• The Journal of the Korea institute of electronic communication sciences
• /
• v.3 no.2
• /
• pp.106-111
• /
• 2008

At the ubiquitous computing, Mobile RFID, which the convergence RFID and mobile device, researches are core method and infra to service B2B, B2C, and B2B2C service domain. We propose the functions of middleware to develop the mobile RFID device. It consists of multi-code integrated recognition module, the reader control module, the module code interpretation, and Dispatcher module. These functions can recognize the tag of EPC/ISO and mCode type. We describe the zone file of local ODS and the implemented module to read the 13.56MHz tag.

• Journal of Mechanical Science and Technology
• /
• v.18 no.6
• /
• pp.972-978
• /
• 2004

Forward slip is an important parameter often used in rolling-speed control models for tandem hot strip rolling mills. In a hot strip mill, on-line measurement of strip speed is inherently very difficult. Therefore, for the set-up of the finishing mill, a forward slip model is used to calculate the strip speed from roll circumferential velocity at each mill stand. Due to its complexity, most previous researches have used semi-empirical methods in determining values for the forward slip. Although these investigations may be useful in process design and control, they do not have a theoretical basis. In the present study, a better forward slip model has been developed, which provides for a better set-up and more precise control of the mill. Factors such as neutral point, friction coefficient, width spread, shape of deformation zone in the roll bite are incorporated into the model. Implementation of the new forward slip model for the control of a 7-stand hot strip tandem rolling mill shows significant improvement in roll speed set-up accuracy.

• Journal of the Korean Society for Precision Engineering
• /
• v.29 no.10
• /
• pp.1078-1088
• /
• 2012

In this paper, we present research experimental results about the different thickness T-joint welding of the high power continuous wave(CW) Nd:YAG laser for the secondary battery of a vehicle. Although the conventional method used for the secondary battery is a argon TIG welding, we utilize a laser welding to improve Tungsten Inert Gas(TIG) welding's weakness. The laser, which has a couple of advantage such as aspect ratio, low Heat Affected Zone(HAZ), good welding quality and fast productivity utilized in this work is a CW Nd:YAG laser. In order to observe laser welding sections, we used a optical microscope. Through the analysis of the metallographic, hardness, aspect ratio, and heat input, we obtained the desired data in condition of 1800 W laser beam power and 1.8 m/min and 2.0 m/min laser beam travel speeds. In order to compare electric resistances of the argon TIG welding and laser welding, we made an actual battery and the electric resistance of the laser welding is reduced by 40~45% comparing with the argon TIG welding.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.62 no.3
• /
• pp.63-69
• /
• 2020

Recently, the Yedang reservoir needs reflecting the demands of the public and administration, including change of reservoir status and paradigm shift of users, as well as planning programs to activate the area as a special health zone for tourism, leisure, recreation and experience at the local government level. Previous Optimum Equipment model (OEM) preferentially considers the creation of waterfront. This study shows the operation model for readjustment of water supply facilities according to the limit of the level of the beneficiaries. Results show the renovation cycle of Yedang tourist resort and the suspension bridge through developed model simulation. In addition to securing quantity for the supply of agricultural water and the function of water protection, the multi-function of the agricultural reservoir shall be re-evaluated to enhance the diverse availability of the agricultural reservoir. The county office should also boost various availability at various levels to revitalize the local economy, such as producing pleasant and safe places and offering safe food for people.

• The Journal of Korea Robotics Society
• /
• v.8 no.3
• /
• pp.186-196
• /
• 2013

Since its introduction (e.g., [4, 6]), virtual coupling technique has been de facto way to connect a haptic device with a virtual proxy for haptic rendering and control. However, because of the single dependence on spring-damper feedback action, this virtual coupling suffers from the degraded transparency particularly during contact tasks when large device/proxy-forces are involved. In this paper, we propose a novel virtual coupling technique, which, by utilizing passive decomposition, reduces device-proxy position deviation even during the contact tasks while also scaling down (or up) the apparent inertia of the coordinated device-proxy. By doing so, we can significantly improve transparency between multiple degree of freedom (possibly nonlinear) haptic device and virtual proxy. In other to use passive decomposition, disturbance observer of [3] is adopted to estimate human force with some dead-zone modification to avoid "winding-up" force estimation in the presence of device torque saturation. Some preliminary experimental results are also given to illustrate efficacy of the proposed technique.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.54 no.2
• /
• pp.55-65
• /
• 2012

In the winter season, when the ventilation system is operating, the fresh cold air from the slot-type openings of broiler house which directly reached the animal zone can cause various problems such as thermal stress, decreasing of feed and water consumption, occurrence of respiratory disease, and etc. Therefore it is very important to control the trajectory of aero-flow from the slot openings to induce an efficient thermal heat change. Jet-drop distance model was proposed to predict and control the jet-trajectory. However their study was restricted due to the small scaled model and difficulties of measuring the Jet-drop distance. In this study, CFD was applied to analyze qualitatively and quantitatively the jet-drop distance in a real broiler house. The various variables were considered such as installed slot-angle, designed ventilation rate, and the outdoor ambient temperature. From the present study, two linear-regression models using the Jet-drop factor and corrected Archimedes number, and their R-squared values 0.744 and 0.736, respectively, were used. From this study, the applicability of CFD on the analysis of Jet-drop distance model was confirmed.

• Journal of the Korean Institute of Educational Facilities
• /
• v.7 no.3
• /
• pp.23-35
• /
• 2000

Today the supply of school sports halls for multi-functional use is absolutely insufficient in school facilities of Korea. For economical reasons and efficiency of use, a joint utilization of these halls by schools, sports clubs and other users should be strived for. This will lead, as a result, to a minimization overall in the demand for halls. Above all to satisfy this demand, the regulations of sports facilities suitable to the students' standards of play and physical conditions must be preceded in Korea. And a study on the architectural planning of this hall size for primary, middle and high school is needed. This study aims at establishing the range of optimum size of school sports hall in Korea by surveying and analyzing the regulations of sports facilities about clear height of hall, obstacle-free zone and court area in Japan, England, Germany and U.S.A. Therefore, this study will offer valuable basic data in planning the school sports hall.

• Proceedings of the KSRS Conference
• /
• v.1
• /
• pp.282-285
• /
• 2006

This paper analyzed the characteristics of the Lossy JPEG of the meteorological satellite image, and analyzed the quality of the Lossy JPEG compression, which is proper for the LRIT(Low Rate Information Transmission) to be serviced to the SDUS(Small-scale Data Utilization Station) system of the COMS(Communication, Oceans, Meteorological Satellite). Since COMS is to start running after 2008, we collected the data of the MTSAT-1R(Multi-functional Transport Satellite -1R) for analysis, and after forming the original image to be used to LRIT by each channel and time zone of the satellite image data, we set the different quality with the Lossy JPEG compression, and compressed the original data. For the characteristic analysis of the Lossy JPEG, we measured PSNR(Peak Signal to Noise Rate), compression rate and the time spent in compression following each quality of Lossy JPEG compression. As a result of the analysis of the satellite image data of the MTSAT-1R, the ideal quality of the Lossy JPEG compression was found to be 90% in the VIS Channel, 85% in the IR1 Channel, 80% in the IR2 Channel, 90% in the IR3 Channel and 90% in the IR4 Channel.

• Journal of Welding and Joining
• /
• v.34 no.5
• /
• pp.26-32
• /
• 2016

In this study, Hot-wire laser welding (HWLW) without keyhole which deposits filler material by feeding hot wire into the process zone has been performed to increase process performance. From the analysis of High Speed Imaging (HSI), for higher voltage, the process is prone to arc formation and drop transfer, which is disagreeable transfer mode. It is necessary that arc formation and drop (globular) transfer should be avoided by lower voltage. Therefore, continuous wire melting and transfer mode is preferred when adopting this process. The HWLW technique has high potential in terms of performance, precision, robustness and controllability for thick section of narrow gap.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2006.05a
• /
• pp.127-131
• /
• 2006

There are being a lot of studies for achievement of high speed Dehydration, high-strength and Lightweight of washing machine in the latest washing machine business. It is essential that Press-joining Strength of Spin Drum Seaming division is improved .to attain that target. Generally, we are using Mechanical press-joining by Seaming and T.I.G (Tungsten Inert Gas) welding among part joint method. Mechanical press-joining method that is mainly using for Stainless Steel (STS430) Drum have lots of merit that consumption of energy is low more than welding and production costs cut down and generation of the corrosion is solved by removing weld zone defect and materials having different properties are enable to join without special equipment. But, it is difficult to realize joint strength required at high speed operation because joint strength of mechanical press-joining method is low remarkably in comparison with welding. Also, there are a lot of analysis difficulties and very limited research is under way due to the dynamic factor such as multistage plastic working, elastic recovery, residual stress etc. The results of this study show optimal joining condition for mechanical press-joining by performing lots of tensile joining strength test with various specimen under multi-change of important design factor such as seaming width, bead area and bead depth etc.