removal. The removal results for the piggery waste using multilayered metal-activated carbon bed was achieved the satisfactory removal performance under permitted values of Ministry of Environment of Korea. The high efficiency of the multilayered metal-activated carbon bed was determined by the performance of this material for trapping, catalytic effect and adsorption of organic solid particles.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.39 no.4
• /
• pp.53-60
• /
• 2007

LbL multilayering technology introduced by Decher is a nano technique that a substrate surface is layered by the successive deposition of polyelectrolytes with positive and negative charge. We investigated the electrochemical properties of LbL multilayered pulp fibers with poly-DADMAC and PSS. Three types of pulp-Hw-BKP, BCTMP and KOCC- were treated with polyelectrolytes. Zeta potentials of multilayered fibers ranged from +30 mV to +40 mV, depending on the intial zeta potential of pulp fibers and fines content. All kinds of pulp which were examined in this study, however, showed a similar zeta potential of -35 mV after layering with PSS. To obtain pulp fiber with a uniform and stable zeta potential, BCTMP and KOCC pulp fibers should be multilayered above 5 times. The addition level of polyelectrolytes had little influence on the zeta potential of pulp fibers.