• 대한기계학회논문집A
• /
• 제28권5호
• /
• pp.532-538
• /
• 2004

MEMS technology applying to the sensors and micro-electro devices is complete system. These microsystems are made by variable processes. Especially, the mentallization process has very important functions to transfer the power operating the sensor and signal induced from sensor part. But in the structures of MEMS the local stress concentration and deformation are often yielded by an irregular geometrical shape and different constraint. Therefore, this paper studies the effect of supporting type and thickness ratio about thin film of the substrate on the residual stress variation when the thermal loads is applied to the multi-layer thin film fabricated by metallization process. Specimens were made from several materials such as Al, Au and Cu. Then, uniform thermal load was applied, repeatedly. The residual stress was measured by FE Analysis and nano-indentation method using AFM. Generally, the specimen made of Al induced the larger residual stress than that of made of other materials. Specimen made of Cu and Au having the low thermal expansion coefficient induces the minimum residual stress. Similarly, the lowest indentation length was measured by nano-indentation method in the Si/Au/Cu specimen. Particularly, clusters are created in the specimen made of Cu by thermal load and the indentation length became increasingly large by cluster formation.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2004년도 전력전자학술대회 논문집(1)
• /
• pp.425-429
• /
• 2004

A new multi-level type energy recovery sustaining driver for AC PDP(Plasma Display Panel) is proposed in this paper. The multi-level driver has been developed to reduce the voltage stress on switching elements. Comparing the proposed driver with the conventional multi-level driver, 4 switching elements, 4 diodes, and two auxiliary capacitors are eliminated in the viewpoint of circuit structure. Moreover, the voltage stress on switching elements is more reduced and the sustain period is extended. To verify the validity of the proposed energy recovery circuit, computer simulations using PSpice program are carried out.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2011년도 춘계학술발표대회 논문집
• /
• pp.185-190
• /
• 2011

The important use of the desuperheater(multi spray type) changes the superheated steam into the saturated steam. It is more efficient and suitable for using the process. Also, it is more convenient and stable regarding the process temperature control. In this study, transient and quasi-static analysis were done for the evaluation of structural integrity of the multi spray type desuperheater of the power plant. Computational analysis was used to calculate the thermal stress, and the vibration test was done to evaluate the structural stability. This paper is verified by analysis that water spray nozzle(${\phi}=28mm$) shows the best ability. The results show that structural stability of the desuperheater under the real operating condition was proven.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제13권1호
• /
• pp.848-857
• /
• 2021

This paper proposes an efficient approach based on a machine learning technique to predict the local stresses on mooring chain links. Three-link and multi-link finite element analyses were conducted for a target chain link of D107 with steel grade R4; 24,000 and 8000 analyses were performed, respectively. Two serial Artificial Neural Network (ANN) models based on a deep multi-layer perceptron technique were developed. The first ANN model corresponds to multi-link analyses, where the input neurons were the tension force and angle and the output neurons were the interlink angles. The second ANN model corresponds to the three-link analyses with the input neurons of the tension force, interlink angle, and the local stress positions, and the output neurons of the local stress. The predicted local stresses for the untrained cases were reliable compared to the numerical simulation results.

• 한국전자통신학회논문지
• /
• 제8권5호
• /
• pp.771-777
• /
• 2013

우리나라 다문화가정 청소년들을 대상으로 스트레스와 자살생각과의 관련성을 파악하고자 2011년 7차와 2012년 8차 청소년건강행태 온라인조사의 자료를 통합하여 남학생 607명, 여학생 543명을 대상으로 자살생각과의 관련요인을 스트레스의 원인을 중심으로 파악하고자 하였다. 통계 프로그램은 SPSS version 17.0을 이용하였다. 통계분석시 부모 두 분 중 한분이 태어난 곳이 한국이 아닌 학생을 다문화가정 청소년으로 하였고, 통계적 유의성은 p<0.05로 하였다. 자살생각 유무를 종속변수로 하여 자살생각과 스트레스 원인과의 관련성을 알아보고자 단순 로지스틱 회귀분석을 통해 비차비(Odds Ratio, OR)를 산출 하였으며, 복합표본을 설정하여 분석을 하였다. 남학생의 경우 교우들과의 문제로 인한 스트레스를 받은 학생의 자살생각이 2.70배 높았고, 여학생의 경우 부모님과의 갈등으로 인한 스트레스를 받는 학생의 자살생각이 2.50배 높았다. 결론적으로 다문화가정의 청소년들의 자살생각에 영양을 미칠 수 있는 개인, 가정, 학교생활과 관련된 여러 스트레스의 원인 중 부모와 친구들과의 관계개선을 통해 다문화가정의 청소년의 자살 생각의 예방과 관리를 위해 사회적인 관심이 필요하다고 생각된다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2015년도 제49회 하계 정기학술대회 초록집
• /
• pp.204.1-204.1
• /
• 2015

We studied the electrical properties and gate bias stress (GBS) stability of thin film transistors (TFTs) with multi-stacked InZnO layers. The InZnO TFTs were fabricated via solution process and the In:Zn molar ratio was 1:1. As the number of InZnO layers was increased, the mobility and the subthreshold swing (S.S) were improved, and the threshold voltage of TFT was reduced. The TFT with three-layered InZnO showed high mobility of $21.2cm^2/Vs$ and S.S of 0.54 V/decade compared the single-layered InZnO TFT with $4.6cm^2/Vs$ and 0.71 V/decade. The three-layered InZnO TFTs were relatively unstable under negative bias stress (NBS), but showed good stability under positive bias stress (PBS).

• Journal of Power Electronics
• /
• 제19권2호
• /
• pp.431-442
• /
• 2019

This paper proposes a unified high-frequency bipolar buck-boost (UHFBB) control strategy for a dual-active-bridge (DAB), which is derived from the classical buck and boost DC/DC converter. It can achieve optimized current stress of the switches and soft switching in wider range. The UHFBB control strategy includes multi-control-variables, which can be achieved according to an algorithm derived from an accurate mathematical model. The design method for the parameters, such as the transformer turns ratio and the inductance, are shown. The current stress of the switches is analyzed for selecting an optimal inductor. The analysis is verified by the experimental results within a 500W prototype.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제12권1호
• /
• pp.146-156
• /
• 2020

Two High Tensile Strength Steel (EH47) plates with thickness of 70 mm were butt-welded together by multi-pass Submerged Arc Welding (SAW), also the hardness and welding residual stress were investigated experimentally. Based on Thermal-Elastic-Plastic Finite Element (TEP FE) computation, the thermal cycles during entire welding process were obtained, and the HAZ hardness of multi-pass butt welded joint was computed by the hardenability algorithm with considering microstructure evolution. Good agreement of HAZ hardness between the measurement and computational result is observed. The evolution of each phase was drawn to clarify the influence mechanism of thermal cycle on HAZ hardness. Welding residual stress was predicted with considering mechanical response, which was dominantly determined by last cap welds through analyzing its formation process.

• 한국산학기술학회논문지
• /
• 제11권9호
• /
• pp.3176-3183
• /
• 2010

본 논문은 다축 하중을 받는 복합재 압력용기의 멀티 스케일 피로수명 예측 방법을 제시하였다. 멀티 스케일 접근법은 복합재료의 기본 구성재료인 섬유, 기지 및 섬유/기지 경계면의 거동으로부터 복합재 플라이, 적층판 및 구조물의 전체 거동을 예측한다. 멀티 스케일 피로수명은 거시적 응력 해석과 미시적 피로파손 해석을 통해 예측된다. 유한요소법을 이용하여 복합재 압력용기의 적층판에 가해지는 다축 피로하중을 구하며, 고전적층판이론을 이용하여 적층판의 플라이 응력을 계산하였다. 미소역학 모델을 이용하여 플라이 응력으로부터 각각 섬유, 기지 및 섬유/기지 경계면에 발생되는 응력을 계산하였다. 복합재 구성재료의 피로수명은 섬유에 대해서는 최대응력법을, 기지에 대해서는 등가응력법을, 섬유/기지 경계면에 대해서는 임계평면법을 사용하였다. 평균응력을 고려하기 위하여 수정된 Goodman 식을 적용하였다. 모든 피로하중에 의한 손상은 Miner 법칙을 이용하여 선형 누적이 되고, 이를 통해 최종 피로파손을 판단한다. 섬유와 기지의 물성값, 섬유체적비 및 와인딩 각도의 확률분포에 따른 복합재 압력용기의 피로수명 영향을 분석하기 위해 몬테카르로 시뮬레이션을 수행하였다.

• Tribology and Lubricants
• /
• 제11권2호
• /
• pp.24-33
• /
• 1995

This paper presents the contact stress distributions between the multi-contact bodies and the total reaction forces for various types of contact geometry for multi-load slewing ring bearings. The FEM results indicate that the slope of the roller type of slewing ring bearing has slightly steeper than that of the ball type. This is because the roller type wire race bearings is stiffer than the ball type bearing. The total reaction force of ball type slewing bearing shows much higher than that of wire race slewing bearings.