• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.1
• /
• pp.672-679
• /
• 2018

This paper describes a methodology for shape design using an optimal design system, whereas generally a three dimensional analysis is required for such designs. An automatic finite element mesh generation technique, which is based on fuzzy knowledge processing and computational geometry techniques, is incorporated into the system, together with a commercial FE analysis code and a commercial solid modeler. Also, with the aid of multilayer neural networks, the present system allows us to automatically obtain a design window, in which a number of satisfactory design solutions exist in a multi-dimensional design parameter space. The developed optimal design system is successfully applied to evaluate the structures that are used. This study used a stress gauge to measure the maximum stress affecting the parts of the side housing bracket which are most vulnerable to cracking. Thereafter, we used a tool to interpret the maximum stress value, while maintaining the same stress as that exerted on the spot. Furthermore, a stress analysis was performed with the typical shape maintained intact, SM490 used for the material and the minimizing weight safety coefficient set to 3, while keeping the maximum stress the same as or smaller than the allowable stress. In this paper, a side housing bracket with a comparably simple structure for 36 tons was optimized, however if the method developed in this study were applied to side housing brackets of different classes (tons), their quality would be greatly improved.

• Resources Recycling
• /
• v.27 no.1
• /
• pp.31-37
• /
• 2018

To enhance the recycling rate of used metal resources, it is strongly desired to develop a metal sorting system that can automatically identify metal type from mixed metal scraps and sort them separately. Laser-induced breakdown spectroscopy(LIBS) is a technique that enables real time classification of different metals based on multi-elemental and in-air analysis. In this work, we report the results of LIBS elemental analysis of field scrap samples acquired from a recycling company. By applying multivariate analysis, it was found that the LIBS signals of five different metals could be perfectly classified if surface contamination was removed. The classification accuracy degraded for LIBS signals including contaminant emission, which however could be overcome by performing the multivariate analysis using properly selected emission lines of higher correlation only. The significant improvement in classification accuracy and process speed by the selection of proper emission lines demonstrated the feasibility of LIBS technique as an industrial tool for metal scrap sorting.

• Nuclear Engineering and Technology
• /
• v.13 no.4
• /
• pp.264-276
• /
• 1981

A simulation procedure which can represent time-dependent nuclear characteristics of TRIGA Mark-III reactor is developed. CITATION, a multi-group diffusion-depletion program, has been utilized as calculational tool. The group structure employed in this study consists of 7 groups: -3-fast and 4-thermal-which is conventionally utilized in TRIGA type reactor analysis. Three-dimensional nuclear characteristics are synthesized by combining results from two-dimensional plane calculation and two-dimensional cylinder calculation, since direct three-dimensional approach is not yet possible. An effort ia made to develope a method which can extract effective zone and group dependent bucklings by neutron diffusion theory rather than conventional zone and/or group independent Ducklings by neutron transport theory, since neutron leakage is quite high for small core such as research reactors. It is turned out that the method developed in this study gives satisfactory results. The calculation is performed under assumptions that all control rods are fully withdrawn, that no samples are inserted in the irradiation holes and that the core is located in the center of the reactor pool. Burnup-dependent variation of core excess reactivity, time dependent change of Xe-135 poisoning and reactivity worth of rotary specimen rack are calculated and compared with operation records. Neutron flux and power distribution as well as neutron spectrum in each irradiation .facility are presented.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.7 no.3
• /
• pp.13-21
• /
• 2004

The dissemination of commercial satellite images. which have the high spatial resolution such as aerial photos, are the active trend in remote sensing community because of the recent development in satellite and sensor technology. Such high resolution satellite images provide a unique tool for the monitoring of ongoing urban land use change. Especially KOMPSAT-1, which was launched at December 1999 and successfully operated up to now, provides repeatedly panchromatic images over Korean peninsula, which has the spatial resolution of 6.6m. Based upon this KOMPSAT-1 EOC image data we can try to analyze and assess the temporal urban land use change, which could not be done because lack of such data. The aim of this paper is to analyze and assess the spatial land use characteristics of Daejeon Metropolitan City based on KOMPSAT-1 EOC data. The land use map of year 2001 is generated through the modification of the year 2000 land use map, which is published by National Geographic Information Institute, using visual interpretation of KOMPSAT-1 EOC image which is acquired in year 2001. This study can be the start point of the time series analysis of the long term land use change monitoring mit KOMPSAT-1 EOC data.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.16 no.2
• /
• pp.73-82
• /
• 2017

In this research, we tried to check the applicability of a Chow test to the linear models which are generated in the process of transportation planning or traffic flow analyses. The Chow test is a very popular statistical method which is being used to see if the coefficients from two separate linear regression models are equal or not. In order to prove the effectiveness of the Chow test, we found the linear relationships between speed and density under the situations such as driving in daytime and in nighttime on a rainy day. Based on the two months of Joong-Bu Expressway traffic data, we proved that the Chow test is useful to testify the similarity between two linear regression models. And this statistical tool seems to be able to have a very important role in traffic flow analysis or in transportation planning process. Finally, we expect the Chow test be implemented even to the non-linear regression models or to the multi-variate models.

• Korean Journal of Agricultural Science
• /
• v.42 no.1
• /
• pp.29-35
• /
• 2015

This study was performed to analyze the distribution and antimicrobial resistance of pathogenic microorganisms isolated from the carcass and environments of chicken processing plant located in Gyeonggi province from October to November in 2010. Chicken slaughterhouse was visited 3 times and totally 40 samples were collected from chicken carcass before and after washing (n=14), chicken cuts (n=7), cooling water (n=8), brine (n=2), cutting knives (n=7) and working plate (n=2). Whole-chicken rinsing technique (for chicken carcasses) and swab technique (for working plate and knives) were used to analyze the distribution of pathogenic microorganisms. In addition, brine and chilling water from storage tanks were gathered using sterilized tubes and used as samples. The matrix-assisted laser desorption/ionization mass spectrometry (MALDI MS) for whole cell fingerprinting in combination with a dedicated bioinformatic software tool was used to identify the isolated microorganisms. The pathogenic microorganisms, such as Bacillus cereus (n=8) and Staphylococcus aureus (n=9), were isolated form the chicken processing process (chicken carcasses of before and after chilling, chicken cuts, and working plate). The antimicrobial susceptibility of those isolated microorganisms was analyzed using 21 antimicrobial agents. In the case of B. cereus, it showed 100% of resistance to subclasses of penicillins and peptides, and it also resistant to cephalothin, a member of critically important antimicrobials (CIA), however there was no resistance (100% susceptible) to vancomycin and chloramphenicol. S. aureus showed 100% resistance to subclasses of peptides and some of penicillins (penicillin and oxacillin), however, it showed 100% susceptibility to cephalosporins (cefazolin and cephalothin). All of the tested pathogens showed multi drug resistance (MDR) more than 4 subclasses and one of B. cereus and S. aureus showed resistance to 9 subclasses. After the ban on using the antimicrobials in animal feed in July 2011, there would be some change in microbial distribution and antimicrobial resistance, and it still has a need to be analyzed.

• Journal of the Korea Computer Graphics Society
• /
• v.15 no.3
• /
• pp.1-9
• /
• 2009

Traditional computer simulation uses only traditional input and output devices. With the recent emergence of haptic techniques, which can give users kinetic and tactile feedback, the field of computer simulation is diversifying. In particular, as the virtual-reality-based surgical simulation has been recognized as an effective training tool in medical education, the practical virtual simulation of surgery becomes a stimulating new research area. The surgical simulation framework should represent the realistic properties of human organ for the high immersion of a user interaction with a virtual object. The framework should make proper both haptic and visual feedback for high immersed virtual environment. However, one model may not be suitable to simulate both haptic and visual feedback because the perceptive channels of two feedbacks are different from each other and the system requirements are also different. Therefore, we separated two models to simulate haptic and visual feedback independently but at the same time. We propose an adaptive mass-spring method as a multi-modal simulation technique to synchronize those two separated models and present a framework for a dual model of simulation that can realistically simulate the behavior of the soft, pliable human body, along with haptic feedback from the user's interaction.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.9 no.2
• /
• pp.23-33
• /
• 2014

This paper aims at delivering significant implications to high-tech startups by visualizing the implementation process of leading KOSDAQ listed companies's business model. This paper founded two meaningful outcomes; first, hish-tech starts-up make a clear direction of implementing intangible business model in real business, second, targeting the role model of benchmarking business model among leading companies, by linking common feature between high-tech starts-up and leading KOSDAQ listed venutures sharing one of Key performance indexes falls on viable business model. The research results of visualizing the implementation of leading KOSDAQ listed ventures' business model shows three major implications. First, business model indicates not just simple logic of creating and delivering values, but more shows CEO leading management vehicle. Second, business model represents the multi-dimension process itself of integrating in and out company's core assets and competencies initiated by CEO. Third, financial outcomes of business model is automatic result of implementing on setting target customer, creating value, and delivering it rather than planned strategically. Fourth, the focal points of implementing business model falls on collecting real information from business sites.

• The Journal of the Acoustical Society of Korea
• /
• v.23 no.8
• /
• pp.554-561
• /
• 2004

As the technologies of semiconductor and multimedia communication have been improved. the high-quality video and the multi-channel audio have been highlighted. MPEG Audio Layer 3 decoder has been implemented as a Processor using a standard. Since the synthesis filter of MPEG-1 Audio Layer 3 decoder requires the most outstanding operation in the entire decoder. the synthesis filter that can reduce the amount of operation is needed for the design of the high-speed processor. Therefore, in this paper, the synthesis filter. the most important part of MPEG Audio, is materialized in FPGA using the method of DAULT (distributed arithemetic look-up table). For the design of high-speed synthesis filter, the DAULT method is used instead of a multiplier and a Pipeline structure is used. The Performance improvement by 30% is obtained by additionally making the result of multiplication of data with cosine function into the table. All hardware design of this Paper are described using VHDL (VHIC Hardware Description Language) Active-HDL 6.1 of ALDEC is used for VHDL simulation and Synplify Pro 7.2V is used for Model-sim and synthesis. The corresponding library is materialized by XC4013E and XC4020EX. XC4052XL of XILINX and XACT M1.4 is used for P&R tool. The materialized processor operates from 20MHz to 70MHz.

• Korean Journal of Environment and Ecology
• /
• v.26 no.6
• /
• pp.941-951
• /
• 2012

The changes of forest habitats and maeulsoops(village forests) in Jinan-gun, Jeollabuk-do, South Korea are examined using landscape indices and morphological pattern analysis, and their landscape-ecological implications on conserving biological diversity are presented. We used FRAGSTATS and GUIDOS software, as well as land cover maps(of 1989 and 2006) to analyze the spatial and temporal patterns of habitat composition and configuration in surrounding landscapes of 34 representative maeulsoops and Jinan-gun. The results showed decreases in the amount of core habitats and corridors and habitat connectivity at a regional scale since 1989. In addition, multi-scale habitat analysis at a focal scale revealed that the structural and functional connectivity between forest habitats surrounding maeulsoops of the year 2006 was lower than that of the year 1989. In order to reduce forest fragmentation and to enhance the connectivity among habitats, it is necessary to provide the additional habitat corridors as well as preserving existing corridors and surrounding landscapes of maeulsoops. We also suggest that a combination of landscape indices and morphological spatial pattern analysis can provide an effective tool to assess the habitat functions and configuration in a rapidly changing landscape.